How do you add a driver to a pfSense install?
-
I am running the latest dev branch 2.7.* hoping it might snag the driver, but it did not.
Would you kindly help me "load it from FreeBSD" ? This is where being new to this, I quickly get stuck.
Many thanks
-
@stephenw10 said in How do you add a driver to a pfSense install?:
@f4-0 said in How do you add a driver to a pfSense install?:
I checked my machine with uname -a, it shows freeBSD 14 is installed.
Then it isn't running 2.6. What pfSense version are you running?
The aquantia driver or kmod pkg is not included in any pfSense version yet though.
You would need to load it from FreeBSD. Though it looks like there are no port builds for FreeBSD 14 yet.
Steve
[https://github.com/Aquantia/aqtion-freebsd](link url)
People on the net are pointing me here, is this viable?
-
You can attempt to compile it yourself from the source, yes. However installing from the kmod port is much easier if it exists. Also the fact there is no port for FreeBSD 14 yet may mean there are issues compiling it currently.
If you just want to get that running I would reinstall 2.6 and install the kmod pkg.Steve
-
@stephenw10 said in How do you add a driver to a pfSense install?:
You can attempt to compile it yourself from the source, yes. However installing from the kmod port is much easier if it exists. Also the fact there is no port for FreeBSD 14 yet may mean there are issues compiling it currently.
If you just want to get that running I would reinstall 2.6 and install the kmod pkg.Steve
Would that be the :12: package noted above? I did this before posting here and it did not recognize the driver. It still shows as "none" in pciconf.
I am going to redo it in case something was off.
-
Yes, the kmod pkg for FreeBSD12.
That chip ID (0x94c0) is not listed in the driver though:
https://github.com/Aquantia/aqtion-freebsd/blob/master/aq_main.c#L91So I would not expect it to work.
...which is actually what I said in the other thread so nothing looks to have changed since then.
Steve
-
@stephenw10 said in How do you add a driver to a pfSense install?:
Yes, the kmod pkg for FreeBSD12.
That chip ID (0x94c0) is not listed in the driver though:
https://github.com/Aquantia/aqtion-freebsd/blob/master/aq_main.c#L91So I would not expect it to work.
...which is actually what I said in the other thread so nothing looks to have changed since then.
Steve
My card is the ASUS XG-C100C.
When I do a pciconf -lvb, I don't see the chip mentioned.
It shows AQC113CS
I did some more digging and found a pathway via the Linux download.
https://www.asus.com/networking-iot-servers/wired-networking/all-series/xg-c100c/helpdesk_download/?model2Name=XG-C100C
I have attached the readme file which specifies how to build the driver. Is it reasonable for me to try this?
To not trash the post, the read me snippet will be in the next post....
-
No, not unless it includes a FreeBSD driver. Which I very much doubt it does.
About the only thing you could try would be to add the device ID to the FreeBSD driver and try to compile it yourself with that. You'd have to hope that chip is sufficiently similar to one of the other supported chips that it can be used.
Otherwise it will require development work to the driver. There may be some discussion of that over in the FreeBSD forums. And if I was doing this I would first try to make it work in a standard FreeBSD install.Steve
-
@stephenw10 said in How do you add a driver to a pfSense install?:
No, not unless it includes a FreeBSD driver. Which I very much doubt it does.
About the only thing you could try would be to add the device ID to the FreeBSD driver and try to compile it yourself with that. You'd have to hope that chip is sufficiently similar to one of the other supported chips that it can be used.
Otherwise it will require development work to the driver. There may be some discussion of that over in the FreeBSD forums. And if I was doing this I would first try to make it work in a standard FreeBSD install.Steve
https://forums.freebsd.org/threads/is-there-going-to-be-support-for-the-asus-xg-c100c-baked-into-a-release-anytime-soon.76401/
It looks like someone has done it on freeBSD, and there is a link to this page:
https://www.freshports.org/net/aquantia-atlantic-kmod
I wish I knew more, but is this what is needed?
I am happy to try anything here, I am dead in the water unless I get this card to work so tell me what to do. I can blast this install anytime and start over. I just want to make an effort at getting this up and running.
-
This looks active as of 2 days ago.
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=267348#c6
-
Yup. But it looks like Asus changed the chipset on the NIC and helpfully didn't bother updating the model number. The card that thread referenced was an AQC107:
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=238324It is supported in Linux: https://github.com/Aquantia/AQtion/blob/master/aq_common.h#L54
-
Reading into this, its not copy/paste :)
I am going to shift this to a thread on FreeBSD, you have been tremendously helpful.
-
I tested the Ubuntu install via thumb drive, it works without an issue, and the NIC connects at 5G as expected.
Indeed, linux works.
I think I have a temporary solution, I am going to use KVM and virtualize the instance of pfSense. This should use the native Linux drivers, and give me the pfSense router.
I'm running the install now and will report back if it works. I'm sure this is not ideal, but as a stop gap until the card is supported, I can live with it.
-
A lot of interesting progress, I am going to start a new thread since I am facing a new set of issues, but in general the Ubuntu base install + KVM + pfSense works (partly so far).
I learned a lot about KVM... great piece of kit for Linux, running natively that way.
-
A Antibiotic referenced this topic on
