webConfig not showing IP on working interface after upgrade to pfSense+

[moonstar]

HI!

After upgrading to pfSense+ from Community edition have this issue.
Tried reconfigure WAN2 interface IP with no effect.
Gateway monitor also not working (

Widget

Interfaces

# ifconfig
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: WAN2
        options=2009<RXCSUM,VLAN_MTU,WOL_MAGIC>
        ether 00:d0:b7:4d:f9:5c
        inet6 fe80::2d0:b7ff:fe4d:f95c%fxp1 prefixlen 64 scopeid 0x3
        inet 46.98.248.134 netmask 0xfffffffc broadcast 46.98.248.135
        groups: WANs
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

[stephenw10]

Hmm, odd. You upgraded from 2.6 where it was working as expected?

Is it still passing traffic as expected?

Just not showing in the Interfaces Widget and no gateway monitoring?

Do you see the gateway present in System > Routing?

I think you might be hitting a variation of this: https://redmine.pfsense.org/issues/14057
Though it looks like it's a static IP. If the gateway is named with mixed cases try re-creating as all upper case.

Steve

[moonstar]

Somehow Virtual IP of WA2 was created.
Just removed it and all back to normal
Thanks!