Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Can PfSense be installed onto a VP4670 – 6 Port ?

    Scheduled Pinned Locked Moved
    Hardware
    5
    9
    1.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      Chipperh
      last edited by

      I recently purchased the VP4670 – 6 Port Intel® i7 in order to install PfSense onto it and use it as a firewall. I have installed PFSense, and believe I have configured the WAN port and the LAN port correctly, but I am unable to log into it (192.168.1.1) when placed in line between my modem and network. I configured just 2 of the 6 ports.
      If there are any guides on installing PFSense onto this or a similar platform, I would be very appreciative of a pointer in the correct direction.
      Thank you in advance -
      Chip

      1 Reply Last reply Reply Quote 0
      • AndyRHA
        AndyRH
        last edited by

        Just a thought, does the WAN side have a public address or the common 192.168.1.0 subnet? If the WAN is in 192.168.1.0/24 that would explain your problem.

        o||||o
        7100-1u

        C 1 Reply Last reply Reply Quote 0
        • C
          Chipperh @AndyRH
          last edited by

          @andyrh,
          Thanks for the quick view and response -

           I am using Port1 (igc0) as the WAN port.  indicates no IP address assigned to that port.  I have set up Port2 (igc1) as the LAN port.  Indicates IP   v4: 192.168.1.1/24

          I connected Port1 to the Modem, and Port 2 directly to my computer; attempted to connect via a browser to the IP address ( both 192.168.1.1 and 192.168.1.1/24) with no response.

          Chip

          bingo600B 1 Reply Last reply Reply Quote 0
          • bingo600B
            bingo600 @Chipperh
            last edited by

            @chipperh
            I'm quite sure Andy was asking what ip address (range) your modem would be handing out to the pfSense Wan interface (if set to DHCP).

            If that by any chance would be the same network as you have selected for Lan, you might have that issue.

            /Bingo

            If you find my answer useful - Please give the post a 👍 - "thumbs up"

            pfSense+ 23.05.1 (ZFS)

            QOTOM-Q355G4 Quad Lan.
            CPU  : Core i5 5250U, Ram : 8GB Kingston DDR3LV 1600
            LAN  : 4 x Intel 211, Disk  : 240G SAMSUNG MZ7L3240HCHQ SSD

            C 1 Reply Last reply Reply Quote 1
            • C
              Chipperh @bingo600
              last edited by

              @bingo600
              Rgr all - The modem IP is 192.168.100.1 - which worked when connected to the ASUS wireless router (192.168.1.1) that did the DHCP before I removed it to install the Protectli with Pfsense in its place.

              Chip

              bingo600B 1 Reply Last reply Reply Quote 0
              • bingo600B
                bingo600 @Chipperh
                last edited by bingo600

                @chipperh
                What ip address does your PC get when connected to Port2 on the protecli ?
                What ip address does the ASUS get (on wan) , when connected to your modem

                How did you install pfSense on the protecli ?
                Did you use screen/keybd ?

                Can you logon to the pfSense via screen/keybd (console login) ?

                Did you install the VGA or Serial pfSense package ?

                /Bingo

                If you find my answer useful - Please give the post a 👍 - "thumbs up"

                pfSense+ 23.05.1 (ZFS)

                QOTOM-Q355G4 Quad Lan.
                CPU  : Core i5 5250U, Ram : 8GB Kingston DDR3LV 1600
                LAN  : 4 x Intel 211, Disk  : 240G SAMSUNG MZ7L3240HCHQ SSD

                C 1 Reply Last reply Reply Quote 0
                • C
                  Chipperh @bingo600
                  last edited by

                  This post is deleted!
                  1 Reply Last reply Reply Quote 0
                  • W
                    weesteev
                    last edited by

                    Sorry for Necro-ing this thread but I have a similar issue with the VP4670. I have installed pfSense 2.6, configured only 2 ports (IGC0 for WAN and IGC1 for LAN) but get no LAN connectivity at all. The device is reporting an external IP on the WAN side but nothing on the LAN. Initially I was connected through a QNAP 10G switch so have removed that and connected directly to port 2 (IGC1) but Im only getting a 169 IP. Is there an obvious configuration that I have missed here?

                    1 Reply Last reply Reply Quote 0
                    • jimpJ jimp moved this topic from Problems Installing or Upgrading pfSense Software on
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      If it has 6 ports you may be using the wrong NIC. Try running ifconfig at the command line and see which NICs show as UP and linked.

                      1 Reply Last reply Reply Quote 0
                      • First post
                        Last post