my /boot/loader.conf-are these supposed to be there?
-
So I opened my /boot/loader.conf and this is whats in there and I don't remember these being here before the upgrade to 23.01 is this normal, especially the debug and below ones
kern.cam.boot_delay=10000
kern.ipc.nmbclusters="1000000"
opensolaris_load="YES"
zfs_load="YES"
boot_serial="NO"
autoboot_delay="3"
debug.ddb.capture.bufsize="524288"
hw.e6000sw.default_disabled=1
hint-model.4100_6100_6200_8200.cordbuc.0.at="isa"
hint-model.4100_6100_6200_8200.cordbuc.0.port="0x800"
hint-model.4100_6100_6200_8200.gpioled.0.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.0.pins="0x001"
hint-model.4100_6100_6200_8200.gpioled.0.name="red1"
hint-model.4100_6100_6200_8200.gpioled.0.invert="1"
hint-model.4100_6100_6200_8200.gpioled.1.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.1.pins="0x002"
hint-model.4100_6100_6200_8200.gpioled.1.name="green1"
hint-model.4100_6100_6200_8200.gpioled.1.invert="1"
hint-model.4100_6100_6200_8200.gpioled.2.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.2.pins="0x004"
hint-model.4100_6100_6200_8200.gpioled.2.name="blue1"
hint-model.4100_6100_6200_8200.gpioled.2.invert="1"
hint-model.4100_6100_6200_8200.gpioled.3.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.3.pins="0x008"
hint-model.4100_6100_6200_8200.gpioled.3.name="amber1"
hint-model.4100_6100_6200_8200.gpioled.3.invert="1"
hint-model.4100_6100_6200_8200.gpioled.4.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.4.pins="0x010"
hint-model.4100_6100_6200_8200.gpioled.4.name="red2"
hint-model.4100_6100_6200_8200.gpioled.4.invert="1"
hint-model.4100_6100_6200_8200.gpioled.5.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.5.pins="0x020"
hint-model.4100_6100_6200_8200.gpioled.5.name="green2"
hint-model.4100_6100_6200_8200.gpioled.5.invert="1"
hint-model.4100_6100_6200_8200.gpioled.6.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.6.pins="0x040"
hint-model.4100_6100_6200_8200.gpioled.6.name="blue2"
hint-model.4100_6100_6200_8200.gpioled.6.invert="1"
hint-model.4100_6100_6200_8200.gpioled.7.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.7.pins="0x080"
hint-model.4100_6100_6200_8200.gpioled.7.name="amber2"
hint-model.4100_6100_6200_8200.gpioled.7.invert="1"
hint-model.4100_6100_6200_8200.gpioled.8.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.8.pins="0x100"
hint-model.4100_6100_6200_8200.gpioled.8.name="red3"
hint-model.4100_6100_6200_8200.gpioled.8.invert="1"
hint-model.4100_6100_6200_8200.gpioled.9.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.9.pins="0x200"
hint-model.4100_6100_6200_8200.gpioled.9.name="green3"
hint-model.4100_6100_6200_8200.gpioled.9.invert="1"
hint-model.4100_6100_6200_8200.gpioled.10.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.10.pins="0x400"
hint-model.4100_6100_6200_8200.gpioled.10.name="blue3"
hint-model.4100_6100_6200_8200.gpioled.10.invert="1"
hint-model.4100_6100_6200_8200.gpioled.11.at="gpiobus0"
hint-model.4100_6100_6200_8200.gpioled.11.pins="0x800"
hint-model.4100_6100_6200_8200.gpioled.11.name="amber3"
hint-model.4100_6100_6200_8200.gpioled.11.invert="1"
hint-model.7100.mdio.0.at="ix2"
hint-model.7100.e6000sw.0.addr=0
hint-model.7100.e6000sw.0.is6190=1
hint-model.7100.e6000sw.0.port0disabled=1
hint-model.7100.e6000sw.0.port9cpu=1
hint-model.7100.e6000sw.0.port10cpu=1
hint-model.7100.e6000sw.0.port9speed=2500
hint-model.7100.e6000sw.0.port10speed=2500
net.link.ifqmaxlen="128" -
Yes, there is one serial image now shared with all hardware. Those model hints don't do anything except on the listed Netgate devices. That's expected
Steve
-
@stephenw10 thank you kindly sir I was downvoted on the reddit for this same question I appreciate your time.
