My pfsense log is said "periph destroyed"

[kesiqle]

After I boot my pfsense, after 5-10 minutes, I can't access my dashboard and the pfsense said "periph destroyed"

Code:
ada0: <WD3 WD20EZAZ-00GGJB0 80.00A80> s/n WD-WXS1A887NVRU detached
(ada0: ahcinch2:0:0:0): Periph destroyed
ada0 at ahcich2 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD20EZAZ-00GG 80.00A80> ACS-3 ATA SATA 3.x device
ada0: Serial Number WD-WXS1A887NVRU
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PI) 8192bytes)
ada0: Command Queueing enabled
ada0:1907729MB (3907029168 512 byte sectors)
ses0: ada0,pass1 in 'Slot 02', SATA Slot: scbus2 target 0

[stephenw10]

I would guess it's a failing drive. An ada device like that should never detach. Unless maybe it's in a USB adapter or similar.

Steve

[kesiqle]

@stephenw10
I don't know either, because my hard disk drive is: wdc wd20ezaz-00ggjb0 and I don't know what's going on.

[stephenw10]

I would replace it.