multiple phase 2 to the same destination but different source

[NL2023]

Hi

Is it possible to create multiple phase2s for 1 tunnel to the same destination?

With 1 of these I want to apply BINAT so that I cannot increase the source subnet.

Example :

P2s :
source 192.168.1.1/32 destination 192.168.2.0 /24
source 192.168.1.2/32 NAT 192.168.3.2 destination 192.168.2.0/24

I have tested the above, but the 2nd p2 does not come up.

ip needs the nat address because unfortunately it cannot be changed and is hardcoded in the software.

[NL2023]

recreated in a different order and now it works. first the phase2 without NAT and then the one with NAT.
Topic can be closed