Settings from Sonic Wall
-
a client has a software that requires remote printing using IP Sec.
and the vendor only knows settings for Sonic Wall.
Can anyone help to convert the settings to pfSense?
Thanks in Advance.This is what was provided:
PSK: MULTACOM276
M276 SERVER = 10.10.xx.xx
THE SUBNET WE HAVE ON FILE FOR YOU IS 192.168.xx.xx
OUR GATEWAY = xxx.xxx.xxx.xxx
PHASE 1
IKEV2 MODE
DH GROUP = GROUP 2
ENCRYPTION = 3DES
AUTHENTICATION = SHA1
LIFETIME = 86400
PHASE 2
PROTOCOL = ESP
ENCRYPTION = AES-128
AUTHENTICATION = SHA 1
LIFETIME = 28800
-
@calical
These are pretty basic IPSec settings.
If you go through the setup you should be able to find the proper parameters to state them. -
@calical https://docs.netgate.com/pfsense/en/latest/vpn/ipsec/configure.html