Pfsense keeps crashing
-
@tjabas said in Pfsense keeps crashing:
will i also loose the boot
No, of course not.
That why you make these regular daily Diagnostics > Backup & Restore Backup & Restore
And that's why you've set up Services > Auto Configuration Backup > SettingsA new disk means of course : you need a install media, an USB drive with the 'latest'.
After install, import de config. Reboot. Done.@tjabas said in Pfsense keeps crashing:
icap interface,clam antivirus,squid and squidguard
These can produce a lot of disk activity.
If the drive is 'small', a lot of sectors will be rewritten often. That's what kills even the best SSD. -
thanks for your help, maybee ill have to stop using these programs i use in pfsense, the last pfsense hardware i used lasted for 12years without any problems at all, and this brand new device lasted 2 weeks.
-
Even the worst current SSD should last waaaaay longer than that. There were some early SSDs that had bad firmware or controllers in which the wear leveling was completely broken. But if that was 256GB it probably wasn't one of them. Just a bad device.
Steve
-
@stephenw10 yes that sucks, someone in this tread mentioned autoconfig backup, i usually do backups and save them on my laptop, but what does the autoconfig backup do? and where do pfsense store that backup?
-
ACB encrypts the config file and sends it to our servers. The key remains in the firewall, we are unable to see those configs.
It can be configured to backup periodically or at every config change.
https://docs.netgate.com/pfsense/en/latest/backup/autoconfigbackup.html
Steve
-
-
I was running into the same issue with my SSD. I decided to run pfSense with RAM disk enabled with hourly writes of system logs, RRD, and DHCP leases. The only package that I have running that requires an SSD/HDD is pfBlockerNG. It's been stable for over a week now (8 Days 06 Hours). Whereas before, I would have to hard reset every day.
It might be worth trying doing the same just to see if it works for you. It might save you some time.
I'm hesitant to buy another SSD (I live where returning items isn't so easy) because I found another person on reddit ahcich1 timeout, CAM command timeout who experienced the same issue on the same device running pfSense that I do (HP T620 Plus). That person experienced the same issue with a new SSD in two separate devices of the same model (HP T620 Plus). Before enabling RAM drive, I tried various settings in the BIOS and sysctl no avail.
-
@mentisdominus said in Pfsense keeps crashing:
I would have to hard reset every day
That's the perfect way to break your drive 'logically' : the file system becomes a mess, the drive partition becomes read-only, which triggers run time failures, as the OS can't write files anymore.
Easy to understand : take your own PC : remove power / remove battery, repeat several times and your system goes into eternal blue screen mode. It's re install time, version 'from the ground up' which mans : partition hard drive, destructive re format, the big total.A normal (== good ?) pfSense system never reboots or fails.
Netgate devices tend to deliver on that criteria. -
@Gertjan The system was suspended showing the error message along the lines of "Solaris: zpool 'pfSense' has encountered an uncorrectable I/O error the system is suspended". There was no way to login/ssh into it to restart it or enter a keyboard command to restart.
Hard resettingHard reboot was the only way I know how to restart it.Edit: I previously wrote "hard reset" in my previous comments as instead of "hard reboot"; as in, physically holding down the power button to turn it off and then pressing it again to power it back on. I went back to correct that part.
-
Yes, from there you can really only reset.
That sounds like a possible drive controller issue though if it happens repeatedly even after reinstalling. Or across multiple drives.
