Missing Gateway and static route in webGUI on 2nd node but appears in routing table
-
I'm running the latest 2.7.0 build. I added a specific static route plus gateway only to my second box from the webGUI (HA setup, but using a single IP so this way I have access to the second box through the first under normal operation) which did initially appear correctly but after a minute or so they GW and route both disappeared, probably after I modified some FW rule on the first pfSense machine which replicated to the second removing the static route and gateway from the GUI (but still present in the system routing table and functional). I haven't rebooted the second machine but I suspect that if I do I will lose the settings. In any case, I suppose this shouldn't happen as it should be possible to manipulate the backup pfSense rules and settings in an HA environment and viceversa without issues (and maybe the procedure should be done differently?). I am sure the rules can be as I've done it before, but the gateways and static routes apparently need to be manipulated from the primary only, but intuitively I wouldn't want that specific route active on the primary (only the secondary should route through the primary's IP from a specific external source IP). I'm probably missing something - I know this is a non standard setup but it should work (well it does, but the settings are no longer reflected in the webGUI).