Problem Captive Portal pfSense 2.7 with allowed ip addresses

TbW

I reinstalled pfsense 2.6 and configured ldap gsuite. Everything works perfectly. Also "allowed IP addresses" of the captive portal.

susobaco

Same problem:

Gertjan

@susobaco

As showed in the other thread I linked above, the "2.7.0" portal works just fine.

Some thoughts though :
if this gets involved :

@sanrzn said in Problem Captive Portal pfSense 2.7 with allowed ip addresses:

haproxy (0.63_1)
Others: DHCP, DNS (with forward to firewall) on domain controller

then the setup will need more attention.

I'm pretty sure that if the classic setup was used : pfSense is the DNS, and handles the DHCP, the portal works.
Now, step by step : remove DHCP, have it being handled by another DHCP server : and test (!) : it can be done. It's a question of the correct 'settings' and all devices/systems involved.
Next step : pfSense isn't handling the DNS anymore on the portal : that can be arranged also.
Another step "domain controller" : ok, why not. Things are getting way more complicated as even more things have to be checked. I never did this myself, but I presume it is possible.

wtasin

Hi,
I had the same problem.

I found out that switching the Webconfigurator back to english language helps.

pfSense expects to get as direction value either "both", "from" or "to".
![alt text](image url)

After switching back to english, you have to edit and save the wrongly saved "Allowed IP address" entries.

Even if I export the configuration (with the german translated WebConfigurator) I found the translated string as value in the config.xml.

HTH

TbW

@wtasin HI,

so using the English language, does it work?

wtasin

@TbW yes, the arrows are showing up and the bypass of the allowed ips also works

TbW

@wtasin OK thank you. I will try.

serginho

realmente funcionou fazendo da forma que você explicou, mas o controle de banda não funciona.

TbW

@wtasin yes, it actually works in English language.
@serginho bandwidth control does not work. Seems limited to 100 Mbit/s per user.

Gertjan

@TbW said in Problem Captive Portal pfSense 2.7 with allowed ip addresses:

Seems limited to 100 Mbit/s per user.

Do I need to show an example like this :

or like this :

Btw : I'm using 23.09, and I presume that 2.7.1 and 23.09 share the same kernel, kernel modules and and GUI.

TbW

@Gertjan If you allow navigation by entering the mac address, the device is set up to 100 Mbit/s DW/UP.