IPv6 Issues since upgrading

stephenw10

Like this:
Screenshot from 2023-08-01 23-30-57.png

gregeeh

@stephenw10 - Yep, here are the results.

PING google.com (142.250.66.238) from 192.168.10.1: 56 data bytes
64 bytes from 142.250.66.238: icmp_seq=0 ttl=121 time=6.247 ms
64 bytes from 142.250.66.238: icmp_seq=1 ttl=121 time=6.232 ms
64 bytes from 142.250.66.238: icmp_seq=2 ttl=121 time=6.627 ms

--- google.com ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 6.232/6.369/6.627/0.183 ms

So I need to find the issue with the LAN clients not being able to ping IPv6 addresses.

EDIT: And the IPv6:

PING6(56=40+8+8 bytes) 2402:7940:f021:2900:2e0:4cff:fe68:1bb3 --> 2404:6800:4006:810::200e
16 bytes from 2404:6800:4006:810::200e, icmp_seq=0 hlim=121 time=6.173 ms
16 bytes from 2404:6800:4006:810::200e, icmp_seq=1 hlim=121 time=6.171 ms
16 bytes from 2404:6800:4006:810::200e, icmp_seq=2 hlim=121 time=6.723 ms

--- google.com ping6 statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 6.171/6.356/6.723/0.260 ms

stephenw10

Ok so pings from the /56 delegated subnet work so upstream routing is fine. And pfSense knows that subnet is on the LAN. So as long as your have firewall rules to allow it clients should be able to ping out from an address in that subnet.

Check the firewall logs for blocked traffic.

Check the clients have a default v6 route via the pfSense LAN.

gregeeh

@stephenw10 said in IPv6 Issues since upgrading:

Check the firewall logs for blocked traffic.

Check the clients have a default v6 route via the pfSense LAN.

Thank you @stephenw10 for your assistance. I will do some checking.

Can you explain how the clients get a v6 route? I have DHCPv6 Server disabled as that is what my ISP told me.

Once again, I appreciate your time.

stephenw10

They should see it via router advertisements. If they are getting an IP in that subnet then SLAAC must be working so I'd expect them to get a gateway/route.

Not sure why your ISP told you to disable the dhcpv6 server though. You should be able to use both.

gregeeh

@stephenw10 said in IPv6 Issues since upgrading:

If they are getting an IP in that subnet then SLAAC must be working so I'd expect them to get a gateway/route.

This is a typical Windows PC that can't connect to v6 addresses.

Wireless LAN adapter WiFi:

   Connection-specific DNS Suffix  . : localdomain
   Description . . . . . . . . . . . : Qualcomm Atheros QCA61x4A Wireless Network Adapter
   Physical Address. . . . . . . . . : D8-C4-97-8B-1F-56
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::f2e3:d343:2681:34fe%9(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.10.182(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Wednesday, 2 August 2023 9:00:55 AM
   Lease Expires . . . . . . . . . . : Wednesday, 2 August 2023 11:00:49 AM
   Default Gateway . . . . . . . . . : fe80::2e0:4cff:fe68:1bb3%9
                                       192.168.10.1
   DHCP Server . . . . . . . . . . . : 192.168.10.1
   DHCPv6 IAID . . . . . . . . . . . : 114869399
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-23-DD-48-A7-D8-C4-97-8B-1F-56
   DNS Servers . . . . . . . . . . . : 192.168.10.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
   Connection-specific DNS Suffix Search List :

stephenw10

It doesn't have a routable IPv6 address from the /56 subnet so.... it can't work.

Did you also disable router advertisements on the LAN? That needs to be enabled.

gregeeh

@stephenw10 said in IPv6 Issues since upgrading:

Did you also disable router advertisements on the LAN? That needs to be enabled.

Is this what you mean?

alt text

stephenw10

Yes. Try enabling the dhcpv6 server again though.

gregeeh

@stephenw10 - That has done the trick, many thanks. I never thought about enabling the DHCPv6 Server as my ISP, and others I've seen, said to keep it disabled. Here's an extract from what my ISP says:

22. Go to Services, DHCPv6 Server & RA

23. Make sure on the first page (DHCPv6 server) the box is unticked – you do not want to enable the DHCPv6 server on the LAN.

24. Select the router advertisements tab on that page.

25. Change router mode to: Assisted – RA Flags [managed, other stateful], Prefix Flags...

26. Router priory set to Normal (it should already be preset to that – if not, change it to normal).

27. Leave everything else on that page blank.

poppadum

@poppadum said in IPv6 Issues since upgrading:

The gateway IPv6 address shown doesn't seem to be valid for interface pppoe0:

I'm not sure where it's getting that gateway address from - it's set to dynamic in the web interface.

After a bit more investigation I've discovered that the default gateway address pfSense is picking up is actually at my ISP's end and is correct.

My problem seems to be exactly the same as @jordanp123 has: pfSense is not adding a default ipv6 route:

[2.7.0-RELEASE][admin@pfSense]/root: route -6 get default
route: route has not been found

My ISP uses PPPoE so I can temporarily fix it with route -6 add default -interface pppoe0
But if my PPP connection drops it loses the default route again.

Looking at the output of /etc/rc.newwanipv6 when I rebooted pfSense I'm seeing a few Gateway, NONE AVAILABLE errors:

Aug  2 10:12:39 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 10:12:39 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 10:12:39 pfSense php-fpm[368]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through dynamic
Aug  2 10:12:39 pfSense check_reload_status[406]: rc.newwanipv6 starting pppoe0
Aug  2 10:12:40 pfSense php-fpm[86171]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 10:12:40 pfSense php-fpm[86171]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 10:12:40 pfSense php-fpm[86171]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through fe80::203:97ff:feba:900%pppoe0
Aug  2 10:12:41 pfSense php-fpm[86171]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.sock not found
Aug  2 10:12:41 pfSense php-fpm[86171]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_PPPOE~81.187.xxx.xxx~81.187.81.187.sock not found
Aug  2 10:12:41 pfSense php-fpm[86171]: /rc.newwanipv6: Gateway, none 'available' for inet, use the first one configured. 'WAN_PPPOE'
Aug  2 10:12:41 pfSense php-fpm[86171]: /rc.newwanipv6: Gateway, NONE AVAILABLE
Aug  2 10:12:41 pfSense php-fpm[368]: /rc.newwanipv6: The command '/usr/local/bin/dpinger -S -r 0 -i WAN_DHCP6 -B 2001:8b0:1111:1111:0:ffff:51bb:1aef -p /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.pid -u /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.sock -C "/etc/rc.gateway_alarm" -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 500 -L 20  2001:8b0:1111:1111:0:ffff:51bb:1aef >/dev/null' returned exit code '1', the output was ''
Aug  2 10:12:41 pfSense php-fpm[368]: /rc.newwanipv6: Error starting gateway monitor for WAN_DHCP6
Aug  2 10:12:42 pfSense php-fpm[368]: /rc.newwanipv6: Gateway, NONE AVAILABLE
Aug  2 10:12:42 pfSense php-fpm[368]: /rc.newwanipv6: Gateway, NONE AVAILABLE
Aug  2 10:12:43 pfSense php-fpm[86171]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 10:12:43 pfSense php-fpm[86171]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 10:12:43 pfSense php-fpm[86171]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through fe80::203:97ff:feba:900%pppoe0
Aug  2 10:12:45 pfSense php-fpm[86171]: /rc.newwanipv6: Gateway, NONE AVAILABLE
Aug  2 10:12:45 pfSense php-fpm[86171]: /rc.newwanipv6: Gateway, NONE AVAILABLE

Are these likely to be relevant?

poppadum

@stephenw10 said in IPv6 Issues since upgrading:

Try enabling the dhcpv6 server

That doesn't fix the problem for me unfortunately

stephenw10

Do you have the default v6 gateway set to WAN_DHCP6 in System > Routing?

poppadum

@stephenw10 said in IPv6 Issues since upgrading:

Do you have the default v6 gateway set to WAN_DHCP6 in System > Routing?

Both ipv4 & ipv6 gateways are set to automatic:

stephenw10

Set them both to the specific gateways and retest. See if you still see those gateway log entries.

Though since you only have one valid v4 and v6 gateway it should work in automatic.

poppadum

@stephenw10 said in IPv6 Issues since upgrading:

Set them both to the specific gateways and retest. See if you still see those gateway log entries.

Ah yes, initial testing suggests that explicitly setting the ipv6 gateway to WAN_DHCP6 makes a difference. I now have a default route in place and LAN clients can ping the ipv6 internet.

There are indeed fewer mentions of the Gateway, NONE AVAILABLE error in the logs:

Aug  2 17:46:39 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 17:46:39 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 17:46:39 pfSense php-fpm[368]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through dynamic
Aug  2 17:46:40 pfSense check_reload_status[406]: rc.newwanipv6 starting pppoe0
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through fe80::203:97ff:feba:900%pppoe0
Aug  2 17:46:41 pfSense php-fpm[368]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.sock not found
Aug  2 17:46:41 pfSense php-fpm[368]: /rc.newwanipv6: dpinger: No dpinger session running for gateway WAN_PPPOE
Aug  2 17:46:41 pfSense php-fpm[368]: /rc.newwanipv6: Gateway, none 'available' for inet, use the first one configured. 'WAN_PPPOE'
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_DHCP6~c91b75a6~2001:8b0:1111:1111:0:ffff:51bb:1aef.sock not found
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: dpinger: status socket /var/run/dpinger_WAN_PPPOE~81.187.xxx.xxx~81.187.81.187.sock not found
Aug  2 17:46:41 pfSense php-fpm[81388]: /rc.newwanipv6: Gateway, none 'available' for inet, use the first one configured. 'WAN_PPPOE'
Aug  2 17:46:42 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Aug  2 17:46:42 pfSense php-fpm[368]: /rc.newwanipv6: rc.newwanipv6: on (IP address: 2001:8b0:1111:1111:0:ffff:51bb:1aef) (interface: wan) (real interface: pppoe0).
Aug  2 17:46:42 pfSense php-fpm[368]: /rc.newwanipv6: Removing static route for monitor 2001:8b0:1111:1111:0:ffff:51bb:1aef and adding a new route through fe80::203:97ff:feba:900%pppoe0
Aug  2 17:46:44 pfSense php-fpm[368]: /rc.newwanipv6: Gateway, NONE AVAILABLE

@stephenw10 said in IPv6 Issues since upgrading:

Though since you only have one valid v4 and v6 gateway it should work in automatic.

Yes, both gateways set to automatic was working in v.2.6

stephenw10

Yes, something has changed there. Unclear what though. Still digging.