Install fail

imWACCo

cib3: <PCI-PCI bridge> at device 8.8 on pc12
cib3: failed to allocate initial 1/0 port window: 0xc888-8xdfff ci3: <PCI bus> on pcib3
cib4: <PCI-PCI bridge> at device 8.8 on pc13
cib4: failed to allocate initial 1/0 port window: 8xd888-8xdfff ci4: <PCI bus> on pcib4
atal trap 9: general protection fault while in kernel mode
puid= 8; apic id = 88 nstruction pointer =8x28:0xffffffff88d4e1f4
tack pointer =8x28:0xffffffff83e4be78
rane pointer ode segment = 8x28:0xffffffff83e4be78
                                        = base 8x8, limit Bxfffff, type 8x1b
rocessor eflags = DPL 8, pres 1, long 1, def32 8, gran 1 = interrupt enabled, resume, IOPL = 8
urrent process = 8 (suapper)
di: 6c28656369766564 rsi: fffff888857ad898 rdx:
CX:
8 r8:
18fff r9:
1888
ax: fffff888859f8448 rbx: 6c28656369766564 rbp: ffffffff83e4be78
18: fff rii:
13: fffff888857ad898 r14: =9
4 r15:
18fff
rap number
anic: general protection fault
puid=8
ine = 1
DB: enter: panic thread pid 8 tid 188888 1
topped at kdb_enter+8x32: movq b>
efff r12: fffff88885814689
$8.8x2347ce3(Xrip)

I don't know how to upload the pic for my phone cam. For some reason it's cutting off the first letter on the screen. Google lens did a bad job of reading this

Anyone have ideas as to why it halts?

rcoleman-netgate

@imWACCo What is the hardware, exactly?

stephenw10

Yeah more info needed. But it looks like it could be a BIOS issue if it's passing incorrect resource values for the PCI bridges like that. Make sure it's running the current version.

imWACCo

Compaq Presario CQ5600Y

Because of it only having a 1xPCI, the intel NIC is in the video slot. In BIOS, video is set to onboard.

pfSense-CE-memstick-2.7.0-RELEASE-amd64 Latest as far as I know

rcoleman-netgate

@imWACCo said in Install fail:

Compaq Presario CQ5600Y

Which version of pfSense CE?

imWACCo

pfSense-CE-memstick-2.7.0-RELEASE-amd64 Latest as far as I know

stephenw10

Does it fail identically every boot?

You might try the previous release to see if it doesn't trigger it: https://atxfiles.netgate.com/mirror/downloads/pfSense-CE-memstick-2.6.0-RELEASE-amd64.img.gz

imWACCo

@stephenw10 said in Install fail:

Does it fail identically every boot?

The 3 times I've tried it

stephenw10

It's running the current BIOS version?

Try the 2.6 image. Try disabling as much as you can in the BIOS. Anything unrequired, soundcards, parallel port, firewire etc.

Those nvidia chipsets can behave oddly though.

imWACCo

@stephenw10 said in Install fail:

It's running the current BIOS version?

I don't know, HP only shows me "CQ3100" and no downloads for that other model

Also, it has 2+4=6gb RAM, from what I see, it will only take 4gb.

I got it yesterday for $40, with keyboard, monitor, and mouse

stephenw10

Try with only one stick of RAM then. Make it as basic as possible.

imWACCo

@stephenw10 said in Install fail:

Try with only one stick of RAM then. Make it as basic as possible.

Yes, lots of testing to do. Not even had it 24h yet. Getting old SUX, I'll get to it, but I was hoping something set off alarm bell to cut down on testing

stephenw10

Getting old does indeed suck.

We'd need to see more of the crash to know more there. Just the panic string is too generic to tell us much.