PFsense travando

Guilherme 2

Olá, pessoal! O meu Pfsense que está na versão 2.7.0-RELEASE (amd64) esta apresentando travamento esquisito e só volta quando desligo completamente o equipamento e ligo novamente, o problema começou a ocorrer após a atualização para esta nova versão.
Segue o Log gerado pelo sistema.

ahcich0: Timeout on slot 17 port 0
Aug 22 00:01:37 kernel ahcich0: is 00000000 cs 00020000 ss 00000000 rs 00020000 tfd c0 serr 00000000 cmd 0004d117
Aug 22 00:01:37 kernel (ada0:ahcich0:0:0:0): WRITE_DMA48. ACB: 35 00 e8 5d d2 40 61 00 00 00 f8 00
Aug 22 00:01:37 kernel (ada0:ahcich0:0:0:0): CAM status: Command timeout
Aug 22 00:01:37 kernel (ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
Aug 22 00:03:07 kernel ahcich0: Timeout on slot 25 port 0
Aug 22 00:03:07 kernel ahcich0: is 00000000 cs f0000007 ss fe000007 rs fe000007 tfd c0 serr 00000000 cmd 0004dc17
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 f8 e8 5e d2 40 61 00 00 00 00 00
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): CAM status: Command timeout
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
Aug 22 00:03:07 kernel ahcich0: Timeout on slot 25 port 0
Aug 22 00:03:07 kernel ahcich0: is 00000000 cs 02000000 ss 00000000 rs 02000000 tfd c0 serr 00000000 cmd 0004d917
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): WRITE_DMA48. ACB: 35 00 e8 64 d2 40 61 00 00 00 08 00
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): CAM status: Command timeout
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain
Aug 22 00:03:07 kernel ahcich0: Timeout on slot 1 port 0
Aug 22 00:03:07 kernel ahcich0: is 00000000 cs 00000000 ss 00000002 rs 00000002 tfd 40 serr 00000000 cmd 0004c117
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): WRITE_FPDMA_QUEUED. ACB: 61 08 e8 65 d2 40 61 00 00 00 00 00
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): CAM status: Command timeout
Aug 22 00:03:07 kernel (ada0:ahcich0:0:0:0): Retrying command, 3 more tries remain

ismarcs

@Guilherme-2 said in PFsense travando:

ahcich0

HD, cabos.
vc usa quantos HDS/SSD ?

Maciel

Olá.
Troca a placa de rede e veja se resolve.

Hermanni Lima

Bom dia!
Sobre esse problema de travamento, conseguiu resolver? Se sim, como? Também está com o mesmo problema, o pfsense trava e só vai reiniciando no botão direto do servidor.

ismarcs

@Hermanni-Lima Olá, oque tem o LOG ?

Hermanni Lima

@ismarcs bom dia!
Abaixo o que mostra no log, não aparece muitos.![alt text](![image url](image url))

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 635 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 635 occurred at disk power-on lifetime: 41760 hours (1740 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH

40 51 79 af ae 00 e0 Error: UNC 121 sectors at LBA = 0x0000aeaf = 44719