CARP/HA in XCP-ng losses packets when in different hypervisor
-
Hi,
i have a setup of Pfsense Firewalls in HA that works perfectly fine when both FWs are in the same hypervisor, however when i migrate one of the FW Virtual Machines to a different hypervisor starts lossing a lot of packetsmy configuration is the following:
There is a public IP associated to the CARP WAN interface
xn0- WAN:
CARP:172.16.0.1/24
Primary:172.16.0.2/24
Secondary:172.16.0.3/24xn1- LAN:
CARP: 172.16.100.1/24
Primary:172.16.100.2/24
Secondary:172.16.100.3/24xn2- MGMT:
CARP: 172.16.116.1/24
Primary: 172.16.116.2/24
Secondary: 172.16.116.3/24xn3- SYNC:
Primary: 192.168.0.1/24
Secondary: 192.168.0.2/24My question: Does anyone knows why i would start lossing packets?
I haver already try the following:
Install Xen-Server tools on the Pfsense VM (source: https://tweenpath.net/running-pfsense-xenserver-xenguest/) -
When you say "migrate to a different hypervisor" do you mean a different host running the same hypervisor software or do you mean an entirely different hypervisor (like VMWare or something)?
-
@planedrop said in CARP/HA in XCP-ng losses packets when in different hypervisor:
rvisor (like
Yes, we have a machine with 4 hypervisors. when we move one VM in changes the entire supervisor.
Each hipervisor is connected to a switch in the same manner and configuration -
@Luis-Cordero But are these all XCP-ng or do you have like Proxmox, Hyper-V, VMWare, and XCP-ng? Moving VMs between different hypervisors is usually not an easy task.
Moving them between different hosts of the same hypervisor platform though is a different story.
Either way it sounds like one of the CARP interfaces isn't properly syncing, maybe they can't reach each other once moved to the other host.
-
@planedrop said in CARP/HA in XCP-ng losses packets when in different hypervisor:
cing, maybe they can't
By any chance do you know any know issue for why is there a communication error when host are in differents hypervisors

in the picture it shows when both primary and secondary firewalls are in the same hypervisor everything is ok, but when i change from a to b starts lossing packets
-
@Luis-Cordero OK so looks like both hosts are running XCP-ng.
There are a lot of things that could cause this behavior, are the two hosts in a pool together or 2 separate pools? Either way they are probably communicating over a switch, maybe that physical switch doesn't have the right VLANs in place?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy