Transfert crashing when going through internal GW
-
Hi,
I have multiple GW for OpenVPN needs.
So my GW for internet needs is the OpenVPN interface for the internet traffic to be in PureVPN tunnel.
For internal networks I use a second GW to bring back the traffic to the LAN with FW Rules.
Rules identified are used to redirect traffic from specific VLAN 150 (192.168.150.0/24) through a tunnel for the Internet and internal GW for LAN requests
The Rules are working OK the routing seems OK for sustain requests, but it fails after a few seconds.
Then wait for a couple of seconds and restart transfer until finished.
Microsoft transfer can deal with resets but If I'm playing or recording a video as soon as it resets it crashes.
Does anyone have an idea why I got these resets?
Thanks
-
@Starlord_006
From where to where do you copy here?What is your LAN subnet?
What is the Inside_GW?
What is behind the aliases in use? -
Copy from LAN to LAN but a hop through PfSense to redirect Internet traffic through the VPN tunnel and skip all LAN traffic to Inside_LAN gateway
All the traffic through the VPN gateway is constant but the traffic hopping to inside is unstable.
PC source IP is 192.168.150.51
PC source GW 192.168.150.253 (PfSense)
PC destination IP is 192.168.210.20
PC destination GW 192.168.210.254 (VLAN 210 routing switch)Inside_GW for Inside_LAN requests IP 192.168.150.254 (VLAN 150 routing switch)
Internet Gateway for VPN Tunel (PUREVPN_VPNV4) is IP Provided By PureVPN on connectionSecured_LAN is 192.168.150.0/24 (Internet VPN tunneled)
Got multiple VLANs in Inside_LAN
VLAN 1 -- 192.168.101.0/24
VLAN 110 -- 192.168.110.0/24
VLAN 130 -- 192.168.130.0/24
VLAN 140 -- 192.168.140.0/24
VLAN 210 -- 192.168.210.0/24Thanks
-
@Starlord_006 so your using your lan as your transit to a downstream router.. Well that is going to be asymmetrical and yeah not going to work..
You need to setup a transit network.
Here is how to proper setup a downstream router
