Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Placa de rede para de funcionar

    Scheduled Pinned Locked Moved
    Hardware
    4
    25
    1.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      fcostars @stephenw10
      last edited by

      @stephenw10
      Sep 26 11:46:52 php-fpm 48006 /rc.filter_configure_sync: GW States: One or more gateways is down, flushing all states: ALGAR_PPPOE
      Sep 26 11:46:54 ppp 77741 [opt2_link0] PPPoE connection timeout after 9 seconds
      Sep 26 11:46:54 ppp 77741 [opt2_link0] Link: DOWN event
      Sep 26 11:46:54 ppp 77741 [opt2_link0] LCP: Down event
      Sep 26 11:46:54 ppp 77741 [opt2_link0] Link: reconnection attempt 1 in 2 seconds
      Sep 26 11:46:55 check_reload_status 413 Linkup starting re1
      Sep 26 11:46:55 kernel re1: watchdog timeout
      Sep 26 11:46:55 kernel re1: link state changed to DOWN
      Sep 26 11:46:56 ppp 77741 [opt2_link0] Link: reconnection attempt 1
      Sep 26 11:46:56 ppp 77741 [opt2_link0] PPPoE: Connecting to ''
      Sep 26 11:46:56 ppp 77741 caught fatal signal TERM
      Sep 26 11:46:56 ppp 77741 [opt2] IFACE: Close event
      Sep 26 11:46:56 ppp 77741 [opt2] IPCP: Close event
      Sep 26 11:46:58 ppp 77741 [opt2] Bundle: Shutdown
      Sep 26 11:46:58 ppp 77741 [opt2_link0] Link: Shutdown
      Sep 26 11:46:58 kernel re1: link state changed to UP
      Sep 26 11:46:58 check_reload_status 413 Linkup starting re1
      Sep 26 11:46:58 ppp 77741 process 77741 terminated
      Sep 26 11:46:58 check_reload_status 413 Reloading filter
      Sep 26 11:46:59 ppp 94109 Multi-link PPP daemon for FreeBSD
      Sep 26 11:46:59 ppp 94109 process 94109 started, version 5.9
      Sep 26 11:46:59 ppp 94109 web: web is not running
      Sep 26 11:46:59 ppp 94109 [opt2] Bundle: Interface ng0 created
      Sep 26 11:46:59 ppp 94109 [opt2_link0] Link: OPEN event
      Sep 26 11:46:59 kernel ng0: changing name to 'pppoe1'
      Sep 26 11:46:59 ppp 94109 [opt2_link0] LCP: Open event
      Sep 26 11:46:59 ppp 94109 [opt2_link0] LCP: state change Initial --> Starting
      Sep 26 11:46:59 ppp 94109 [opt2_link0] LCP: LayerStart
      Sep 26 11:46:59 ppp 94109 [opt2_link0] PPPoE: Connecting to ''
      Sep 26 11:47:00 sshguard 45311 Exiting on signal.

      stephenw10S 1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator @fcostars
        last edited by stephenw10

        @fcostars said in Placa de rede para de funcionar:

        Sep 26 11:46:55 kernel re1: watchdog timeout
        Sep 26 11:46:55 kernel re1: link state changed to DOWN

        Ok you actually have a Realtek NIC and its hitting timeout events. Since that's re1 you must have at least two Realtek NICs.

        What interface is re1 being used for? Is that the WAN?

        Is that really an HP NC364T? Real NC364Ts use Intel 82571EB chips.

        F 1 Reply Last reply Reply Quote 0
        • F
          fcostars @stephenw10
          last edited by

          @stephenw10
          Sorry, is SE-LGI8111-4bt on this server.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            @fcostars said in Placa de rede para de funcionar:

            SE-LGI8111-4bt

            Ok so the problem there is the Realtek NIC. It's better to avoid them when you can.

            The only thing you can try there, other than replacing it, is to use the alternative realtek-kmod-driver:
            At the command line run:
            pkg install realtek-re-kmod
            Then run:

            echo 'if_re_load="YES"' >> /boot/loader.conf.local
echo 'if_re_name="/boot/modules/if_re.ko"' >> /boot/loader.conf.local

            Then reboot and check the boot logs show the newer driver:

            re0: <Realtek PCIe GbE Family Controller> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1
re0: Using Memory Mapping!
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: version:1.97.00
re0: Ethernet address: 00:0d:b9:38:30:10

            steve

            F 3 Replies Last reply Reply Quote 1
            • F
              fcostars @stephenw10
              last edited by

              @stephenw10
              ok, I did as you instructed me!
              this was the result

              re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7b00000-0xf7b00fff,0xf0300000-0xf0303fff irq 17 at device 0.0 on pci4
              re0: Using 1 MSI-X message
              re0: Chip rev. 0x2c800000
              re0: MAC rev. 0x00100000
              miibus0: <MII bus> on re0
              rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
              rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
              re0: Using defaults for TSO: 65518/35/2048
              re0: Ethernet address: 00:e0:4c:68:20:25
              re0: netmap queues/slots: TX 1/256, RX 1/256

              Thank you very much!

              Now I'll wait if there will be any problems.

              1 Reply Last reply Reply Quote 0
              • F
                fcostars @stephenw10
                last edited by

                This post is deleted!
                1 Reply Last reply Reply Quote 0
                • PotapuchP
                  Potapuch
                  last edited by

                  This post is deleted!
                  1 Reply Last reply Reply Quote 0
                  • F
                    fcostars @stephenw10
                    last edited by

                    @stephenw10

                    Now it worked!

                    I added the lines in the conf.local file.
                    if_re_load="YES" >> /boot/loader.conf.local
                    if_re_name="/boot/modules/if_re.ko" >> /boot/loader.conf.local

                    re0: <Realtek PCIe GbE Family Controller> port 0xe000-0xe0ff mem 0xf7b00000-0xf7b00fff,0xf0300000-0xf0303fff irq 17 at device 0.0 on pci4
                    re0: Using Memory Mapping!
                    re0: Using 1 MSI-X message
                    re0: version:1.98.00
                    re0: Ethernet address: 00:e0:4c:68:20:25

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      Nice. Yes you need to see the 'version:' logged to know it has loaded.

                      See if that stops the timeouts.

                      Steve

                      F 2 Replies Last reply Reply Quote 1
                      • F
                        fcostars @stephenw10
                        last edited by

                        @stephenw10
                        Thank you very much!

                        1 Reply Last reply Reply Quote 1
                        • F
                          fcostars @stephenw10
                          last edited by

                          @stephenw10
                          One last question.
                          Which network card do you recommend buying?

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Something Intel based. Hence I didn't expect that HP card you referred to to be an issue. Any i350 NIC will be good. There are a lot of fake Intel NICs around though so be careful.

                            F 1 Reply Last reply Reply Quote 0
                            • F
                              fcostars @stephenw10
                              last edited by

                              @stephenw10 Thank you!

                              1 Reply Last reply Reply Quote 0
                              • S
                                sTicKs23
                                last edited by sTicKs23

                                I had the same problem with a Realtek onboard LAN for many years.
                                64abf2b3-8aa9-4e3a-99e3-e705f72f8f73-image.png
                                What actually worked for me, was to clone https://github.com/alexdupre/rtl_bsd_drv to a FreeBSD 14 instance (branch v1.98) and, compile the driver with make, backup the old if_re.ko from /boot/kernel, and copy the compiled driver over to /boot/kernel.
                                c63e9fad-3952-46cf-bf20-4119ae81d448-image.png

                                Already compiled driver if anyone is looking for it (zip pass 123): https://1drv.ms/u/s!AteTpjotrz-qiuMVNwFrD6CY72xSpg?e=Ftc6ui

                                3b3a758b-5e98-4711-aed1-ce89b9bf3696-image.png

                                1 Reply Last reply Reply Quote 1
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  That's the same driver that is built in the kmod: https://github.com/pfsense/FreeBSD-ports/blob/devel/net/realtek-re-kmod/Makefile#L11
                                  In general it's better to use the one from our repo since it's built against our kernel.

                                  But compiling your own driver is good practice. 😉

                                  Steve

                                  S 1 Reply Last reply Reply Quote 1
                                  • S
                                    sTicKs23 @stephenw10
                                    last edited by

                                    Hell @stephenw10,
                                    Thank you for your response.

                                    In my case, I'm running a custom kernel, because pfSense 2.7.0 is not shipping all the kernel modules like 2.6.0 did (please check https://forum.netgate.com/topic/183148/missing-kernel-modules-on-release-2-7-0).

                                    At some point I tried using 'realtek-re-kmod-198.00_3.pkg' but I was getting some kernel panics and driver compilation was the only way I got over this.

                                    Thanks!

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      Hmm, not sure where you got that from then but it wasn't our repo:

                                      [2.7.0-RELEASE][admin@pfsense.fire.box]/root: pkg search realtek
realtek-re-kmod-198.00_1       Kernel driver for Realtek PCIe Ethernet Controllers
                                      1 Reply Last reply Reply Quote 1
                                      • First post
                                        Last post