Disk resize
-
Hello,
I use pfSense 2.7.0, on a VM in the cloud, with one virtual disk.
The installation process needed a "side" install storage, which I took from the one virtual disk I have, so I split the disk to two disks.
Now that the installation is over successfully, I deleted the install disk and I am left with pfSense disk that is not using all of the disk storage that I got from the cloud provider.
So, my question is if there is any special process how to resize the pfSense disk? or should I find any guide on the Internet how to resize a freebsd disk and follow it?
Thanks.
-
If you run at the command line:
touch /root/force_growfsand then reboot it should fill the drive.However I strongly recommend snapshotting the VM first if you can. I've used that command many times without issue but it's usually only ever run at first boot after installing.
Steve
-
@stephenw10 Thank you.
Your idea did the trick!
But possibly only for part of the way...The total disk size I get from the cloud provider is 25 GB.
Internally it was 16 GB and after the above procedure - it is now 21 GB.
Is it possible that pfSense save the missing 4 GB for some internal use of its own? -
It may be that's the formatted size. It might be using some of the rest of that for SWAP.
Try running:
geom part list -
OK, these are the main attributes of the reply for the command you offered:
"
providers:Mediasize: 524288 (512K)
type: freebsd-bootMediasize: 1073741824 (1.0G)
type: freebsd-swapMediasize: 25768734720 (24G)
type: freebsd-zfsConsumers:
Mediasize: 26843545600 (25G)
"Then I ran df -h and got this:
"
Filesystem Size Used Avail Capacity Mounted on
pfSense/ROOT/default 21G 626M 20G 3% /
devfs 1.0K 1.0K 0B 100% /dev
pfSense/tmp 20G 176K 20G 0% /tmp
pfSense/var 20G 3.3M 20G 0% /var
pfSense 20G 96K 20G 0% /pfSense
pfSense/home 20G 96K 20G 0% /home
pfSense/var/db 20G 1.1M 20G 0% /var/db
pfSense/var/log 20G 1.3M 20G 0% /var/log
pfSense/var/empty 20G 96K 20G 0% /var/empty
pfSense/var/cache 20G 12M 20G 0% /var/cache
pfSense/reservation 22G 96K 22G 0% /pfSense/reservation
pfSense/var/tmp 20G 104K 20G 0% /var/tmp
pfSense/ROOT/default/cf 20G 516K 20G 0% /cf
pfSense/ROOT/default/var_db_pkg 20G 2.9M 20G 0% /var/db/pkg
tmpfs 4.0M 108K 3.9M 3% /var/run
devfs 1.0K 1.0K 0B 100% /var/dhcpd/dev
" -
Also ran
egrep 'da[0-9]|cd[0-9]' /var/run/dmesg.bootwhich gave:
"
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0
acpi_syscontainer3: <System Container> port 0xcc0-0xcd7 on acpi0
da0 at vtscsi0 bus 0 scbus0 target 0 lun 0
da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 25600MB (52428800 512 byte sectors)
GEOM: da0: the secondary GPT header is not in the last LBA.
" -
That doesn't look unreasonable. Have you taken any ZFS snapshots? Those will use space and not appear there.
-
Hi @stephenw10 ,
I checked that, no snapshots were made.
4 out of 25 is 16%, 16% overhead doesn't sound to me reasonable for disk management/operations.
But I am not a storage expert, I am writing from what I know as non-expert.I also searched an found lower percentage numbers, like 4%, at https://wintelguy.com/2017/zfs-storage-overhead.html
-
Potentially the partition layout could have prevented growfs using that space. Note the pfSense/reservation mount point shows 22G.
Do you actually need any more space? -
@stephenw10
I will be able to live with the missing space, I only like things to be tidy and efficient and it looks like a kind of storage glitch and waste here. I hope someone at Netgate will have a look into this.Anyway, thank you for discussing this with me, I will not waste your time anymore on this.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy