NG-1100 failed update
-
Hi All,
I have a bunch of PFSense+ boxes (NG-6100 & NG-1100).
I succeeded updating most of them. One NG-1100 however never completed the update and is not booting anymore. Do I have to return it for warranty or can I easily do something to fix this.
On the console I see this:
.....
ERROR: cannot open /boot/lua/loader.lua: no such file or directory.
Type '?' for a list of commands, 'help' for more detailed help.
OKMaybe someone can help here
p.s. maybe relevant, the full log from power-up:
TIM-1.0
WTMI-devel-18.12.1-1a13f2f
WTMI: system early-init
SVC REV: 5, CPU VDD voltage: 1.260V
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2)
NOTICE: BL1: Built : 10:16:46, Oct 13 2021
NOTICE: BL1: Booting BL2
NOTICE: BL2: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2)
NOTICE: BL2: Built : 10:16:50, Oct 13 2021
NOTICE: BL1: Booting BL31
NOTICE: BL31: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2)
NOTICE: BL31: Built : 10U-Boot 2018.03-devel-18.12.3-gc9aa92c-dirty (Oct 13 2021 - 10:14:54 -0300)
Model: Netgate 1100
CPU 1200 [MHz]
L2 800 [MHz]
TClock 200 [MHz]
DDR 750 [MHz]
DRAM: 1 GiB
Comphy chip #0:
Comphy-0: USB3 5 Gbps
Comphy-1: PEX0 2.5 Gbps
Comphy-2: SATA0 6 Gbps
SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: ncq led only pmp fbss pio slum part sxs
PCIE-0: Link down
console comconsole failed to initialize
Consoles: EFI console m SPI Flash... SF: Detected mx25u3235f with page size 25 Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p2:
FreeBSD/arm64 EFI loader, Revision 1.1
(Fri Feb 10 20:26:39 UTC 2023 root@freebsd)
Hit any key to stop autoboot: 0
Command line arguments: loader.efit!
Image base: 0x7000000netgate-1100.dtb
EFI version: 2.70720-sg1100.dtb
EFI Firmware: Das U-Boot (rev 0.00)tb
Console: efi,comconsole (0).dtb
Load Path: /\armada-3720-sg1100.dtb
Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD2,0x01,0,0x82001,0x20000)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,001,0,0x82001,0x20000) ms (1.9 MiB/s)
Setting currdev to disk0p2: at 07000000 ...
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(1,0x01,,0x1,0x82000) sdhci@d0000.blk...
Setting currdev to disk0p1:ady
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(3,0x01,,0xa2001,0xdeee7f)
Setting currdev to zfs:pfSense/ROOT/default:
ERROR: cannot open /boot/lua/loader.lua: no such file or directory.Type '?' for a list of commands, 'help' for more detailed help.
OK -
It can't find the loader file. If you have a backup config the fastest way to get back up from that is to re-install the firmware clean and restore.
Open a ticket to get the recovery image: https://www.netgate.com/tac-support-request -
S stephenw10 moved this topic from General pfSense Questions on
-
This post is deleted!
