Dual Wan Load balance issue.
-
Hi,
Question. Hopefully someone can help me out with this issue.
When i set up dual wan ( balancer ) tier 1 + tier 1.
My admin comptuer cant talk with devices on the other lans/vlans, only the lans/vlans gateways.
So if i pinging the gateways to every lans/vlans that works fine, but when i try to ping/connect to the devices its not working.
So to make it work i have to change the gateway from balancer to default or make a rule over the balancer rule with default gateway to ping/connect to the devices.
if i choose wan 1 or wan 2 on gateway i get the same issue as i do with balancer so the only thing that works if i want to talk to my Lans/Vlans is to use default gateway,
so every time i want to make a change on my servers or anything else on the nettwork I have to go in and change the rules to " gateway: default " and put the rule back afterwards to balancer.Does anyone know what I have to do to be able to get " wan1, wan2 or balancer " to talk with the other lans/vlans network?
Thanks in advance.
-
In the explanation above, I wrote gateway, but meant the static ipv4 for the lan/vlan that I can ping. new to pfsense and network, so I'm a bit confused here. anyway updated explanation below
When i set up dual wan ( balancer ) tier 1 + tier 1.
My admin computer cant talk with devices on the other lans/vlans, only the lans/vlans static ipv4 for the lan network.
If i ping the static ipv4 ip for lans/vlans that works fine, but when i try to ping/connect to other ip`s/devices on the network its not pinging/connecting at all.
So to make it work i have to change the gateway from (dual wan / balancer) to default gateway or make a rule over the balancer rule with default gateway to ping/connect to the devices.When i run Packet Capture with dual wan ( balancer )
and ping static ipv4 for another lan port or vlan network ICMP echo request get reply asap no problems
but when try the exact same thing on a device on the vlan nettwork it does not get reply at all, just timing out and 100% loss.If i change dual wan ( balancer ) to default gateway
Then every request gets replyed asap and everything works fine.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy