carp adress not avaible from lan/wan1/wan2
public and local addresses of the carp are set, the status is primary master, secondary backup.
But the carp VIP address is not available from clients, the firewall rules allow everything on all lan/sync interfaces.
interfaces on both hosts are the same according to opt/s
what could be the problem?
How to understand that the carp is working normally?
one gateway is virtual hyper v, the second is physical
no synchronization errors, no errors
I think the problem is common, all interface there is a pool of 3 addresses....
@mic-bummer Can you explain your last comment?
Router1 should have .1 and .2
Router2 should have .1 and .3
I would start with one WAN and add the second later.
I mean that the gateways to wan and lan have different addresses and address of the carp.
wan public internet address with same logic
on the lan interface everything is allowed, but clients do not have access to 10.10.122.5
ping and outgoing nat do not work by default, although the gateways see and ping each other
@mic-bummer Switch problem? Is it a managed switch or a dumb switch? (Try the latter)
@SteveITS the carp began to work after entering the second gateway in first High Availability option