SG-1100 will not start

ladae

Hi,
I have just upgraded pfblockerng to newest version, restarted 1100 and it will not start. When I connect via USB I can see:

TIM-1.0
WTMI-devel-18.12.1-1a13f2f
WTMI: system early-init
SVC REV: 5, CPU VDD voltage: 1.225V
NOTICE:  Booting Trusted Firmware
NOTICE:  BL1: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2)
NOTICE:  BL1: Built : 10:16:46, Oct 13 2021
NOTICE:  BL1: Booting BL2
NOTICE:  BL2: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2)
NOTICE:  BL2: Built : 10:16:50, Oct 13 2021
NOTICE:  BL1: Booting BL31
NOTICE:  BL31: v1.5(release):1f8ca7e-dirty (Marvell-devel-18.12.2)
NOTICE:  BL31: Built : 10

U-Boot 2018.03-devel-18.12.3-gc9aa92c-dirty (Oct 13 2021 - 10:14:54 -0300)

Model: Netgate 1100
       CPU     1200 [MHz]
       L2      800 [MHz]
       TClock  200 [MHz]
       DDR     750 [MHz]
DRAM:  1 GiB
Comphy chip #0:
Comphy-0: USB3          5 Gbps
Comphy-1: PEX0          2.5 Gbps
Comphy-2: SATA0         6 Gbps
SATA link 0 timeout.
AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
flags: ncq led only pmp fbss pio slum part sxs
PCIE-0: Link down
console comconsole failed to initialize
Consoles: EFI console  m SPI Flash... SF: Detected mx25u3235f with page size 256    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p2:
FreeBSD/arm64 EFI loader, Revision 1.1
(Fri Feb 10 20:26:39 UTC 2023 root@freebsd)
Hit any key to stop autoboot:  0
   Command line arguments: loader.efit!
   Image base: 0x7000000netgate-1100.dtb
   EFI version: 2.70720-sg1100.dtb
   EFI Firmware: Das U-Boot (rev 0.00)tb
   Console: efi,comconsole (0).dtb
   Load Path: /\armada-3720-sg1100.dtb
   Load Device: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,0x01,0,0x64001,0x1117c)
Trying ESP: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(2,0x01,0,0x64001,0x1117c) ms (1.9 MiB/s)
Setting currdev to disk0p2: at 07000000 ...
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(1,0x01,0,0x1,0x64000) sdhci@d0000.blk...
Setting currdev to disk0p1:ady
Trying: /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/eMMC(1)/eMMC(0)/HD(3,0x01,0,0x7517d,0xe1bd03)
Setting currdev to zfs:pfSense/ROOT/default:
ERROR: cannot open /boot/lua/loader.lua: no such file or directory.

any help, please?

stephenw10

The fastest way back from there is to reinstall 23.09 clean. Open a ticket to get the recovery image:
https://www.netgate.com/tac-support-request

Steve