Unable to upgrade from 2.7.1 to 2.7.2 | Unmounting /boot/efi... done. | failed.

beatvjiking

@jimp access to the efi partition seems blocked.

[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/root: sysctl machdep.bootmethod
machdep.bootmethod: UEFI
[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/root: mount /boot/efi
mount: /boot/efi: unknown special file or file system
[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/root:

jimp

@beatvjiking said in Unable to upgrade from 2.7.1 to 2.7.2 | Unmounting /boot/efi... done. | failed.:

@jimp access to the efi partition seems blocked.

[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/root: sysctl machdep.bootmethod
machdep.bootmethod: UEFI
[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/root: mount /boot/efi
mount: /boot/efi: unknown special file or file system
[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/root:

Do you have either /dev/msdosfs/EFISYS or /dev/gpt/EFISYS? If so, try this instead:

# mount_msdosfs /dev/msdosfs/EFISYS /boot/efi

Or

# mount_msdosfs /dev/gpt/EFISYS /boot/efi

Followed by the df -hi /boot/efi/efi/boot/ command.

beatvjiking

@jimp that seems to have done the trick:

[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/dev: mount_msdosfs /dev/msdosfs/EFISYS /boot/efi
[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/dev: df -hi /boot/efi/efi/boot/
Filesystem             Size    Used   Avail Capacity iused ifree %iused  Mounted on
/dev/msdosfs/EFISYS    780K    387K    393K    50%       3   509    1%   /boot/efi
[2.7.0-RELEASE][admin@pvd-dhall-1.cic.com]/dev:

seems a bit... cramped?

alethewizard

@jimp

Filesystem Size Used Avail Capacity iused ifree %iused Mounted on
/dev/msdosfs/EFISYS 779K 386K 393K 50% 3 509 1% /boot/efi

jimp

Yeah, those must be rather old installations to have an EFI partition that small. I thought we made them significantly larger several years ago.

There probably isn't going to be a safe way to upgrade those in-place given the space constraint there. You're better off reinstalling.

But with the config recovery in the installer that should only take a few minutes to do in most cases.

alethewizard

@jimp

Thank you.

My EFI partition is 200M.

Could I resize the /dev/msdosfs/EFISYS to be more than 800K?

jimp

@alethewizard said in Unable to upgrade from 2.7.1 to 2.7.2 | Unmounting /boot/efi... done. | failed.:

@jimp

Thank you.

My EFI partition is 200M.

Could I resize the /dev/msdosfs/EFISYS to be more than 800K?

We looked into doing that in an automated manner at one time, but deemed it too dangerous. While technically possible you'd spend more time doing that and possibly messing it up than you would just reinstalling and recovering the configuration.

Once upon a time the FreeBSD EFI update method involved writing out a FAT filesystem image onto the partition rather than mounting and copying files, and that image was very small since it didn't need to be much larger than the loader itself. That was ... less than ideal for a number of reasons. But it's hard to break out of that in a safe manner.

beatvjiking

@jimp this install is from last year - I'd done a fresh install of 2.6 onto it to get ZFS in place. I have other machines on identical hardware and circumstances that aren't seeing the issue - is there some kind of weird corner case I hit? Maybe a workaround? The reinstalls are easy to do only if one can get to the machines.

alethewizard

@jimp

Thank you jimp!

Simply extraordinary! :)

You're right: with the config recovery in the installer in 3 minutes I have the VM again with new version 2.7.2.

Thank you very much!

jimp

WARNING: These commands may cause unintended harm to your installation, your state of being, aura, personal wellness, sanity, favorite sports team, and/or pets. Use with caution. Have backups and installation media nearby.

If it's a VM, snapshot it before proceeding.

Assuming your EFI partition is /dev/msdosfs/EFISYS, this should work. If it's not, substitute in the proper path (e.g. /dev/gpt/EFISYS or maybe /dev/vtbd0p1 for example.)

# mkdir -p /boot/efi
# mount_msdosfs /dev/msdosfs/EFISYS /boot/efi
# mkdir -p /tmp/efitmp
# cp -Rp /boot/efi/* /tmp/efitmp
# umount /boot/efi
# newfs_msdos -F 32 -c 1 -L EFISYS /dev/msdosfs/EFISYS
# mount_msdosfs /dev/msdosfs/EFISYS /boot/efi
# cp -Rp /tmp/efitmp/* /boot/efi/

Afterwards you should have an EFI filesystem that is the full size of the partition, which is roughly 200M.

The upgrade should proceed after that.

If it doesn't work, roll back or reinstall. You never saw this post. That torpedo did not self-destruct. You heard it hit the hull. I was never here.

beatvjiking

@jimp this worked perfectly for me! I appreciate the help on all of this. I was willing to take the risk in this situation because if there was no workaround, it ended with me getting on a plane; if the workaround blew up the system, I'd be getting on a plane. Thank you for helping me take that calculated risk. And there's no plane involved!

slu

@jimp said in Unable to upgrade from 2.7.1 to 2.7.2 | Unmounting /boot/efi... done. | failed.:

You never saw this post.

Thank you @jimp I will try this never saw workaround. :)

Technical it's not a problem for me to reinstall, but I must travel hundreds of km between the offices...

josh.hall

@jimp I'll do my best Col. Klink impersonation. I see nothing! I know nothing!

Also, thanks for showing us that nothing. Might be less than elegant, and certainly risky... but, it means I don't need to physically move the system to a monitor to rebuild it completely. What's the point of working in software if we can't be a bit lazy now and then?

tighernain

@jimp

This worked for me, thank you for the help.

nol166

@jimp Logged in just to say thank you for posting this. It worked for me!

I appreciate your help!

crsesilva

@jimp Logged in just to say thank you for posting this. It worked for me!

I appreciate your help!

Making_sense_of_pfSense

My /boot/efi partition was 779K.

Then I ran the commands that @jimp provided and now it's 197M!

After that, pfSense-upgrade had no issue upgrading from 2.7.1 to 2.7.2!
Thank you so much!

slu

Confirm, it's working!

/dev/msdosfs/EFISYS                                197M    512B    197M     0%    /boot/efi

Thank you very much @jimp

Klaus2314

@slu same issue here, but the procedure above fixed it. thanks! I had to power cycle the device after reboot though. it did not come back after reboot. same on my SG1100.

Updating the EFI loader
install: //boot/efi/efi/boot/INS@8I5bRD: Input/output error
pkg-static: POST-INSTALL script failed

lnxfrk

@jimp said in Unable to upgrade from 2.7.1 to 2.7.2 | Unmounting /boot/efi... done. | failed.:

You never saw this post.

I'm certainly glad I saw this post. Thank you @jimp - At some point I'll plan on doing a fresh install as I'm sure that will help long term. I think the initial install for me was 2.4.5p1 so it's been a while.
Again, thanks!