23.09.1 upgrade crash

[joker169]

During upgrade from 23.09 to 23.09.1. The process started out smooth at first, went through most of the process but crashed and then boot looped once or twice. Then booted correctly and everything seems to be working correctly. Attached log from Dashboard.

Dump file:
textdump.tar.0

[jimp]

panic: bad pte va 2f5965890000 pte 0
cpuid = 4
time = 1681561282
KDB: enter: panic

db:1:pfs> bt
Tracing pid 82223 tid 100515 td 0xfffffe01164d1900
kdb_enter() at kdb_enter+0x32/frame 0xfffffe0116931b60
vpanic() at vpanic+0x182/frame 0xfffffe0116931bb0
panic() at panic+0x43/frame 0xfffffe0116931c10
pmap_remove_pages() at pmap_remove_pages+0x964/frame 0xfffffe0116931d60
vmspace_exit() at vmspace_exit+0x7f/frame 0xfffffe0116931d90
exit1() at exit1+0x571/frame 0xfffffe0116931df0
sys_exit() at sys_exit+0xd/frame 0xfffffe0116931e00
amd64_syscall() at amd64_syscall+0x10c/frame 0xfffffe0116931f30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe0116931f30
--- syscall (1, FreeBSD ELF64, sys_exit), rip = 0x2fd9614b486a, rsp = 0x2fd95cb6c188, rbp = 0x2fd95cb6c1a0 ---

Not a lot to go on there but it looks more like it's potentially a hardware issue and not a software issue. Not with 100% certainty but that seems more likely given the errors involved.

[joker169]

@jimp
Okay, havent had any crashes with any other software upgrades in the past and seems to be working now. Hardware may have crashed when something changed on the software side, i.e. boot loops. It is supermicro, so this is even more likely the cause. Thanks for looking at this, I've been looking at replacing this appliance with a like Netgate appliance, in the future.

Thanks again!