PfSense Memory only showing 1GB
-
Hmm, well that explains the dashboard. Seems like a hypervisor issue.
Was it ever set to 1G?
Has the VM been shutdown since it was changed?
-
@stephenw10 said in PfSense Memory only showing 1GB:
Has the VM been shutdown since it was changed?
Yes, it needs to be shut down. If you only reboot, the hypervisor cannot take over memory changes.
I tried to reproduce this issue. But I get the correct memory in pfSense, even with ballooning enabled.
I installed 2.7.2 on Proxmox 7.4 with 2 GB RAM. Then I changed the RAM to 3 GB. After I shut down the VM and booted up the memory was shown up correctly with 3GB again.
-
@viragomann Hi Thanks for the response.
When I changed the memory assignment/allocation in Proxmox from 16GB to 8GB and disable balooning, one of the step to get the VM to take the new configuration is to shutdown and power back on. However, in the PfSense itself I am still seeing it registered with 1GB unfortunately. :(
-
@stephenw10....since the initial setup of this PfSense, I've always have it set with 16GB memory. Yes, the VM have been shutdown on numerous occasions. Last shutdown was when I disabled the balooning and reduced the memory size from 16GB to 8GB.
I have just now shutdown the VM, bumped the memory from 8GB to 10GB and are still seeing the same.
-
Hmm, something in that VM config is passing only 1G for some reason. I don't know anything in pfSense that would present like that.
-
@stephenw10 ...Is there anywhere in the PfSense configuration that we can look into and edit to match the configured VM Memory?
-
@chrisuan
Not sure, if there is something in pfSense you can do to solve this issue. Possibly it's given by the hypervisor.To get sure that the hypervisor provides the correct virtual hardware, just start the VM with a live-ISO and check the memory inside the OS then.
-
Yeah, like I said, I'm not aware of anything you could set in pfSense that would make it present like that.
-
@viragomann Thanks....will give it a shot.
-
Wanted to provide an update regarding this issue to share awareness for those who are running into the similar issue I was experiencing.
I stumbled upon this forum, https://forum.proxmox.com/threads/not-showing-correct-ram-for-vm.70219/ and I confirmed inside of the Proxmox VM configuration, I had HotPlug enabled for both Memory and CPU.
As soon as I removed this from the VM Option and reboot, it resolved my issue and now I can see the correct Memory Allocation in the PFSense Dashboard.
