SG-3100 wont't boot
-
I tried to change the MTU of my PPP connection last night and after clicking save, the box froze and after waiting over 10 minutes, i unplugged it, waited for 10 secs and plugged it back, and now the sg3100 won't boot. I managed to access the console and below is the output of the console. I had to reinstall firmware on these netgate devices at least 4 times in the past 5 years (i have 4 devices from netgate) over the console and I find it frustrating that these bugs are not maintained properly
Awaiting a solution from you guys if you have any experience. I also will open a ticket once I get my info together.
2023-12-29T17:47:45.967022+03:00 - php-fpm 405 - - #12 {main}
2023-12-29T17:47:45.967077+03:00 - php-fpm 405 - - thrown
thrown
Fatal error: Uncaught ValueError: Path cannot be empty in /etc/inc/notices.inc:135
Stack trace:
#0 /etc/inc/notices.inc(135): fopen('', 'w')
#1 /etc/inc/config.lib.inc(1168): file_notice('phperror', 'PHP ERROR: Type...', 'PHP errors')
#2 [internal function]: pfSense_clear_globals()
#3 {main}
thrown in /etc/inc/notices.inc on line 135
Netgate pfSense Plus 23.09-RELEASE arm 20231031-1956
Bootup completeFreeBSD/arm (Amnesiac) (ttyu0)
2023-12-29T17:47:46.410723+03:00 - login 601 - - login on ttyu0 as root
Fatal error: Uncaught ValueError: Path cannot be empty in /etc/inc/notices.inc:135
Stack trace:
#0 /etc/inc/notices.inc(135): fopen('', 'w')
#1 /etc/inc/config.lib.inc(95): file_notice('config.xml', 'No config.xml f...', 'pfSenseConfigur...', '')
#2 /etc/inc/config.gui.inc(53): parse_config()
#3 /etc/inc/auth.inc(34): require_once('/etc/inc/config...')
#4 /etc/inc/openvpn.inc(36): require_once('/etc/inc/auth.i...')
#5 /etc/inc/filter.inc(30): require_once('/etc/inc/openvp...')
#6 /etc/inc/ipsec.inc(25): require_once('/etc/inc/filter...')
#7 /etc/inc/gwlb.inc(27): require_once('/etc/inc/ipsec....')
#8 /etc/inc/functions.inc(35): require_once('/etc/inc/gwlb.i...')
#9 /etc/inc/notices.inc(26): require_once('/etc/inc/functi...')
#10 /etc/inc/config.inc(37): require_once('/etc/inc/notice...')
#11 /etc/rc.banner(27): require_once('/etc/inc/config...')
#12 {main}
thrown in /etc/inc/notices.inc on line 135
PHP ERROR: Type: 1, File: /etc/inc/notices.inc, Line: 135, Message: Uncaught ValueError: Path cannot be empty in /etc/inc/notices.inc:135
Stack trace:
#0 /etc/inc/notices.inc(135): fopen('', 'w')
#1 /etc/inc/config.lib.inc(95): file_notice('config.xml', 'No config.xml f...', 'pfSenseConfigur...', '')
#2 /etc/inc/config.gui.inc(53): parse_config()
#3 /etc/inc/auth.inc(34): require_once('/etc/inc/config...')
#4 /etc/inc/openvpn.inc(36): require_once('/etc/inc/auth.i...')
#5 /etc/inc/filter.inc(30): require_once('/etc/inc/openvp...')
#6 /etc/inc/ipsec.inc(25): require_once('/etc/inc/filter...')
#7 /etc/inc/gwlb.inc(27): require_once('/etc/inc/ipsec....')
#8 /etc/inc/functions.inc(35): require_once('/etc/inc/gwlb.i...')
#9 /etc/inc/notices.inc(26): require_once('/etc/inc/functi...')
#10 /etc/inc/config.inc(37): require_once('/etc/inc/notice...')
#11 /etc/rc.banner(27): require_once('/etc/inc/config...')
#12 {main}
thrown
Fatal error: Uncaught ValueError: Path cannot be empty in /etc/inc/notices.inc:135
Stack trace:
#0 /etc/inc/notices.inc(135): fopen('', 'w')
#1 /etc/inc/config.lib.inc(1168): file_notice('phperror', 'PHP ERROR: Type...', 'PHP errors')
#2 [internal function]: pfSense_clear_globals()
#3 {main}
thrown in /etc/inc/notices.inc on line 135- Logout (SSH only) 9) pfTop
- Assign Interfaces 10) Filter Logs
- Set interface(s) IP address 11) Restart webConfigurator
- Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools
- Reset to factory defaults 13) Update from console
- Reboot system 14) Enable Secure Shell (sshd)
- Halt system 15) Restore recent configuration
- Ping host 16) Restart PHP-FPM
- Shell
Enter an option:
-
It can't open the file to write the notice.
Since you had to pull the power the first thing I would do is run a manual fsck:
https://docs.netgate.com/pfsense/en/latest/troubleshooting/filesystem-check.html#manual-filesystem-checkSteve
