QLogic QLE 2464

[adambar1133]

Hi all,

Im wondering if someone with more knowledge and experience with fibre cards could share some insight as to what I may be missing in not sure if it’s a driver issue, settings issue or compatibility issue (it is possibly a comparability issue as I can find a QLE 2464 listed on any free BSD compatibility documents) however pfsense is able to see the card on boot and so I’m wondering if drivers may be available or some settings that I may need to adjust for this card to be used as uplinks are not starting and the rear LEDs of the card are only display a water fall effect. Any advice would be much appreciated below are the os boot logs.

Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT amd64 1400094 #1 RELENG_2_7_2-n255948-8d2b56da39c: Wed Dec 6 20:45:47 UTC 2023
root@freebsd:/var/jenkins/workspace/pfSense-CE-snapshots-2_7_2-main/obj/amd64/StdASW5b/var/jenkins/workspace/pfSense-CE-snapshots-2_7_2-main/sources/FreeBSD-src-RELENG_2_7_2/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz (2666.87-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33339527168 (31795 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
random: unblocking device.
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20221020/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20221020/tbfadt-850)
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
Launching APs: 3 1 2
TCP_ratelimit: Is now initialized
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807475a0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80747650, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80747700, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765180, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80765230, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff807652e0, 0) error 1
random: entropy device external interface
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
netgate0: <unknown hardware>
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xf4f40-0xf4f5e
smbios0: Version: 2.4, BCD Revision: 2.4
acpi0: <HP ProLiant>
acpi0: Power Button (fixed)
Firmware Error (ACPI): AE_AML_BUFFER_LIMIT, Field [CDW3] at bit offset/length 64/32 exceeds size of target Buffer (64 bits) (20221020/dsopcode-356)
ACPI Error: Aborting method \134_SB._OSC due to previous error (AE_AML_BUFFER_LIMIT) (20221020/psparse-689)
acpi0: _OSC failed: AE_AML_BUFFER_LIMIT
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
ACPI Warning: \134_SB.PCI0.PT02._PRT: Return Package has no elements (empty) (20221020/nsprepkg-251)
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0x5000-0x501f mem 0xfdce0000-0xfdcfffff,0xfdcc0000-0xfdcdffff irq 16 at device 0.0 on pci3
em0: EEPROM V5.6-2
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 00:15:17:c9:34:50
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) PRO/1000 PT 82571EB/82571GB (Copper)> port 0x5020-0x503f mem 0xfdca0000-0xfdcbffff,0xfdc80000-0xfdc9ffff irq 17 at device 0.1 on pci3
em1: EEPROM V5.6-2
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using an MSI interrupt
em1: Ethernet address: 00:15:17:c9:34:51
em1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib4: <PCI-PCI bridge> at device 1.0 on pci2
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 2.0 on pci2
pci5: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci7: <ACPI PCI bus> on pcib7
ciss0: <HP Smart Array P400i> port 0x4000-0x40ff mem 0xfda00000-0xfdafffff,0xfd9f0000-0xfd9f0fff irq 16 at device 0.0 on pci7
ciss0: PERFORMANT Transport
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> mem 0xfdde0000-0xfddfffff at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 1.0 on pci9
pci10: <PCI bus> on pcib10
isp0: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x6000-0x60ff mem 0xfdef0000-0xfdef3fff irq 18 at device 0.0 on pci10
isp0: FLT[DEF]: Invalid length=0xffff(65535)
isp0: invalid NVRAM header (55 aa 58)
isp0: FLT[DEF]: Invalid length=0xffff(65535)
isp0: invalid NVRAM header (55 aa 58)
isp0: bad frame length (0) from NVRAM - using 1024
isp1: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x6400-0x64ff mem 0xfdee0000-0xfdee3fff irq 19 at device 0.1 on pci10
isp1: FLT[DEF]: Invalid length=0xffff(65535)
isp1: invalid NVRAM header (55 aa 58)
isp1: FLT[DEF]: Invalid length=0xffff(65535)
isp1: invalid NVRAM header (55 aa 58)
isp1: bad frame length (0) from NVRAM - using 1024
pcib11: <PCI-PCI bridge> at device 2.0 on pci9
pci11: <PCI bus> on pcib11
isp2: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x7000-0x70ff mem 0xfdff0000-0xfdff3fff irq 19 at device 0.0 on pci11
isp2: FLT[DEF]: Invalid length=0xffff(65535)
isp2: invalid NVRAM header (55 aa 58)
isp2: FLT[DEF]: Invalid length=0xffff(65535)
isp2: invalid NVRAM header (55 aa 58)
isp2: bad frame length (0) from NVRAM - using 1024
isp3: <Qlogic ISP 2432 PCI FC-AL Adapter> port 0x7400-0x74ff mem 0xfdfe0000-0xfdfe3fff irq 16 at device 0.1 on pci11
isp3: FLT[DEF]: Invalid length=0xffff(65535)
isp3: invalid NVRAM header (55 aa 58)
isp3: FLT[DEF]: Invalid length=0xffff(65535)
isp3: invalid NVRAM header (55 aa 58)
isp3: bad frame length (0) from NVRAM - using 1024
pcib12: <PCI-PCI bridge> at device 5.0 on pci0
pci12: <PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci13: <ACPI PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 0.0 on pci13
pci14: <ACPI PCI bus> on pcib14
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci14
bce0: /var/jenkins/workspace/pfSense-CE-snapshots-2_7_2-main/sources/FreeBSD-src-RELENG_2_7_2/sys/dev/bce/if_bce.c(1265): Management firmware enabled but not running!
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Using defaults for TSO: 65518/35/2048
bce0: Ethernet address: 00:1b:78:76:e7:aa
bce0: ASIC (0x57081020);
bce0: link state changed to DOWN
Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!)
Coal (RX:6,6,18,18; TX:20,20,80,80)
pcib15: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci15: <ACPI PCI bus> on pcib15
pcib16: <ACPI PCI-PCI bridge> at device 0.0 on pci15
pci16: <ACPI PCI bus> on pcib16
bce1: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xfa000000-0xfbffffff irq 19 at device 0.0 on pci16
bce1: /var/jenkins/workspace/pfSense-CE-snapshots-2_7_2-main/sources/FreeBSD-src-RELENG_2_7_2/sys/dev/bce/if_bce.c(1265): Management firmware enabled but not running!
miibus1: <MII bus> on bce1
brgphy1: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Using defaults for TSO: 65518/35/2048
bce1: Ethernet address: 00:1b:78:76:e7:ac
bce1: ASIC (0x57081020);
bce1: link state changed to DOWN
Rev (B2); Bus (PCI-X, 64-bit, 133MHz); B/C (1.9.6); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NOT RUNNING!)
Coal (RX:6,6,18,18; TX:20,20,80,80)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1000-0x101f irq 16 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1020-0x103f irq 17 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1040-0x105f irq 18 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1060-0x107f irq 19 at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf7df0000-0xf7df03ff irq 16 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib17: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci17: <ACPI PCI bus> on pcib17
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xd8000000-0xdfffffff,0xf7ff0000-0xf7ffffff irq 23 at device 3.0 on pci17
vgapci0: Boot video device
uhci4: <HP iLO Standard Virtual USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci17
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
pci17: <serial bus> at device 4.6 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 17 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> port 0x2e-0x2f,0x4e-0x4f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x30f on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcafff,0xd2000-0xe07ff,0xe6000-0xe7fff pnpid ORM0000 on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 828082806000828
device_attach: est3 attach returned 6
Timecounter "TSC-low" frequency 1333380594 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen4.1: <Intel EHCI root HUB> at usbus4
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub0 on usbus0
uhub1 on usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2 on usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3bce1: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006)
on usbus4
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
bce0: bce_pulse(): Warning: bootcode thinks driver is absent! (bc_state = 0x00000006)
ugen3.1: <Intel UHCI root HUB> at usbus3
uhub4 on usbus3
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen5.1: <HP UHCI root HUB> at usbus5
uhub5 on usbus5
uhub5: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
Trying to mount root from zfs:pfSense/ROOT/default []...
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
ugen5.2: <HP Virtual Keyboard> at usbus5
ukbd0 on uhub5
ukbd0: <Virtual Keyboard> on usbus5
kbd2 at ukbd0
Root mount waiting for: CAM usbus4 usbus5
ugen5.3: <HP Virtual Hub> at usbus5
uhub6 on uhub5
uhub6: <Virtual Hub> on usbus5
Root mount waiting for: CAM usbus4 usbus5
uhub6: 7 ports with 7 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: CAM
ugen2.2: <DaKai USB Keyboard> at usbus2
ukbd1 on uhub2
ukbd1: <DaKai USB Keyboard, class 0/0, rev 1.10/aa.01, addr 2> on usbus2
kbd3 at ukbd1
ukbd2 on uhub2
ukbd2: <DaKai USB Keyboard, class 0/0, rev 1.10/aa.01, addr 2> on usbus2
kbd4 at ukbd2
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 0 OK> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number PH74MV6054
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 139980MB (286679925 512 byte sectors)
cd0 at ata0 bus 0 scbus6 target 0 lun 0
cd0: <TEAC DW-224E-V C.CA> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
(da0:ciss0:0:0:0): SYNCHRONIZE CACHE(10). CDB: 35 00 00 00 00 00 00 00 00 00
(da0:ciss0:0:0:0): CAM status: SCSI Status Error
(da0:ciss0:0:0:0): SCSI status: Check Condition
(da0:ciss0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(da0:ciss0:0:0:0): Error 22, Unretryable error
CPU: Intel(R) Xeon(R) CPU 5150 @ 2.66GHz (2666.76-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6f6 Family=0x6 Model=0xf Stepping=6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics

[stephenw10]

So the isp0-3 devices there? That a fibre-channel card as far as I can see. What are you trying to connect it to?

You could try setting hint.isp.N.ignore_nvram since it's showing an NVRAM error:
isp0: invalid NVRAM header (55 aa 58)

[adambar1133]

@stephenw10
Many thanks for your reply. Yes it is a fibre channel card I’m trying to use it as the main WAN uplink and the uplink to my switches using CISCO transceiver module's. I have tryed setting hint.isp.N.ignore_nvram through boot/device.hints which has returned the same error on reboot.

[stephenw10]

Hmm, I'm not sure if that card actually can be used for Ethernet. The isp(4) driver is for fibre channel (storage).

[adambar1133]

@stephenw10

I think you are correct I’ve looked through the freeBSD website and have attempted to load the ISPFW firmware with no change the card does interface with freebsd but not as a network card, I’ll be moving this over to my true NAS system instead I think. What would your recommendation be for a 4 port fibre card to use in this circumstance. Many thanks for all your help it is very much appreciated.

[stephenw10]

The ixl (X710) Intel card we sell works well. I've also used older X520 based cards successfully.