Load updated Intel IX module to get 10Gbps

ogghi

@stephenw10 That's kind of what I tried, but it wouldn't work, as I mentioned above it would not apply fw rules, NAT etc.
So I restored from backup...
When doing such things I always have a monitor + keyboard ready in the rack for local console access ;)

ogghi

@stephenw10
I managed to change interfaces.
Still no improvement, I even tried to remove some advanced settings:

I guess time to test some tuning, but given that we will need to restart each time, I need to do it early morning or during next maintenance window...

Any suggestions?
I still have some things in /boot/loader.conf.local

net.inet.tcp.tso="0"
if_ix_updated_load="YES"
hw.ix.flow_control="0"
hw.ix.num_queues=40
hw.ix.enable_aim=1
hw.ix.max_interrupt_rate=30000
kern.ipc.nmbclusters="1000000"
kern.ipc.nmbjumbop="524288"
machdep.hyperthreading_intr_allowed=1

Might make sense to remove, reboot and try?

stephenw10

Ok so you're using the Mellanox (mce) NICs now? And still seeing ~4Gbps? Per core CPU usage is still low when testing?

ogghi

@stephenw10

[  5]  37.00-38.00  sec   274 MBytes  2.30 Gbits/sec  812    462 KBytes       
[  5]  38.00-39.00  sec   297 MBytes  2.49 Gbits/sec  479    624 KBytes       
[  5]  39.00-40.00  sec   269 MBytes  2.26 Gbits/sec  724    632 KBytes       
[  5]  40.00-41.00  sec   265 MBytes  2.22 Gbits/sec  685    441 KBytes       
[  5]  41.00-42.00  sec   262 MBytes  2.20 Gbits/sec   65    510 KBytes       
[  5]  42.00-43.00  sec   248 MBytes  2.08 Gbits/sec  770    553 KBytes       
[  5]  43.00-44.00  sec   245 MBytes  2.06 Gbits/sec  971   96.2 KBytes       
[  5]  44.00-45.00  sec   285 MBytes  2.39 Gbits/sec  296    607 KBytes       
[  5]  45.00-46.00  sec   262 MBytes  2.20 Gbits/sec  1108    454 KBytes       
[  5]  46.00-47.00  sec   260 MBytes  2.18 Gbits/sec  690    481 KBytes       
[  5]  47.00-48.00  sec   257 MBytes  2.15 Gbits/sec  582    545 KBytes       
[  5]  48.00-49.00  sec   275 MBytes  2.31 Gbits/sec  253    568 KBytes       
[  5]  49.00-50.00  sec   248 MBytes  2.08 Gbits/sec  1163    399 KBytes       
[  5]  50.00-51.00  sec   264 MBytes  2.21 Gbits/sec  358    453 KBytes       
[  5]  51.00-52.00  sec   274 MBytes  2.30 Gbits/sec  175    446 KBytes       
[  5]  52.00-53.00  sec   267 MBytes  2.24 Gbits/sec  864    457 KBytes       
[  5]  53.00-54.00  sec   283 MBytes  2.37 Gbits/sec  250    496 KBytes       
[  5]  54.00-55.00  sec   276 MBytes  2.32 Gbits/sec  326    542 KBytes       
[  5]  55.00-56.02  sec   272 MBytes  2.25 Gbits/sec  866    552 KBytes       
[  5]  56.02-57.00  sec   268 MBytes  2.29 Gbits/sec  629    554 KBytes       
[  5]  57.00-58.01  sec   271 MBytes  2.24 Gbits/sec  122    594 KBytes       
[  5]  58.01-59.00  sec   247 MBytes  2.10 Gbits/sec  565    464 KBytes       
[  5]  59.00-60.00  sec   279 MBytes  2.34 Gbits/sec  864    457 KBytes       
[  5]  60.00-61.00  sec   260 MBytes  2.18 Gbits/sec  864    464 KBytes       
[  5]  61.00-62.00  sec   257 MBytes  2.16 Gbits/sec  776    506 KBytes       
[  5]  62.00-63.02  sec   268 MBytes  2.21 Gbits/sec  174    562 KBytes       
[  5]  63.02-64.01  sec   256 MBytes  2.15 Gbits/sec  873    158 KBytes       
[  5]  64.01-65.00  sec   249 MBytes  2.12 Gbits/sec  770    428 KBytes       
[  5]  65.00-66.00  sec   253 MBytes  2.12 Gbits/sec  619    481 KBytes       
[  5]  66.00-67.02  sec   280 MBytes  2.31 Gbits/sec  603    520 KBytes       
[  5]  67.02-68.02  sec   250 MBytes  2.10 Gbits/sec  779    428 KBytes       
[  5]  68.02-69.00  sec   261 MBytes  2.22 Gbits/sec  253    454 KBytes       
[  5]  69.00-70.00  sec   264 MBytes  2.22 Gbits/sec  632    484 KBytes       
[  5]  70.00-71.00  sec   256 MBytes  2.15 Gbits/sec  864    514 KBytes       
[  5]  71.00-72.00  sec   256 MBytes  2.14 Gbits/sec  772    564 KBytes       
[  5]  72.00-73.00  sec   255 MBytes  2.15 Gbits/sec  732    425 KBytes       
[  5]  73.00-74.00  sec   268 MBytes  2.25 Gbits/sec  652    474 KBytes

This seems even worse right now.
CPU usage is not noticibly higher than no huge transfer.

Maybe it's about changing some settings and try now?

stephenw10

So.... not using Mellanox NICs?

ogghi

@stephenw10 I am using the Mellanox cards.

I will most likely test to change settings here (again)

Suggestions?

stephenw10

I would certainly disable the hardware offloading there in case something isn't correctly supported under mlx.

Those iperf figures are through the firewall rather than to/from it?

ogghi

@stephenw10
YAY!
This finally is all good and fast now!

Iperf (with 10 parallel streams) shows (a bit bouncing but hey) 9.2Gbps as peak

I enabled HW TSO and HW LRO

Thanks for the support!

Also: CPU load is not much either. So ++ for the Mellanox cards!

stephenw10

Nice. Just to be clear you 'set' those options in the GUI, actually disabled them?

ogghi

@stephenw10 yes, this is how it looks now:

stephenw10

Excellent, thanks!