[SOLVED] Access Gateway Status from Shell

guardian

Is there a way that I can get the info normally under the gateways section of the dashboard from the shell?

I don't know if I am the only one that finds logging into the WebGUI very slow -- and even slower if there are connectivity issues.

I can easily ssh in, and I don't find that resource utilization is out of line (maybe 2 on 4 thread machine - and free memory available too). It would be very helpful if I could use SSH from troubleshooting during connectivity issues.

stephenw10

[2.7.2-RELEASE][admin@t70.stevew.lan]/root: pfSsh.php playback gatewaystatus
Name      Monitor      Source             Delay   StdDev  Loss  Status  Substatus
WAN_DHCP  172.21.16.1  172.21.16.226    0.651ms  0.112ms  0.0%  online       none

Steve

guardian

@stephenw10 said in Access Gateway Status from Shell:

[2.7.2-RELEASE][admin@t70.stevew.lan]/root: pfSsh.php playback gatewaystatus
Name      Monitor      Source             Delay   StdDev  Loss  Status  Substatus
WAN_DHCP  172.21.16.1  172.21.16.226    0.651ms  0.112ms  0.0%  online       none

Steve

Thanks @stephenw10 exactly what I am looking for - any idea what the update frequency is?

stephenw10

I don't but I imagine it's whatever rate dpinger updates the data.

guardian

@stephenw10 said in [SOLVED] Access Gateway Status from Shell:

I don't but I imagine it's whatever rate dpinger updates the data.

@stephenw10 is there any way to figure this out easily?

stephenw10

Well if we look at how dpinger is called in pfSense, for example

/usr/local/bin/dpinger -S -r 0 -i WAN_DHCP -B 172.21.16.226 -p /var/run/dpinger_WAN_DHCP~172.21.16.226~172.21.16.1.pid -u /var/run/dpinger_WAN_DHCP~172.21.16.226~172.21.16.1.sock -C /etc/rc.gateway_alarm -d 1 -s 500 -l 2000 -t 60000 -A 1000 -D 500 -L 20 172.21.16.1

And at the man page: https://github.com/dennypage/dpinger

It appears the values are available on demand (-r 0) whenever it's called.