Netgate 2100 Customization of LEDs (Guide)

wgstarks

Thanks. Have had that installed for a while.

JonathanLee

@stephenw10 Can you please help me?
Where is the standard led program in pfSense filesystem located it would be easier to just call that program if the gateway is up for @wgstarks request. He wants to normalize the LED behavior if the gateway is up. I could just set the scrip to call that program if needed. /dev/led is not listed in 2100 file system

JonathanLee

@wgstarks

To normalize it call this program originally sets bootup conditions, I am searching for the file it calls

/usr/local/sbin/pfSense-led.sh

JonathanLee

@wgstarks

set the program to call

/usr/local/sbin/pfSense-led.sh ready

Use that for the else condition that would normalize it automatically for your model

wgstarks

Thanks. I’ll test this and see if I can get it working.

JonathanLee

This post is deleted!

JonathanLee

I got it don't use DNS use the interfaces name and pinger

pfctl -vvss | grep -e "mvneta0 icmp"

that works!!!

#!/bin/sh
led_intensity=0
while [ $led_intensity -le 8 ]; do
  gpioctl -f /dev/gpioc2 $led_intensity duty 0 >/dev/null
  led_intensity=$(( led_intensity + 1 ))
done

check_current_states=$( pfctl -vvss | grep -e "mvneta0 icmp" )
WAN=0
case "$check_current_states" in
  *icmp* ) WAN=1 ;;
esac
if [ $WAN = 0 ];
then
 sysctl -q dev.gpio.2.led.0.pwm=0
 gpioctl -f /dev/gpioc2 0 duty 200 >/dev/null
 sysctl -q dev.gpio.2.led.1.pwm=0
 gpioctl -f /dev/gpioc2 3 duty 200 >/dev/null
 sysctl -q dev.gpio.2.led.2.pwm=0
 gpioctl -f /dev/gpioc2 6 duty 200 >/dev/null
else
  /usr/local/sbin/pfSense-led.sh ready

fi

Your mvneta0 might be different over the 2100 check it on Interface Assignments, that is the pinger state used to check to see if gateway is up just use it for the program also

YEAH!!

Just updated after testing 4:07 7-18-24

JonathanLee

Update to mine to reflect the gateway offline

#!/bin/sh
check_current_states=$( pfctl -vvss | grep -e ', rule 105' -e ', rule 52' -e '192.168.1.11' -e '192.168.1.15' -e 'mvneta0 icmp' )
res=1
resb=1
resc=1
resd=1
WAN=1
case "$check_current_states" in
  *icmp* ) WAN=0 ;;
esac
if [ $WAN = 1 ];
then
 sysctl -q dev.gpio.2.led.0.pwm=0
 gpioctl -f /dev/gpioc2 0 duty 200 >/dev/null
 sysctl -q dev.gpio.2.led.1.pwm=0
 gpioctl -f /dev/gpioc2 3 duty 200 >/dev/null
 sysctl -q dev.gpio.2.led.2.pwm=0
 gpioctl -f /dev/gpioc2 6 duty 200 >/dev/null
 exit 1
 fi
case "$check_current_states" in 
  *", rule 105"* ) res=0 ;;
esac
case "$check_current_states" in
  *192.168.1.11* ) resb=0 ;;
esac
case "$check_current_states" in
  *192.168.1.15* ) resc=0 ;;
esac
case "$check_current_states" in
  *", rule 52"* ) resd=0 ;;
esac
if [ $res = 0 ] && [ $resb = 0 ]; 
then
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 50 >/dev/null
  gpioctl -f /dev/gpioc2 4 duty 15 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=0
  gpioctl -f /dev/gpioc2 6 duty 55 >/dev/null
  gpioctl -f /dev/gpioc2 7 duty 20 >/dev/null
  gpioctl -f /dev/gpioc2 8 duty 15 >/dev/null
elif [ $res = 0 ];
then
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 4 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=0
  gpioctl -f /dev/gpioc2 6 duty 55 >/dev/null
  gpioctl -f /dev/gpioc2 7 duty 20 >/dev/null
  gpioctl -f /dev/gpioc2 8 duty 15 >/dev/null
elif [ $resb = 0 ];
then
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 7 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 8 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 50 >/dev/null
  gpioctl -f /dev/gpioc2 4 duty 15 >/dev/null
else
  sysctl -q dev.gpio.2.led.1.pwm=1
  gpioctl -f /dev/gpioc2 3 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 4 duty 0 >/dev/null
  sysctl -q dev.gpio.2.led.2.pwm=1
  gpioctl -f /dev/gpioc2 6 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 7 duty 50 >/dev/null
  gpioctl -f /dev/gpioc2 8 duty 0 >/dev/null
  
fi
if [ $resc = 0 ] || [ $resd = 0 ];
then
  sysctl -q dev.gpio.2.led.0.pwm=1
  gpioctl -f /dev/gpioc2 2 duty 50 >/dev/null
  gpioctl -f /dev/gpioc2 0 duty 50 >/dev/null
else
  sysctl -q dev.gpio.2.led.0.pwm=1
  gpioctl -f /dev/gpioc2 2 duty 0 >/dev/null
  gpioctl -f /dev/gpioc2 0 duty 0 >/dev/null

fi

wgstarks

When I test in shell I get the following result-

gpio_open: No such file or directory
gpio_open: No such file or directory
gpio_open: No such file or directory
gpio_open: No such file or directory
gpio_open: No such file or directory
gpio_open: No such file or directory
gpio_open: No such file or directory
gpio_open: No such file or directory
gpio_open: No such file or directory

My script-

#!/bin/sh
led_intensity=0
while [ $led_intensity -le 8 ]; do
  gpioctl -f /dev/gpioc2 $led_intensity duty 0 >/dev/null
  led_intensity=$(( led_intensity + 1 ))
done

check_current_states=$( pfctl -vvss | grep -e "igc3 icmp" )
WAN=0
case "$check_current_states" in
  *icmp* ) WAN=1 ;;
esac
if [ $WAN = 0 ];
then
 sysctl -q dev.gpio.2.led.0.pwm=0
 gpioctl -f /dev/gpioc2 0 duty 200 >/dev/null
 sysctl -q dev.gpio.2.led.1.pwm=0
 gpioctl -f /dev/gpioc2 3 duty 200 >/dev/null
 sysctl -q dev.gpio.2.led.2.pwm=0
 gpioctl -f /dev/gpioc2 6 duty 200 >/dev/null
else
  /usr/local/sbin/pfSense-led.sh ready

fi

JonathanLee

@wgstarks

Do me a favor take a look in
/usr/local/sbin/pfSense-led.sh

Find your model firewall and tell me what directive is used to change the LEDS…

Also peek in /dev/led see if you have that folder, if you do it should be easy to adapt with the directive used for your model

wgstarks

@JonathanLee said in Netgate 2100 Customization of LEDs (Guide):

@wgstarks

Do me a favor take a look in
/usr/local/sbin/pfSense-led.sh

Find your model firewall and tell me what directive is used to change the LEDS…

Maybe this is what you need.


# Netgate 4200
#

4200_led_off() {
	local _leds="red_0 green_0 blue_0 red_1 green_1 blue_1 red_2 green_2 blue_2"

	for led in ${_leds}; do
		echo 0 > /dev/led/${led}
	done
}

4200_led_booting() {
	4200_led_off
	# Fast blink blue on all LEDs
	echo f2 > /dev/led/blue_0
	echo f2 > /dev/led/blue_1
	echo f2 > /dev/led/blue_2
}

4200_led_ready() {
	4200_led_off
	# Left LED solid blue
	echo 1 > /dev/led/blue_2
}

4200_led_update() {
	# Purple on center LED
	echo 1 > /dev/led/red_1
	echo 0 > /dev/led/green_1
	echo 1 > /dev/led/blue_1
}

4200_led_update_off() {
	# Turn off center LED only
	echo 0 > /dev/led/red_1
	echo 0 > /dev/led/green_1
	echo 0 > /dev/led/blue_1
}

4200_led_updating() {
	4200_led_off
	# Fast green blink on all LEDs
	echo f2 > /dev/led/green_0
	echo f2 > /dev/led/green_1
	echo f2 > /dev/led/green_2
}

JonathanLee

@wgstarks said in Netgate 2100 Customization of LEDs (Guide):

echo f2 > /dev/led/blue_0
echo f2 > /dev/led/blue_1
echo f2 > /dev/led/blue_2

try this one

#!/bin/sh
echo 0 > /dev/led/blue_0
echo 0 > /dev/led/blue_1
echo 0 > /dev/led/blue_2
echo 0 > /dev/led/red_0
echo 0 > /dev/led/red_1
echo 0 > /dev/led/red_2
echo 0 > /dev/led/green_0
echo 0 > /dev/led/green_1
echo 0 > /dev/led/green_2

check_current_states=$( pfctl -vvss | grep -e "igc3 icmp" )
WAN=0
case "$check_current_states" in
  *icmp* ) WAN=1 ;;
esac
if [ $WAN = 0 ];
then
 echo f2 > /dev/led/red_0
 echo f2 > /dev/led/red_1
 echo f2 > /dev/led/red_2
else
  /usr/local/sbin/pfSense-led.sh ready

fi

Or to just turn on solid red

#!/bin/sh
echo 0 > /dev/led/blue_0
echo 0 > /dev/led/blue_1
echo 0 > /dev/led/blue_2
echo 0 > /dev/led/red_0
echo 0 > /dev/led/red_1
echo 0 > /dev/led/red_2
echo 0 > /dev/led/green_0
echo 0 > /dev/led/green_1
echo 0 > /dev/led/green_2

check_current_states=$( pfctl -vvss | grep -e "igc3 icmp" )
WAN=0
case "$check_current_states" in
  *icmp* ) WAN=1 ;;
esac
if [ $WAN = 0 ];
then
 echo 1 > /dev/led/red_0
 echo 1 > /dev/led/red_1
 echo 1 > /dev/led/red_2
else
  /usr/local/sbin/pfSense-led.sh ready

fi

Please let me know if that works unplug wan it should come on red when you test it.

After set your cron job to what ever amount of timer you want every min check it or whatever you want. Mine runs every min

make sure you chmod the file also so it can run.

if you want just do a chmod 777 on it and or a more secure privilege.

I have some that run in the day and some at night so this is my 6am - 8:59 one

Screenshot 2024-07-18 at 18.00.29.png

wgstarks

@JonathanLee said in Netgate 2100 Customization of LEDs (Guide):

@wgstarks said in Netgate 2100 Customization of LEDs (Guide):

echo f2 > /dev/led/blue_0
echo f2 > /dev/led/blue_1
echo f2 > /dev/led/blue_2

try this one
#!/bin/sh
echo 0 > /dev/led/blue_0
echo 0 > /dev/led/blue_1
echo 0 > /dev/led/blue_2
echo 0 > /dev/led/red_0
echo 0 > /dev/led/red_1
echo 0 > /dev/led/red_2
echo 0 > /dev/led/green_0
echo 0 > /dev/led/green_1
echo 0 > /dev/led/green_2

check_current_states=$( pfctl -vvss | grep -e "igc3 icmp" )
WAN=0
case "$check_current_states" in
  *icmp* ) WAN=1 ;;
esac
if [ $WAN = 0 ];
then
 echo f2 > /dev/led/red_0
 echo f2 > /dev/led/red_1
 echo f2 > /dev/led/red_2
else
  /usr/local/sbin/pfSense-led.sh ready

fi
Or to just turn on solid red
#!/bin/sh
echo 0 > /dev/led/blue_0
echo 0 > /dev/led/blue_1
echo 0 > /dev/led/blue_2
echo 0 > /dev/led/red_0
echo 0 > /dev/led/red_1
echo 0 > /dev/led/red_2
echo 0 > /dev/led/green_0
echo 0 > /dev/led/green_1
echo 0 > /dev/led/green_2

check_current_states=$( pfctl -vvss | grep -e "igc3 icmp" )
WAN=0
case "$check_current_states" in
  *icmp* ) WAN=1 ;;
esac
if [ $WAN = 0 ];
then
 echo 1 > /dev/led/red_0
 echo 1 > /dev/led/red_1
 echo 1 > /dev/led/red_2
else
  /usr/local/sbin/pfSense-led.sh ready

fi
Please let me know if that works unplug wan it should come on red when you test it.

After set your cron job to what ever amount of timer you want every min check it or whatever you want. Mine runs every min

make sure you chmod the file also so it can run.

if you want just do a chmod 777 on it and or a more secure privilege.

I have some that run in the day and some at night so this is my 6am - 8:59 one

I like the blinking red. More of an attention getter IMO. Working beautifully. Thanks for the script and the help.

wgstarks

Is it possible to increase the brightness? And blink all three?

JonathanLee

@wgstarks said in Netgate 2100 Customization of LEDs (Guide):

IMO

Great, no problem enjoy. I have one that turns purple when my wife has her work stuff on... royal purple means do not mess with firewall when she is working... haha

JonathanLee

@wgstarks that you would need to ask an official Netgate rep about, I only have a 2100 so I can only use the directives that my model uses.

I wonder if you can also...

@stephenw10 Do you know what the LED intensity directive is on the 4200?

wgstarks

Only the first and third led's are blinking. I'm fairly sure the code is for all three right? I wonder if it's possible to test them?

JonathanLee

@wgstarks does the 2nd glow red? The f2 directive might only work for led 0 and 2 test with the echo command

wgstarks

@JonathanLee said in Netgate 2100 Customization of LEDs (Guide):

@wgstarks does the 2nd glow red?

No but I see 0,1 and 2 in the code so wondering if it's a bad led.

JonathanLee

@wgstarks check the file in /dev/led red 2