Netgate 1100 boots to Amnesiac login
-
Howdy,
I have a Netgate 1100 which failed during a routine update with the GUI. I am connected with serial/USB and am getting a BSD/Amnesiac login, though I cannot login with the known password, default password or no password using either root or admin as the username.
Here is the console output:
groups: enc nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> add host 127.0.0.1: gateway lo0 fib 0: route already in table add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Updating motd:. Updating /var/run/os-release done. Clearing /tmp (X related). Creating and/or trimming log files. Starting syslogd. Mounting late filesystems:. Starting cron. /etc/rc: WARNING: $scponlyc_enable is not set properly - see rc.conf(5). /etc/rc: WARNING: $sshguard_enable is not set properly - see rc.conf(5). Starting background file system checks in 60 seconds. Thu Jan 1 00:00:26 UTC 1970 FreeBSD/arm64 (Amnesiac) (ttyu0) login: -
The fastest way back is probably to reinstall 23.09.1 clean if you have a config backup.
You should be able to login at the amnesiac prompt though. admin/pfsense or root/pfsense should work if it's unable to find any login config. Also try admin/root.
Otherwise root/<your_password> should work if it can still see that config.Steve
