could not connect to /var/run/php-fpm.socket pfsense

[rjcab]

Hello,

I have an issue with Pfsense. I have two interfaces and one of them is an adaptater Ethernet USB3.0 for the LAN.

I got the message:

I got 502 Bad Gateway, nginx message so I did 16) Restart PHP-FPM and it works for several minutes and then down again.
I went to the log files and I saw a lot of:

could not connect to /var/run/php-fpm.socket pfsense

But something is strange, when I did Restart PHP-FPM I don't see any logs in var/log/nginx: cat error.log

Feb 22 20:23:29 fw check_reload_status[64234]: Linkup starting ue0
Feb 22 20:23:29 fw check_reload_status[64234]: Linkup starting ue0
Feb 22 20:23:30 fw php-fpm[26595]: /rc.newwanip: Gateway, none 'available' for inet, use the first one configured. 'GW'
Feb 22 20:23:30 fw php-fpm[26595]: /rc.newwanip: Gateway, NONE AVAILABLE
Feb 22 20:23:30 fw php-fpm[26595]: /rc.newwanip: Resyncing OpenVPN instances for interface LAN.
Feb 22 20:23:30 fw php-fpm[26595]: /rc.newwanip: Creating rrd update script
Feb 22 20:23:32 fw php-fpm[50955]: /rc.newwanip: [squid] Installed but disabled. Not installing 'nat' rules.
Feb 22 20:23:32 fw php-fpm[26595]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 192.168.10.199 ->  192.168.10.199 - Restarting packages.
Feb 22 20:23:32 fw check_reload_status[42021]: check_reload_status is starting.
Feb 22 20:23:32 fw check_reload_status[42021]: Reloading filter
Feb 22 20:23:33 fw php-fpm[50955]: /rc.newwanip: [squid] Installed but disabled. Not installing 'pfearly' rules.
Feb 22 20:23:33 fw check_reload_status[42021]: Could not connect to /var/run/php-fpm.socket
Feb 22 20:23:34 fw check_reload_status[42021]: Could not connect to /var/run/php-fpm.socket
Feb 22 20:23:35 fw check_reload_status[42021]: Could not connect to /var/run/php-fpm.socket
Feb 22 20:23:35 fw rc.php-fpm_restart[67273]: >>> Restarting php-fpm
Feb 22 20:23:35 fw check_reload_status[68452]: check_reload_status is starting.
Feb 22 20:23:40 fw php-fpm[68009]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'nat' rules.
Feb 22 20:23:41 fw php-fpm[68009]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'pfearly' rules.
[2.7.2-RELEASE][admin@fw.local.lan]/var/log/nginx: cat error.log 
[2.7.2-RELEASE][admin@fw.local.lan]/var/log/nginx: 

Do you think the adaptater which is well recongized may cause that issue ?

[stephenw10]

What is logged in the system log when it fails?

USB Ethernet is generally not recommended though.