Pfsense 8200 capable config?

[hispeed]

I want to use the Netgate 8200 direct attached to my ISP and with a 10 Gbic module. They recommend using a Mikrotik router instead. They also do "support" if you want to use your own device.

So this is the Mikrotik configuration. I think it shouldn't be a problem for Pfsense?

/interface bridge
add name=lan
add name=wan protocol-mode=none
/interface ethernet
set [ find default-name=sfp28-2 ] fec-mode=fec91
set [ find default-name=sfp-sfpplus1 ] auto-negotiation=yes
/ip pool
add name=dhcp_pool0 ranges=192.168.100.2-192.168.100.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=lan name=dhcp1
/ipv6 dhcp-server
add address-pool=v6pool interface=lan name=v6server
/interface bridge port
add bridge=lan interface=sfp28-1
add bridge=wan interface=sfp28-2
add bridge=lan interface=sfp-sfpplus1
add bridge=lan interface=sfp-sfpplus2
add bridge=lan interface=sfp-sfpplus3
add bridge=lan interface=sfp-sfpplus4
add bridge=lan interface=sfp-sfpplus5
add bridge=lan interface=sfp-sfpplus6
add bridge=lan interface=sfp-sfpplus7
add bridge=lan interface=sfp-sfpplus8
add bridge=lan interface=sfp-sfpplus9
add bridge=lan interface=sfp-sfpplus10
add bridge=lan interface=sfp-sfpplus11
add bridge=lan interface=sfp-sfpplus12
add bridge=lan interface=ether1
/ipv6 settings
set accept-router-advertisements=yes
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether1 network=192.168.88.0
add address=192.168.100.1/24 interface=lan network=192.168.100.0
/ip dhcp-client
add disabled=no interface=wan
/ip dhcp-server network
add address=192.168.100.0/24 gateway=192.168.100.1
/ip firewall filter
add action=accept chain=input in-interface=ether1
add action=fasttrack-connection chain=forward
/ip firewall nat
add action=masquerade chain=srcnat out-interface=wan
/ip service
set telnet address=192.168.100.0/24
set ftp address=192.168.100.0/24
set www address=192.168.100.0/24
set ssh address=192.168.100.0/24
set www-ssl address=192.168.100.0/24 disabled=no
set api address=192.168.100.0/24
set winbox address=192.168.100.0/24
set api-ssl address=192.168.100.0/24
/ipv6 address
add from-pool=v6pool interface=lan
/ipv6 dhcp-client
add add-default-route=yes interface=wan pool-name=v6pool pool-prefix-length=56 request=address,prefix
/ipv6 firewall filter
add action=accept chain=forward connection-state=established,related in-interface=wan out-interface=lan
add action=drop chain=forward in-interface=wan out-interface=lan
/ipv6 nd
set [ find default=yes ] interface=lan managed-address-configuration=yes mtu=1500 other-configuration=yes
/system clock
set time-zone-name=Europe/Zurich
/system package update
set channel=testing
/system resource irq rps
set ether1 disabled=yes