Problem installing net gate 4200
-
@mcury lol I'll try it!
-
-
@SteveITS I don't have an area for computer to enter gateway address? And do I add dns servers?
-
@SteveITS for configure ipv4 on computer I can add ip address, subnet and router
-
@bigbob said in Problem installing net gate 4200:
I don't have an area for computer to enter gateway address? And do I add dns servers?
your connection to pfsense will work without DNS and gateway, but you won't have internet access.
for now, let those aside then, once you restore your connection to pfsense, we will look at it. -
@mcury I'm looking under net gate now. It says ipv4 configured using dhcp, ip address 192.168.1.100
Subnet. 255.255.255.0
Dns servers: 192.168.1.1 -
@bigbob said in Problem installing net gate 4200:
@mcury I'm looking under net gate now. It says ipv4 configured using dhcp, ip address 192.168.1.100
Subnet. 255.255.255.0
Dns servers: 192.168.1.1ok, that is WAN interface.
which means that you will need to change LAN's interface IP address to 192.168.101/24.So, just change LAN as already been discussed, change your computer's IP address as well, and try to open 192.168.1.101 after that in your browser.
-
@mcury the connection I'm looking at says usb10/100/1000 LAN and then all those numbers I posted above.
-
-
@bigbob said in Problem installing net gate 4200:
@bigbob the connection I'm looking at says usb10/100/1000 LAN and then all those numbers I posted above. @SteveITS also says domain is home.arpa
When you buy a SG-4200, or any other appliance from Netgate, you get a TAC Lite plan, which includes zero to ping support.
https://www.netgate.com/support
I suggest you check that, they are very good and the support is amazing.
