Alias in the local network field Phase 2

frog

Hello is it possible to create an ip alias with all the local VLANS in and then apply that to a single Phase 2 setup. Or do I have to create a Phase 2 for each subnet

Thanks
Chris

viragomann

@frog
Not that I know. But if your subnets are successive you can state a larger subnet, which includes all or multiple at least.

E.g. your subnets are
10.66.20.0/24
10.66.21.0/24
...
10.66.29.0/24
10.66.30.0/24

So set you local network to 10.66.25.0/20, which includes 10.66.16.0 - 10.66.31.255.

However, you will also have to configure the remote site accordingly.