2.8.2_1 blazer_usb, nutdrv_qx
This topic was forked from NUT Package (2.8.1 and above)
dennypage
-
That wasn't your fault. I have tried the usbhid driver again.
I have now connected the UPS to an APU2 with pfSense.
pfSense and packages are up to date and the blazer_usb works here.In a further step, I tried it again with nutdrv_qx. Now I get values with the following parameters:
protocol="q1" subdriver="phoenix" productid=0005 vendorid=06da override.battery.packs = 18 override.battery.voltage.nominal = 36 battery_voltage_reports_one_packThey are partially correct, but the battery voltage always remains at approx. 2.18 V and battery charge is at 0%.
Any suggestions to solve this?
-
@LanterIT Do you have DDD output available?
-
here you go:
/usr/local/libexec/nut/nutdrv_qx -a ABB -DDD Network UPS Tools - Generic Q* USB/Serial driver 0.36 (2.8.1.1) USB communication driver (libusb 1.0) 0.46 0.000000 [D1] Network UPS Tools version 2.8.1.1 (release/snapshot of 2.8.1.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --with-freeipmi --without-ipmi --with-doc=no --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0 0.000239 [D1] debug level is '3' 0.001790 [D1] Succeeded to become_user(nut): now UID=316 GID=316 0.001959 [D1] upsdrv_initups... 0.003102 [D2] Checking device 1 of 1 (06DA/0005) 0.090800 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.119843 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.148917 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.149057 [D2] - VendorID: 06da 0.149093 [D2] - ProductID: 0005 0.149120 [D2] - Manufacturer: PPC 0.149136 [D2] - Product: USB UPS 0.149170 [D2] - Serial Number: unknown 0.149200 [D2] - Bus: 000 0.149214 [D2] - Bus Port: 003 0.149227 [D2] - Device: 002 0.149255 [D2] - Device release number: 0001 0.149279 [D2] Trying to match device 0.149312 [D3] match_function_regex: matching a device... 0.149448 [D2] Device matches 0.149486 [D2] Reading configuration descriptor 1 of 1 0.149748 [D3] libusb_kernel_driver_active() returned 0: Success 0.149806 [D2] Claimed interface 0 successfully 0.149831 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0) 0.149962 [D2] Skipping protocol Voltronic 0.08 0.149980 [D2] Skipping protocol Voltronic-QS 0.09 0.149997 [D2] Skipping protocol Voltronic-QS-Hex 0.10 0.150014 [D2] Skipping protocol Mustek 0.08 0.150035 [D2] Skipping protocol Megatec/old 0.08 0.150051 [D2] Skipping protocol BestUPS 0.07 0.150082 [D2] Skipping protocol Mecer 0.08 0.150114 [D2] Skipping protocol Megatec 0.07 0.150130 [D2] Skipping protocol Zinto 0.07 0.150147 [D2] Skipping protocol Masterguard 0.02 0.150187 [D2] Skipping protocol Hunnox 0.02 0.150220 [D2] Skipping protocol Ablerex 0.01 1.185604 [D3] flush: Timeout (-7) 1.192724 [D3] send: Q1 1.427098 [D3] read: (227.2 227.2 229.9 046 49.9 2.18 28.0 00000001 1.427321 Using protocol: Q1 0.08 1.427385 [D1] upsdrv_initinfo... 2.515288 [D3] flush: Timeout (-7) 2.521959 [D3] send: Q1 2.755117 [D3] read: (227.2 227.2 229.9 046 49.9 2.18 28.0 00000001 2.755842 No values for battery high/low voltages 2.755891 Using 'guesstimation' (low: 31.200000, high: 39.000000)! 2.755951 Battery runtime will not be calculated (runtimecal not set) 2.756047 [D1] upsdrv_updateinfo... 2.756070 [D1] Quick update... 3.831254 [D3] flush: Timeout (-7) 3.837639 [D3] send: Q1 4.074734 [D3] read: (227.0 227.0 230.4 046 49.9 2.18 28.0 00000001 4.075893 [D2] dstate_init: sock /var/db/nut/nutdrv_qx-ABB open on fd 8 4.076108 Running as foreground process, not saving a PID file 4.076162 [D1] Driver initialization completed, beginning regular infinite loop 4.076181 upsnotify: failed to notify about state 2: no notification tech defined, will not spam more about it 4.076203 [D1] upsdrv_updateinfo... 4.076223 [D1] Quick update... 5.150175 [D3] flush: Timeout (-7) 5.156660 [D3] send: Q1 5.394689 [D3] read: (227.2 227.2 230.4 046 49.9 2.18 28.0 00000001 5.394879 sock_connect: enabling asynchronous mode (auto) 5.395089 [D3] new connection on fd 9 5.395169 [D2] send_to_one: sending SETINFO battery.charge "0" 5.395201 [D2] send_to_one: sending SETINFO battery.packs "18" 5.395259 [D2] send_to_one: sending SETFLAGS battery.packs 5.395284 [D2] send_to_one: sending SETINFO battery.voltage "2.18" 5.395340 [D2] send_to_one: sending SETINFO battery.voltage.high "39.00" 5.395364 [D2] send_to_one: sending SETINFO battery.voltage.low "31.20" 5.395389 [D2] send_to_one: sending SETINFO battery.voltage.nominal "36" 5.395444 [D2] send_to_one: sending SETFLAGS battery.voltage.nominal 5.395499 [D2] send_to_one: sending SETINFO device.type "ups" 5.395523 [D2] send_to_one: sending SETINFO driver.debug "3" 5.395580 [D2] send_to_one: sending SETFLAGS driver.debug RW NUMBER 5.395604 [D2] send_to_one: sending SETINFO driver.flag.allow_killpower "0" 5.395630 [D2] send_to_one: sending SETFLAGS driver.flag.allow_killpower RW NUMBER 5.395679 [D2] send_to_one: sending SETINFO driver.flag.battery_voltage_reports_one_pack "enabled" 5.395729 [D2] send_to_one: sending SETINFO driver.name "nutdrv_qx" 5.395753 [D2] send_to_one: sending SETINFO driver.parameter.override.battery.packs "18" 5.395778 [D2] send_to_one: sending SETINFO driver.parameter.override.battery.voltage.nominal "36" 5.395833 [D2] send_to_one: sending SETINFO driver.parameter.pollfreq "30" 5.395857 [D2] send_to_one: sending SETINFO driver.parameter.pollinterval "2" 5.395906 [D2] send_to_one: sending SETINFO driver.parameter.port "auto" 5.395930 [D2] send_to_one: sending SETINFO driver.parameter.productid "0005" 5.395954 [D2] send_to_one: sending SETINFO driver.parameter.protocol "q1" 5.395978 [D2] send_to_one: sending SETINFO driver.parameter.subdriver "phoenix" 5.396001 [D2] send_to_one: sending SETINFO driver.parameter.synchronous "auto" 5.396025 [D2] send_to_one: sending SETINFO driver.parameter.vendorid "06da" 5.396056 [D2] send_to_one: sending SETINFO driver.state "quiet" 5.396080 [D2] send_to_one: sending SETINFO driver.version "2.8.1.1" 5.396103 [D2] send_to_one: sending SETINFO driver.version.data "Q1 0.08" 5.396157 [D2] send_to_one: sending SETINFO driver.version.internal "0.36" 5.396182 [D2] send_to_one: sending SETINFO driver.version.usb "libusb-1.0.0 (API: 0x1000102)" 5.396206 [D2] send_to_one: sending SETINFO input.frequency "49.9" 5.396230 [D2] send_to_one: sending SETINFO input.voltage "227.2" 5.396254 [D2] send_to_one: sending SETINFO input.voltage.fault "227.2" 5.396277 [D2] send_to_one: sending SETINFO output.voltage "229.9" 5.396325 [D2] send_to_one: sending SETINFO ups.beeper.status "enabled" 5.396349 [D2] send_to_one: sending SETINFO ups.delay.shutdown "30" 5.396374 [D2] send_to_one: sending ADDRANGE ups.delay.shutdown 12 600 5.396400 [D2] send_to_one: sending SETFLAGS ups.delay.shutdown RW NUMBER 5.396423 [D2] send_to_one: sending SETINFO ups.delay.start "180" 5.396446 [D2] send_to_one: sending ADDRANGE ups.delay.start 0 599940 5.396496 [D2] send_to_one: sending SETFLAGS ups.delay.start RW NUMBER 5.396520 [D2] send_to_one: sending SETINFO ups.load "46" 5.396544 [D2] send_to_one: sending SETINFO ups.productid "0005" 5.396568 [D2] send_to_one: sending SETINFO ups.status "OL" 5.396591 [D2] send_to_one: sending SETINFO ups.temperature "28.0" 5.396640 [D2] send_to_one: sending SETINFO ups.type "online" 5.396688 [D2] send_to_one: sending SETINFO ups.vendorid "06da" 5.396732 [D2] send_to_one: sending ADDCMD beeper.toggle 5.396767 [D2] send_to_one: sending ADDCMD driver.killpower 5.396790 [D2] send_to_one: sending ADDCMD driver.reload 5.396829 [D2] send_to_one: sending ADDCMD driver.reload-or-error 5.396868 [D2] send_to_one: sending ADDCMD driver.reload-or-exit 5.396892 [D2] send_to_one: sending ADDCMD load.off 5.396940 [D2] send_to_one: sending ADDCMD load.on 5.396963 [D2] send_to_one: sending ADDCMD shutdown.return 5.396985 [D2] send_to_one: sending ADDCMD shutdown.stayoff 5.397008 [D2] send_to_one: sending ADDCMD shutdown.stop 5.397036 [D2] send_to_one: sending ADDCMD test.battery.start 5.397060 [D2] send_to_one: sending ADDCMD test.battery.start.deep 5.397099 [D2] send_to_one: sending ADDCMD test.battery.start.quick 5.397139 [D2] send_to_one: sending ADDCMD test.battery.stop 5.397192 [D2] send_to_one: sending DATAOK 5.397215 [D2] send_to_one: sending DUMPDONE 6.077221 [D1] upsdrv_updateinfo... 6.077350 [D1] Quick update... 7.150342 [D3] flush: Timeout (-7) 7.156732 [D3] send: Q1 7.395152 [D3] read: (227.0 227.0 230.4 048 49.9 2.18 27.9 00000001 8.092753 [D1] upsdrv_updateinfo... 8.092830 [D1] Quick update... 9.166248 [D3] flush: Timeout (-7) 9.172723 [D3] send: Q1 9.410777 [D3] read: (226.7 226.7 230.6 047 49.9 2.18 27.9 00000001 10.093141 [D1] upsdrv_updateinfo... 10.093246 [D1] Quick update... 11.166278 [D3] flush: Timeout (-7) 11.172787 [D3] send: Q1 11.410780 [D3] read: (227.2 227.2 229.7 046 49.9 2.18 28.0 00000001 12.094144 [D1] upsdrv_updateinfo... 12.094240 [D1] Quick update... 13.166398 [D3] flush: Timeout (-7) 13.172831 [D3] send: Q1 13.410816 [D3] read: (227.0 227.0 229.9 046 49.9 2.18 27.9 00000001 14.095131 [D1] upsdrv_updateinfo... 14.095203 [D1] Quick update... 15.166410 [D3] flush: Timeout (-7) 15.172846 [D3] send: Q1 15.410921 [D3] read: (227.2 227.2 230.1 046 49.9 2.18 28.0 00000001 16.109145 [D1] upsdrv_updateinfo... 16.109229 [D1] Quick update... 16.828198 [D1] set_exit_flag: raising exit flag due to signal 2 16.830334 [D3] flush: Other error (-99) 16.836886 [D3] send: Q1 17.074899 [D3] read: (226.5 226.5 230.4 045 49.9 2.18 28.0 00000001 18.110242 Signal 2: exitingThanks in advance
-
@LanterIT said in NUT Package (2.8.1 and above):
(227.2 227.2 229.7 046 49.9 2.18 28.0 00000001
These look about right, yes?
Input voltage: 227.2
Output voltage: 229.7
UPS load: 046
Input frequency: 49.9
Battery voltage: 2.18 (single pack presumably)
UPS temperature: 28.0
Status: 00000001 (beeper enabled) -
yes, except battery voltage
-
@LanterIT said in NUT Package (2.8.1 and above):
I have now connected the UPS to an APU2 with pfSense.
pfSense and packages are up to date and the blazer_usb works here.I missed this... you are saying that the blazer_usb driver worked?
If so, did you capture a DDD output from it as well?
-
now the output from blazer_usb:
/usr/local/libexec/nut/blazer_usb -DDD -a ABB Network UPS Tools - Megatec/Q1 protocol USB driver 0.17 (2.8.1.1) 0.000001 [D3] do_global_args: var='user' val='root' 0.000076 [D1] testval_reloadable: setting 'user' exists and differs: new value 'root' vs. 'nut' 0.000108 [D1] Overriding previously specified user 'nut' with 'root' specified in global section 0.000163 [D3] main_arg: var='driver' val='blazer_usb' 0.000202 [D3] main_arg: var='port' val='auto' 0.000259 [D3] main_arg: var='protocol' val='megatec' 0.000343 [D3] main_arg: var='subdriver' val='phoenix' 0.000417 [D3] main_arg: var='productid' val='0005' 0.000473 [D3] main_arg: var='vendorid' val='06da' 0.000534 [D3] main_arg: var='synchronous' val='yes' 0.000565 [D1] testval_reloadable: setting 'synchronous' exists and differs: new value 'yes' vs. 'auto' 0.000639 [D1] Network UPS Tools version 2.8.1.1 (release/snapshot of 2.8.1.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --with-freeipmi --without-ipmi --with-doc=no --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0 0.000694 [D1] debug level is '3' 0.002450 [D1] Succeeded to become_user(root): now UID=0 GID=0 0.003833 [D2] Checking device 1 of 6 (0000/0000) 0.004455 [D1] nut_libusb_open: invalid libusb bus number 0 0.004590 [D2] - VendorID: 0000 0.004618 [D2] - ProductID: 0000 0.004642 [D2] - Manufacturer: AMD 0.004666 [D2] - Product: EHCI root HUB 0.004690 [D2] - Serial Number: unknown 0.004714 [D2] - Bus: 002 0.004738 [D2] - Bus Port: unknown 0.004760 [D2] - Device: 001 0.004784 [D2] - Device release number: 0100 0.004808 [D2] Trying to match device 0.004831 [D3] match_function_regex: matching a device... 0.004878 [D2] match_function_regex: failed match of VendorID: 0 0.004905 [D2] Device does not match - skipping 0.005006 [D2] Checking device 2 of 6 (0000/0000) 0.005151 [D1] nut_libusb_open: invalid libusb bus number 0 0.005239 [D2] - VendorID: 0000 0.005267 [D2] - ProductID: 0000 0.005290 [D2] - Manufacturer: AMD 0.005313 [D2] - Product: XHCI root HUB 0.005335 [D2] - Serial Number: unknown 0.005360 [D2] - Bus: 000 0.005382 [D2] - Bus Port: unknown 0.005405 [D2] - Device: 001 0.005428 [D2] - Device release number: 0100 0.005450 [D2] Trying to match device 0.005474 [D3] match_function_regex: matching a device... 0.005506 [D2] match_function_regex: failed match of VendorID: 0 0.005530 [D2] Device does not match - skipping 0.005605 [D2] Checking device 3 of 6 (0000/0000) 0.005745 [D1] nut_libusb_open: invalid libusb bus number 0 0.005827 [D2] - VendorID: 0000 0.005852 [D2] - ProductID: 0000 0.005876 [D2] - Manufacturer: AMD 0.005898 [D2] - Product: EHCI root HUB 0.005921 [D2] - Serial Number: unknown 0.005944 [D2] - Bus: 001 0.005976 [D2] - Bus Port: unknown 0.006000 [D2] - Device: 001 0.006023 [D2] - Device release number: 0100 0.006047 [D2] Trying to match device 0.006075 [D3] match_function_regex: matching a device... 0.006107 [D2] match_function_regex: failed match of VendorID: 0 0.006134 [D2] Device does not match - skipping 0.006213 [D2] Checking device 4 of 6 (06DA/0005) 0.092906 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.121657 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.151015 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.151112 [D2] - VendorID: 06da 0.151139 [D2] - ProductID: 0005 0.151163 [D2] - Manufacturer: PPC 0.151188 [D2] - Product: USB UPS 0.151212 [D2] - Serial Number: unknown 0.151235 [D2] - Bus: 000 0.151258 [D2] - Bus Port: 003 0.151280 [D2] - Device: 002 0.151304 [D2] - Device release number: 0001 0.151328 [D2] Trying to match device 0.151352 [D3] match_function_regex: matching a device... 0.151427 [D2] Device matches 0.151453 [D2] Reading configuration descriptor 1 of 1 0.151783 [D3] libusb_kernel_driver_active() returned 0: Success 0.151828 [D2] Claimed interface 0 successfully 0.151863 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0) 0.152037 Please note that this driver is deprecated and will not receive new development. If it works for managing your devices - fine, but if you are running it to try setting up a new device, please consider the newer nutdrv_qx instead, which should handle all 'Qx' protocol variants for NUT. (Please also report if your device works with this driver, but nutdrv_qx would not actually support it with any subdriver!) 0.152075 [D2] Trying megatec protocol... 1.252539 [D3] flush: Timeout 1.259834 [D3] send: Q1 1.494125 [D3] read: (225.7 225.7 230.1 047 50.0 2.18 28.0 00000001 1.494469 [D2] Status read in 1 tries 1.494497 Supported UPS detected with megatec protocol 2.631643 [D3] flush: Timeout 2.639009 [D3] send: F 2.749987 [D3] read: #230.0 004 036.0 50.0 2.750183 [D2] Ratings read in 1 tries 3.959609 [D3] flush: Timeout 3.966907 [D3] send: I 4.038094 [D3] read: 4.038159 [D2] blazer_vendor: short reply 4.038176 [D1] Vendor information read 1 failed 4.236860 [D3] send: I 4.310070 [D3] read: 4.310234 [D2] blazer_vendor: short reply 4.310250 [D1] Vendor information read 2 failed 4.509135 [D3] send: I 4.582089 [D3] read: 4.582168 [D2] blazer_vendor: short reply 4.582189 [D1] Vendor information read 3 failed 4.582204 Vendor information unavailable 4.582219 No values provided for battery high/low voltages in ups.conf 4.582309 Using 'guesstimation' (low: 31.200000, high: 39.000000)! 4.582330 Battery runtime will not be calculated (runtimecal not set) 4.780875 [D3] send: Q1 5.014126 [D3] read: (225.7 225.7 230.4 047 50.0 2.18 28.0 00000001 5.015069 [D2] dstate_init: sock /var/db/nut/blazer_usb-ABB open on fd 8 5.015203 [D1] Group and/or user account for this driver was customized ('root:nut') compared to built-in defaults. Fixing socket '/var/db/nut/blazer_usb-ABB' ownership/access. 5.015254 [D1] WARNING: opening socket file for stat/chown failed (45), which is rather typical for Unix socket handling: Operation not supported 5.015497 [D1] Group access for this driver successfully fixed (using file name based methods) 5.015555 Running as foreground process, not saving a PID file 5.015634 [D1] Driver initialization completed, beginning regular infinite loop 5.015682 upsnotify: failed to notify about state 2: no notification tech defined, will not spam more about it 6.151653 [D3] flush: Timeout 6.158991 [D3] send: Q1 6.390178 [D3] read: (226.1 226.1 229.5 045 50.0 2.18 28.0 00000001 6.390467 sock_connect: keeping default synchronous mode 6.390641 [D3] new connection on fd 9 6.390730 [D2] send_to_one: sending SETINFO battery.charge "100" 6.390777 [D2] send_to_one: sending SETINFO battery.voltage "39.24" 6.390829 [D2] send_to_one: sending SETINFO battery.voltage.high "39.00" 6.390856 [D2] send_to_one: sending SETINFO battery.voltage.low "31.20" 6.390880 [D2] send_to_one: sending SETINFO battery.voltage.nominal "36.0" 6.390936 [D2] send_to_one: sending SETINFO device.type "ups" 6.390960 [D2] send_to_one: sending SETINFO driver.debug "3" 6.390991 [D2] send_to_one: sending SETFLAGS driver.debug RW NUMBER 6.391015 [D2] send_to_one: sending SETINFO driver.flag.allow_killpower "0" 6.391041 [D2] send_to_one: sending SETFLAGS driver.flag.allow_killpower RW NUMBER 6.391064 [D2] send_to_one: sending SETINFO driver.name "blazer_usb" 6.391114 [D2] send_to_one: sending SETINFO driver.parameter.pollinterval "2" 6.391138 [D2] send_to_one: sending SETINFO driver.parameter.port "auto" 6.391162 [D2] send_to_one: sending SETINFO driver.parameter.productid "0005" 6.391186 [D2] send_to_one: sending SETINFO driver.parameter.protocol "megatec" 6.391210 [D2] send_to_one: sending SETINFO driver.parameter.subdriver "phoenix" 6.391234 [D2] send_to_one: sending SETINFO driver.parameter.synchronous "yes" 6.391257 [D2] send_to_one: sending SETINFO driver.parameter.vendorid "06da" 6.391282 [D2] send_to_one: sending SETINFO driver.state "quiet" 6.391305 [D2] send_to_one: sending SETINFO driver.version "2.8.1.1" 6.391328 [D2] send_to_one: sending SETINFO driver.version.internal "0.17" 6.391351 [D2] send_to_one: sending SETINFO driver.version.usb "libusb-1.0.0 (API: 0x1000102)" 6.391375 [D2] send_to_one: sending SETINFO input.current.nominal "4.0" 6.391419 [D2] send_to_one: sending SETINFO input.frequency "50.0" 6.391479 [D2] send_to_one: sending SETINFO input.frequency.nominal "50" 6.391503 [D2] send_to_one: sending SETINFO input.voltage "226.1" 6.391527 [D2] send_to_one: sending SETINFO input.voltage.fault "226.1" 6.391583 [D2] send_to_one: sending SETINFO input.voltage.nominal "230" 6.391636 [D2] send_to_one: sending SETINFO output.voltage "229.5" 6.391660 [D2] send_to_one: sending SETINFO ups.beeper.status "enabled" 6.391683 [D2] send_to_one: sending SETINFO ups.delay.shutdown "30" 6.391706 [D2] send_to_one: sending SETINFO ups.delay.start "180" 6.391728 [D2] send_to_one: sending SETINFO ups.load "45" 6.391752 [D2] send_to_one: sending SETINFO ups.productid "0005" 6.391793 [D2] send_to_one: sending SETINFO ups.status "OL" 6.391829 [D2] send_to_one: sending SETINFO ups.temperature "28.0" 6.391852 [D2] send_to_one: sending SETINFO ups.type "online" 6.391875 [D2] send_to_one: sending SETINFO ups.vendorid "06da" 6.391898 [D2] send_to_one: sending ADDCMD beeper.toggle 6.391926 [D2] send_to_one: sending ADDCMD driver.killpower 6.391949 [D2] send_to_one: sending ADDCMD driver.reload 6.392006 [D2] send_to_one: sending ADDCMD driver.reload-or-error 6.392030 [D2] send_to_one: sending ADDCMD driver.reload-or-exit 6.392053 [D2] send_to_one: sending ADDCMD load.off 6.392080 [D2] send_to_one: sending ADDCMD load.on 6.392102 [D2] send_to_one: sending ADDCMD shutdown.return 6.392130 [D2] send_to_one: sending ADDCMD shutdown.stayoff 6.392170 [D2] send_to_one: sending ADDCMD shutdown.stop 6.392208 [D2] send_to_one: sending ADDCMD test.battery.start 6.392236 [D2] send_to_one: sending ADDCMD test.battery.start.deep 6.392258 [D2] send_to_one: sending ADDCMD test.battery.start.quick 6.392282 [D2] send_to_one: sending ADDCMD test.battery.stop 6.392304 [D2] send_to_one: sending DATAOK 6.392362 [D2] send_to_one: sending DUMPDONE 8.114274 [D3] flush: Timeout 8.120763 [D3] send: Q1 8.357810 [D3] read: (225.9 225.9 229.7 046 50.0 2.18 28.0 00000001 10.113421 [D3] flush: Timeout 10.119933 [D3] send: Q1 10.350004 [D3] read: (225.9 225.9 229.9 046 49.9 2.18 28.0 00000001 12.148701 [D3] flush: Timeout 12.156105 [D3] send: Q1 12.390347 [D3] read: (226.1 225.9 229.5 046 49.9 2.18 28.0 00000001 14.161443 [D3] flush: Timeout 14.167937 [D3] send: Q1 14.406015 [D3] read: (225.9 225.9 229.5 045 50.0 2.18 28.0 00000001 16.162491 [D3] flush: Timeout 16.169017 [D3] send: Q1 16.406011 [D3] read: (226.1 226.1 229.7 046 49.9 2.18 28.0 00000001 -
@LanterIT I believe we are making progress.
The QX "q1" protocol is the same as the "megatec" protocol except that it removes vendor information 'I' (manufacturer, model, firmware) and ratings 'F' (nominal input voltage & current, battery voltage and frequency). The UPS responded to ratings in the blazer_usb driver, but did not respond to vendor information.
The other two QX protocol drivers that do not require 'I' are "hunnox" and "zinto". They both do 'F'. They also both do 'FW', which replaces 'I' in these drivers. I'm going to set the "hunnox" driver aside as it has some other differences from "megatec" and "zinto" that I do not understand.
I have two configurations that I recommend testing. The first is the "zinto" protocol, and what we want to know is if the UPS responds to 'FW'. This is the zinto configuration:
vendorid=06da productid=0005 subdriver = "phoenix" protocol = "zinto"The second is a "megatec" protocol, with the 'I' (vendor information) disabled. This is the "megatec" configuration:
vendorid=06da productid=0005 subdriver = "phoenix" protocol = "megatec" novendor -
zinto does not work. here the output:
/usr/local/libexec/nut/nutdrv_qx -DDD -a ABB Network UPS Tools - Generic Q* USB/Serial driver 0.36 (2.8.1.1) USB communication driver (libusb 1.0) 0.46 0.000000 [D3] do_global_args: var='user' val='root' 0.000053 [D1] testval_reloadable: setting 'user' exists and differs: new value 'root' vs. 'nut' 0.000100 [D1] Overriding previously specified user 'nut' with 'root' specified in global section 0.000161 [D3] main_arg: var='driver' val='nutdrv_qx' 0.000184 [D3] main_arg: var='port' val='auto' 0.000218 [D3] main_arg: var='vendorid' val='06da' 0.000295 [D3] main_arg: var='productid' val='0005' 0.000333 [D3] main_arg: var='subdriver' val='phoenix' 0.000368 [D3] main_arg: var='protocol' val='zinto' 0.000435 [D1] Network UPS Tools version 2.8.1.1 (release/snapshot of 2.8.1.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --with-freeipmi --without-ipmi --with-doc=no --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0 0.000468 [D1] debug level is '3' 0.001964 [D1] Succeeded to become_user(root): now UID=0 GID=0 0.002063 [D1] upsdrv_initups... 0.003081 [D2] Checking device 1 of 6 (0000/0000) 0.003637 [D1] nut_libusb_open: invalid libusb bus number 0 0.003723 [D2] - VendorID: 0000 0.003767 [D2] - ProductID: 0000 0.003781 [D2] - Manufacturer: AMD 0.003823 [D2] - Product: XHCI root HUB 0.003837 [D2] - Serial Number: unknown 0.003851 [D2] - Bus: 000 0.003864 [D2] - Bus Port: unknown 0.003879 [D2] - Device: 001 0.003893 [D2] - Device release number: 0100 0.003907 [D2] Trying to match device 0.003922 [D3] match_function_regex: matching a device... 0.003978 [D2] match_function_regex: failed match of VendorID: 0 0.004021 [D2] Device does not match - skipping 0.004107 [D2] Checking device 2 of 6 (0000/0000) 0.004193 [D1] nut_libusb_open: invalid libusb bus number 0 0.004270 [D2] - VendorID: 0000 0.004286 [D2] - ProductID: 0000 0.004300 [D2] - Manufacturer: AMD 0.004330 [D2] - Product: EHCI root HUB 0.004358 [D2] - Serial Number: unknown 0.004372 [D2] - Bus: 001 0.004386 [D2] - Bus Port: unknown 0.004400 [D2] - Device: 001 0.004414 [D2] - Device release number: 0100 0.004428 [D2] Trying to match device 0.004467 [D3] match_function_regex: matching a device... 0.004486 [D2] match_function_regex: failed match of VendorID: 0 0.004501 [D2] Device does not match - skipping 0.004546 [D2] Checking device 3 of 6 (0000/0000) 0.004704 [D1] nut_libusb_open: invalid libusb bus number 0 0.004752 [D2] - VendorID: 0000 0.004768 [D2] - ProductID: 0000 0.004812 [D2] - Manufacturer: AMD 0.004826 [D2] - Product: EHCI root HUB 0.004840 [D2] - Serial Number: unknown 0.004854 [D2] - Bus: 002 0.004898 [D2] - Bus Port: unknown 0.004912 [D2] - Device: 001 0.004926 [D2] - Device release number: 0100 0.004940 [D2] Trying to match device 0.004954 [D3] match_function_regex: matching a device... 0.004991 [D2] match_function_regex: failed match of VendorID: 0 0.005018 [D2] Device does not match - skipping 0.005093 [D2] Checking device 4 of 6 (06DA/0005) 0.092424 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.121448 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.150362 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.150445 [D2] - VendorID: 06da 0.150461 [D2] - ProductID: 0005 0.150507 [D2] - Manufacturer: PPC 0.150522 [D2] - Product: USB UPS 0.150536 [D2] - Serial Number: unknown 0.150550 [D2] - Bus: 000 0.150564 [D2] - Bus Port: 003 0.150578 [D2] - Device: 002 0.150592 [D2] - Device release number: 0001 0.150628 [D2] Trying to match device 0.150657 [D3] match_function_regex: matching a device... 0.150749 [D2] Device matches 0.150779 [D2] Reading configuration descriptor 1 of 1 0.150994 [D3] libusb_kernel_driver_active() returned 0: Success 0.151021 [D2] Claimed interface 0 successfully 0.151045 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0) 0.151156 [D2] Skipping protocol Voltronic 0.08 0.151175 [D2] Skipping protocol Voltronic-QS 0.09 0.151216 [D2] Skipping protocol Voltronic-QS-Hex 0.10 0.151233 [D2] Skipping protocol Mustek 0.08 0.151249 [D2] Skipping protocol Megatec/old 0.08 0.151264 [D2] Skipping protocol BestUPS 0.07 0.151311 [D2] Skipping protocol Mecer 0.08 0.151327 [D2] Skipping protocol Megatec 0.07 1.167042 [D3] flush: Timeout (-7) 1.173459 [D3] send: Q1 1.404486 [D3] read: (227.2 227.2 230.8 047 49.9 2.17 28.0 00000001 2.484000 [D3] flush: Timeout (-7) 2.490438 [D3] send: FW? 2.572673 [D3] read: 05732-0300 2.572822 [D2] qx_process_answer: short reply (ups.firmware) 2.771489 [D3] send: Q1 3.004697 [D3] read: (227.4 227.4 229.7 047 49.9 2.17 28.1 00000001 4.125952 [D3] flush: Timeout (-7) 4.132437 [D3] send: FW? 4.212518 [D3] read: 05732-0300 4.212555 [D2] qx_process_answer: short reply (ups.firmware) 4.411508 [D3] send: Q1 4.644529 [D3] read: (227.6 227.6 229.7 047 49.9 2.17 28.1 00000001 5.756031 [D3] flush: Timeout (-7) 5.762515 [D3] send: FW? 5.844578 [D3] read: 05732-0300 5.844628 [D2] qx_process_answer: short reply (ups.firmware) 5.844696 [D2] Skipping protocol Masterguard 0.02 5.844734 [D2] Skipping protocol Hunnox 0.02 5.844764 [D2] Skipping protocol Ablerex 0.01 5.844781 [D2] Skipping protocol Q1 0.08 5.844796 Device not supported! 5.844810 Device not supported! 5.844933 upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it -
"novendor" makes no difference. Still 0% battery charge and battery voltage now 2.17.
/usr/local/libexec/nut/nutdrv_qx -DDD -a ABB Network UPS Tools - Generic Q* USB/Serial driver 0.36 (2.8.1.1) USB communication driver (libusb 1.0) 0.46 0.000000 [D3] do_global_args: var='user' val='root' 0.000049 [D1] testval_reloadable: setting 'user' exists and differs: new value 'root' vs. 'nut' 0.000095 [D1] Overriding previously specified user 'nut' with 'root' specified in global section 0.000128 [D3] main_arg: var='driver' val='nutdrv_qx' 0.000151 [D3] main_arg: var='port' val='auto' 0.000185 [D3] main_arg: var='vendorid' val='06da' 0.000235 [D3] main_arg: var='productid' val='0005' 0.000274 [D3] main_arg: var='subdriver' val='phoenix' 0.000337 [D3] main_arg: var='protocol' val='megatec' 0.000371 [D3] main_arg: var='novendor' val='<null>' 0.000444 [D1] Network UPS Tools version 2.8.1.1 (release/snapshot of 2.8.1.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --with-freeipmi --without-ipmi --with-doc=no --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0 0.000478 [D1] debug level is '3' 0.001973 [D1] Succeeded to become_user(root): now UID=0 GID=0 0.002215 [D1] upsdrv_initups... 0.003367 [D2] Checking device 1 of 6 (0000/0000) 0.003987 [D1] nut_libusb_open: invalid libusb bus number 0 0.004098 [D2] - VendorID: 0000 0.004114 [D2] - ProductID: 0000 0.004127 [D2] - Manufacturer: AMD 0.004141 [D2] - Product: XHCI root HUB 0.004154 [D2] - Serial Number: unknown 0.004167 [D2] - Bus: 000 0.004181 [D2] - Bus Port: unknown 0.004193 [D2] - Device: 001 0.004206 [D2] - Device release number: 0100 0.004220 [D2] Trying to match device 0.004233 [D3] match_function_regex: matching a device... 0.004260 [D2] match_function_regex: failed match of VendorID: 0 0.004276 [D2] Device does not match - skipping 0.004331 [D2] Checking device 2 of 6 (0000/0000) 0.004446 [D1] nut_libusb_open: invalid libusb bus number 0 0.004496 [D2] - VendorID: 0000 0.004511 [D2] - ProductID: 0000 0.004525 [D2] - Manufacturer: AMD 0.004537 [D2] - Product: EHCI root HUB 0.004577 [D2] - Serial Number: unknown 0.004590 [D2] - Bus: 001 0.004603 [D2] - Bus Port: unknown 0.004616 [D2] - Device: 001 0.004629 [D2] - Device release number: 0100 0.004642 [D2] Trying to match device 0.004655 [D3] match_function_regex: matching a device... 0.004674 [D2] match_function_regex: failed match of VendorID: 0 0.004688 [D2] Device does not match - skipping 0.004787 [D2] Checking device 3 of 6 (0000/0000) 0.004875 [D1] nut_libusb_open: invalid libusb bus number 0 0.004923 [D2] - VendorID: 0000 0.004938 [D2] - ProductID: 0000 0.004951 [D2] - Manufacturer: AMD 0.004963 [D2] - Product: EHCI root HUB 0.004977 [D2] - Serial Number: unknown 0.004989 [D2] - Bus: 002 0.005005 [D2] - Bus Port: unknown 0.005021 [D2] - Device: 001 0.005061 [D2] - Device release number: 0100 0.005074 [D2] Trying to match device 0.005087 [D3] match_function_regex: matching a device... 0.005105 [D2] match_function_regex: failed match of VendorID: 0 0.005119 [D2] Device does not match - skipping 0.005163 [D2] Checking device 4 of 6 (06DA/0005) 0.091336 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.120336 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.149337 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.149383 [D2] - VendorID: 06da 0.149396 [D2] - ProductID: 0005 0.149426 [D2] - Manufacturer: PPC 0.149452 [D2] - Product: USB UPS 0.149464 [D2] - Serial Number: unknown 0.149477 [D2] - Bus: 000 0.149490 [D2] - Bus Port: 003 0.149502 [D2] - Device: 002 0.149515 [D2] - Device release number: 0001 0.149528 [D2] Trying to match device 0.149569 [D3] match_function_regex: matching a device... 0.149610 [D2] Device matches 0.149625 [D2] Reading configuration descriptor 1 of 1 0.149829 [D3] libusb_kernel_driver_active() returned 0: Success 0.149863 [D2] Claimed interface 0 successfully 0.149883 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0) 0.149953 [D2] Skipping protocol Voltronic 0.08 0.149970 [D2] Skipping protocol Voltronic-QS 0.09 0.150013 [D2] Skipping protocol Voltronic-QS-Hex 0.10 0.150027 [D2] Skipping protocol Mustek 0.08 0.150042 [D2] Skipping protocol Megatec/old 0.08 0.150057 [D2] Skipping protocol BestUPS 0.07 0.150072 [D2] Skipping protocol Mecer 0.08 1.134230 [D3] flush: Timeout (-7) 1.141703 [D3] send: Q1 1.371755 [D3] read: (226.3 226.3 230.4 051 49.9 2.17 28.1 00000001 1.372009 Using protocol: Megatec 0.07 1.372054 [D2] blazer_initups: skipping device.mfr 1.372090 [D2] blazer_initups: skipping device.model 1.372135 [D2] blazer_initups: skipping ups.firmware 1.372258 [D1] upsdrv_initinfo... 2.482213 [D3] flush: Timeout (-7) 2.489697 [D3] send: Q1 2.723945 [D3] read: (226.7 226.7 230.4 049 49.9 2.17 28.0 00000001 3.798980 [D3] flush: Timeout (-7) 3.805445 [D3] send: F 3.915503 [D3] read: #230.0 004 036.0 50.0 3.915997 No values for battery high/low voltages 3.916095 Using 'guesstimation' (low: 31.200000, high: 39.000000)! 3.916132 Autodetected 18 as number of battery packs [36/2.17] 3.916151 Battery runtime will not be calculated (runtimecal not set) 3.916266 [D1] upsdrv_updateinfo... 3.916287 [D1] Quick update... 5.098255 [D3] flush: Timeout (-7) 5.104794 [D3] send: Q1 5.339946 [D3] read: (226.3 226.3 230.1 049 49.9 2.17 28.0 00000001 5.341228 [D2] dstate_init: sock /var/db/nut/nutdrv_qx-ABB open on fd 8 5.341417 [D1] Group and/or user account for this driver was customized ('root:nut') compared to built-in defaults. Fixing socket '/var/db/nut/nutdrv_qx-ABB' ownership/access. 5.341470 [D1] WARNING: opening socket file for stat/chown failed (45), which is rather typical for Unix socket handling: Operation not supported 5.341615 [D1] Group access for this driver successfully fixed (using file name based methods) 5.341752 Running as foreground process, not saving a PID file 5.341847 [D1] Driver initialization completed, beginning regular infinite loop 5.341869 upsnotify: failed to notify about state 2: no notification tech defined, will not spam more about it 5.341891 [D1] upsdrv_updateinfo... 5.341911 [D1] Quick update... 6.417257 [D3] flush: Timeout (-7) 6.423736 [D3] send: Q1 6.659836 [D3] read: (226.3 226.3 229.9 049 49.9 2.17 28.1 00000001 6.660055 sock_connect: enabling asynchronous mode (auto) 6.660247 [D3] new connection on fd 9 6.660322 [D2] send_to_one: sending SETINFO battery.charge "0" 6.660389 [D2] send_to_one: sending SETINFO battery.voltage "2.17" 6.660416 [D2] send_to_one: sending SETINFO battery.voltage.high "39.00" 6.660465 [D2] send_to_one: sending SETINFO battery.voltage.low "31.20" 6.660489 [D2] send_to_one: sending SETINFO battery.voltage.nominal "36.0" 6.660512 [D2] send_to_one: sending SETINFO device.type "ups" 6.660565 [D2] send_to_one: sending SETINFO driver.debug "3" 6.660610 [D2] send_to_one: sending SETFLAGS driver.debug RW NUMBER 6.660644 [D2] send_to_one: sending SETINFO driver.flag.allow_killpower "0" 6.660713 [D2] send_to_one: sending SETFLAGS driver.flag.allow_killpower RW NUMBER 6.660749 [D2] send_to_one: sending SETINFO driver.flag.novendor "enabled" 6.660772 [D2] send_to_one: sending SETINFO driver.name "nutdrv_qx" 6.660826 [D2] send_to_one: sending SETINFO driver.parameter.pollfreq "30" 6.660849 [D2] send_to_one: sending SETINFO driver.parameter.pollinterval "2" 6.660906 [D2] send_to_one: sending SETINFO driver.parameter.port "auto" 6.660930 [D2] send_to_one: sending SETINFO driver.parameter.productid "0005" 6.660953 [D2] send_to_one: sending SETINFO driver.parameter.protocol "megatec" 6.660976 [D2] send_to_one: sending SETINFO driver.parameter.subdriver "phoenix" 6.660999 [D2] send_to_one: sending SETINFO driver.parameter.synchronous "auto" 6.661022 [D2] send_to_one: sending SETINFO driver.parameter.vendorid "06da" 6.661046 [D2] send_to_one: sending SETINFO driver.state "quiet" 6.661069 [D2] send_to_one: sending SETINFO driver.version "2.8.1.1" 6.661118 [D2] send_to_one: sending SETINFO driver.version.data "Megatec 0.07" 6.661171 [D2] send_to_one: sending SETINFO driver.version.internal "0.36" 6.661226 [D2] send_to_one: sending SETINFO driver.version.usb "libusb-1.0.0 (API: 0x1000102)" 6.661250 [D2] send_to_one: sending SETINFO input.current.nominal "4.0" 6.661273 [D2] send_to_one: sending SETINFO input.frequency "49.9" 6.661297 [D2] send_to_one: sending SETINFO input.frequency.nominal "50" 6.661320 [D2] send_to_one: sending SETINFO input.voltage "226.3" 6.661343 [D2] send_to_one: sending SETINFO input.voltage.fault "226.7" 6.661367 [D2] send_to_one: sending SETINFO input.voltage.nominal "230" 6.661390 [D2] send_to_one: sending SETINFO output.voltage "230.4" 6.661413 [D2] send_to_one: sending SETINFO ups.beeper.status "enabled" 6.661436 [D2] send_to_one: sending SETINFO ups.delay.shutdown "30" 6.661489 [D2] send_to_one: sending ADDRANGE ups.delay.shutdown 12 600 6.661514 [D2] send_to_one: sending SETFLAGS ups.delay.shutdown RW NUMBER 6.661557 [D2] send_to_one: sending SETINFO ups.delay.start "180" 6.661592 [D2] send_to_one: sending ADDRANGE ups.delay.start 0 599940 6.661616 [D2] send_to_one: sending SETFLAGS ups.delay.start RW NUMBER 6.661639 [D2] send_to_one: sending SETINFO ups.load "49" 6.661662 [D2] send_to_one: sending SETINFO ups.productid "0005" 6.661715 [D2] send_to_one: sending SETINFO ups.status "OL" 6.661738 [D2] send_to_one: sending SETINFO ups.temperature "28.0" 6.661761 [D2] send_to_one: sending SETINFO ups.type "online" 6.661800 [D2] send_to_one: sending SETINFO ups.vendorid "06da" 6.661838 [D2] send_to_one: sending ADDCMD beeper.toggle 6.661861 [D2] send_to_one: sending ADDCMD driver.killpower 6.661887 [D2] send_to_one: sending ADDCMD driver.reload 6.661909 [D2] send_to_one: sending ADDCMD driver.reload-or-error 6.661986 [D2] send_to_one: sending ADDCMD driver.reload-or-exit 6.662009 [D2] send_to_one: sending ADDCMD load.off 6.662032 [D2] send_to_one: sending ADDCMD load.on 6.662055 [D2] send_to_one: sending ADDCMD shutdown.return 6.662108 [D2] send_to_one: sending ADDCMD shutdown.stayoff 6.662130 [D2] send_to_one: sending ADDCMD shutdown.stop 6.662178 [D2] send_to_one: sending ADDCMD test.battery.start 6.662218 [D2] send_to_one: sending ADDCMD test.battery.start.deep 6.662253 [D2] send_to_one: sending ADDCMD test.battery.start.quick 6.662275 [D2] send_to_one: sending ADDCMD test.battery.stop 6.662328 [D2] send_to_one: sending DATAOK 6.662351 [D2] send_to_one: sending DUMPDONE 7.343329 [D1] upsdrv_updateinfo... 7.343423 [D1] Quick update... 8.422498 [D3] flush: Timeout (-7) 8.429853 [D3] send: Q1 8.659992 [D3] read: (226.7 226.7 230.1 050 49.9 2.17 28.0 00000001 9.385204 [D1] upsdrv_updateinfo... 9.385307 [D1] Quick update... 10.517338 [D3] flush: Timeout (-7) 10.523895 [D3] send: Q1 10.756075 [D3] read: (226.5 226.5 230.4 050 49.9 2.17 28.0 00000001 11.425271 [D1] upsdrv_updateinfo... 11.425370 [D1] Quick update... 12.496363 [D3] flush: Timeout (-7) 12.502724 [D3] send: Q1 12.740119 [D3] read: (226.5 226.5 230.6 050 49.9 2.17 28.0 00000001 13.468697 [D1] upsdrv_updateinfo... 13.468763 [D1] Quick update... 14.547361 [D3] flush: Timeout (-7) 14.553801 [D3] send: Q1 14.788118 [D3] read: (227.0 227.0 229.9 050 49.9 2.17 28.0 00000001 15.511996 [D1] upsdrv_updateinfo... 15.512095 [D1] Quick update... 16.604414 [D3] flush: Timeout (-7) 16.611082 [D3] send: Q1 16.844228 [D3] read: (227.2 227.2 229.9 050 49.9 2.17 28.0 00000001 17.554458 [D1] upsdrv_updateinfo... 17.554552 [D1] Quick update... 18.624368 [D3] flush: Timeout (-7) 18.630835 [D3] send: Q1 18.867872 [D3] read: (227.0 227.0 229.5 050 49.9 2.17 28.0 00000001 19.555936 [D1] upsdrv_updateinfo... 19.556008 [D1] Quick update... 20.631428 [D3] flush: Timeout (-7) 20.637882 [D3] send: Q1 20.867913 [D3] read: (227.2 227.2 230.4 049 49.9 2.17 28.0 00000001 21.556910 [D1] upsdrv_updateinfo... 21.556953 [D1] Quick update... 22.632441 [D3] flush: Timeout (-7) 22.638910 [D3] send: Q1 22.875962 [D3] read: (227.2 227.2 229.7 050 49.9 2.17 28.0 00000001 23.558053 [D1] upsdrv_updateinfo... 23.558119 [D1] Quick update... 24.632478 [D3] flush: Timeout (-7) 24.638976 [D3] send: Q1 24.876006 [D3] read: (227.2 227.2 230.4 050 49.9 2.17 28.0 00000001 25.558940 [D1] upsdrv_updateinfo... 25.559006 [D1] Quick update... 26.632561 [D3] flush: Timeout (-7) 26.639027 [D3] send: Q1 26.876056 [D3] read: (227.2 227.2 229.7 050 49.9 2.17 28.0 00000001 27.559937 [D1] upsdrv_updateinfo... 27.559998 [D1] Quick update... 28.694049 [D3] flush: Timeout (-7) 28.701451 [D3] send: Q1 28.932601 [D3] read: (226.7 226.7 230.1 052 49.9 2.17 28.0 00000001 29.598236 [D1] upsdrv_updateinfo... 29.598327 [D1] Quick update... 30.684037 [D3] flush: Timeout (-7) 30.691494 [D3] send: Q1 30.924644 [D3] read: (227.0 227.0 229.7 050 49.9 2.17 28.1 00000001 31.641522 [D1] upsdrv_updateinfo... 31.641633 [D1] Quick update... 32.749025 [D3] flush: Timeout (-7) 32.756492 [D3] send: Q1 32.988370 [D3] read: (227.0 227.0 229.7 049 49.9 2.17 28.1 00000001 33.641943 [D1] upsdrv_updateinfo... 33.642014 [D1] Quick update... 34.711718 [D3] flush: Timeout (-7) 34.718232 [D3] send: Q1 34.956258 [D3] read: (227.0 227.0 229.9 050 49.9 2.17 28.0 00000001 -
@LanterIT said in NUT Package (2.8.1 and above):
2.490438 [D3] send: FW?
2.572673 [D3] read: 05732-0300This eliminates hunnox and zinto.
@LanterIT said in NUT Package (2.8.1 and above):
2.489697 [D3] send: Q1
2.723945 [D3] read: (226.7 226.7 230.4 049 49.9 2.17 28.0 00000001
3.798980 [D3] flush: Timeout (-7)
3.805445 [D3] send: F
3.915503 [D3] read: #230.0 004 036.0 50.0
3.915997 No values for battery high/low voltages
3.916095 Using 'guesstimation' (low: 31.200000, high: 39.000000)!
3.916132 Autodetected 18 as number of battery packs [36/2.17]Excellent. This is working correctly. Vendor info is being suppressed, and it's even detecting the correct number of packs. Now, let's add the one pack voltage reporting back in:
vendorid=06da productid=0005 subdriver = "phoenix" protocol = "megatec" novendor battery_voltage_reports_one_packEdit: See BATTERY CHARGE GUESSTIMATION for information on setting up battery charge percentage.
-
Already tried, see post 242
-
@LanterIT said in NUT Package (2.8.1 and above):
Already tried, see post 242
I saw the setting of battery_voltage_reports_one_pack, but I didn't see a setting of default.battery.voltage.low and default.battery.voltage.high. I see override.battery.packs being set in the config, but I didn't see the driver saying number of packs in the debug output until the last run where it was auto-detected.
-
OK, next try...
current argument:
vendorid=06da productid=0005 subdriver = "phoenix" protocol = "megatec" novendor battery_voltage_reports_one_packoutput:
/usr/local/libexec/nut/nutdrv_qx -DDD -a ABB Network UPS Tools - Generic Q* USB/Serial driver 0.36 (2.8.1.1) USB communication driver (libusb 1.0) 0.46 0.000001 [D3] do_global_args: var='user' val='root' 0.000089 [D1] testval_reloadable: setting 'user' exists and differs: new value 'root' vs. 'nut' 0.000120 [D1] Overriding previously specified user 'nut' with 'root' specified in global section 0.000177 [D3] main_arg: var='driver' val='nutdrv_qx' 0.000216 [D3] main_arg: var='port' val='auto' 0.000272 [D3] main_arg: var='vendorid' val='06da' 0.000378 [D3] main_arg: var='productid' val='0005' 0.000445 [D3] main_arg: var='subdriver' val='phoenix' 0.000504 [D3] main_arg: var='protocol' val='megatec' 0.000558 [D3] main_arg: var='novendor' val='<null>' 0.000646 [D3] main_arg: var='battery_voltage_reports_one_pack' val='<null>' 0.000763 [D1] Network UPS Tools version 2.8.1.1 (release/snapshot of 2.8.1.1) built with FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152); Target: x86_64-unknown-freebsd14.0; Thread model: posix and configured with flags: --sysconfdir=/usr/local/etc/nut --program-transform-name= --localstatedir=/var/db/nut --datadir=/usr/local/etc/nut --with-devd-dir=/usr/local/etc/devd --with-drvpath=/usr/local/libexec/nut --with-statepath=/var/db/nut --with-altpidpath=/var/db/nut --with-pidpath=/var/db/nut --with-pkgconfig-dir=/usr/local/libdata/pkgconfig --with-user=nut --with-group=nut --with-python=/usr/local/bin/python3.11 --without-python2 --with-python3=/usr/local/bin/python3.11 --without-nut_monitor --with-ltdl --with-nut-scanner --with-avahi --with-cgi --with-cgipath=/usr/local/www/cgi-bin/nut --with-htmlpath=/usr/local/www/nut --with-gd-includes=-I/usr/local/include --with-gd-libs='-L/usr/local/lib -lgd' --without-dev --with-freeipmi --without-ipmi --with-doc=no --with-modbus --with-neon --without-nss --with-openssl --with-powerman --with-serial --with-snmp --with-usb=auto --prefix=/usr/local --mandir=/usr/local/man --disable-silent-rules --infodir=/usr/local/share/info/ --build=amd64-portbld-freebsd14.0 0.000823 [D1] debug level is '3' 0.002574 [D1] Succeeded to become_user(root): now UID=0 GID=0 0.002732 [D1] upsdrv_initups... 0.003977 [D2] Checking device 1 of 6 (0000/0000) 0.004591 [D1] nut_libusb_open: invalid libusb bus number 0 0.004723 [D2] - VendorID: 0000 0.004751 [D2] - ProductID: 0000 0.004775 [D2] - Manufacturer: AMD 0.004799 [D2] - Product: XHCI root HUB 0.004823 [D2] - Serial Number: unknown 0.004846 [D2] - Bus: 000 0.004869 [D2] - Bus Port: unknown 0.004892 [D2] - Device: 001 0.004916 [D2] - Device release number: 0100 0.004940 [D2] Trying to match device 0.004966 [D3] match_function_regex: matching a device... 0.005012 [D2] match_function_regex: failed match of VendorID: 0 0.005039 [D2] Device does not match - skipping 0.005137 [D2] Checking device 2 of 6 (0000/0000) 0.005281 [D1] nut_libusb_open: invalid libusb bus number 0 0.005367 [D2] - VendorID: 0000 0.005393 [D2] - ProductID: 0000 0.005416 [D2] - Manufacturer: AMD 0.005439 [D2] - Product: EHCI root HUB 0.005462 [D2] - Serial Number: unknown 0.005485 [D2] - Bus: 001 0.005510 [D2] - Bus Port: unknown 0.005533 [D2] - Device: 001 0.005556 [D2] - Device release number: 0100 0.005579 [D2] Trying to match device 0.005602 [D3] match_function_regex: matching a device... 0.005635 [D2] match_function_regex: failed match of VendorID: 0 0.005659 [D2] Device does not match - skipping 0.005738 [D2] Checking device 3 of 6 (0000/0000) 0.005879 [D1] nut_libusb_open: invalid libusb bus number 0 0.005961 [D2] - VendorID: 0000 0.005986 [D2] - ProductID: 0000 0.006012 [D2] - Manufacturer: AMD 0.006035 [D2] - Product: EHCI root HUB 0.006058 [D2] - Serial Number: unknown 0.006091 [D2] - Bus: 002 0.006114 [D2] - Bus Port: unknown 0.006137 [D2] - Device: 001 0.006160 [D2] - Device release number: 0100 0.006183 [D2] Trying to match device 0.006209 [D3] match_function_regex: matching a device... 0.006242 [D2] match_function_regex: failed match of VendorID: 0 0.006266 [D2] Device does not match - skipping 0.006343 [D2] Checking device 4 of 6 (0438/7900) 0.006491 [D2] - VendorID: 0438 0.006522 [D2] - ProductID: 7900 0.006545 [D2] - Manufacturer: unknown 0.006571 [D2] - Product: unknown 0.006594 [D2] - Serial Number: unknown 0.006617 [D2] - Bus: 001 0.006641 [D2] - Bus Port: 001 0.006663 [D2] - Device: 002 0.006687 [D2] - Device release number: 0018 0.006710 [D2] Trying to match device 0.006733 [D3] match_function_regex: matching a device... 0.006768 [D2] match_function_regex: failed match of VendorID: 438 0.006792 [D2] Device does not match - skipping 0.006866 [D2] Checking device 5 of 6 (0438/7900) 0.007016 [D2] - VendorID: 0438 0.007049 [D2] - ProductID: 7900 0.007079 [D2] - Manufacturer: unknown 0.007103 [D2] - Product: unknown 0.007126 [D2] - Serial Number: unknown 0.007149 [D2] - Bus: 002 0.007176 [D2] - Bus Port: 001 0.007199 [D2] - Device: 002 0.007224 [D2] - Device release number: 0018 0.007247 [D2] Trying to match device 0.007270 [D3] match_function_regex: matching a device... 0.007302 [D2] match_function_regex: failed match of VendorID: 438 0.007326 [D2] Device does not match - skipping 0.007404 [D2] Checking device 6 of 6 (06DA/0005) 0.094984 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.124015 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.152963 [D1] nut_libusb_open get iSerialNumber failed, retrying... 0.153061 [D2] - VendorID: 06da 0.153100 [D2] - ProductID: 0005 0.153123 [D2] - Manufacturer: PPC 0.153147 [D2] - Product: USB UPS 0.153172 [D2] - Serial Number: unknown 0.153195 [D2] - Bus: 000 0.153217 [D2] - Bus Port: 003 0.153239 [D2] - Device: 002 0.153262 [D2] - Device release number: 0001 0.153285 [D2] Trying to match device 0.153309 [D3] match_function_regex: matching a device... 0.153383 [D2] Device matches 0.153408 [D2] Reading configuration descriptor 1 of 1 0.153725 [D3] libusb_kernel_driver_active() returned 0: Success 0.153770 [D2] Claimed interface 0 successfully 0.153807 [D3] nut_usb_set_altinterface: skipped libusb_set_interface_alt_setting(udev, 0, 0) 0.153939 [D2] Skipping protocol Voltronic 0.08 0.153970 [D2] Skipping protocol Voltronic-QS 0.09 0.153997 [D2] Skipping protocol Voltronic-QS-Hex 0.10 0.154024 [D2] Skipping protocol Mustek 0.08 0.154050 [D2] Skipping protocol Megatec/old 0.08 0.154082 [D2] Skipping protocol BestUPS 0.07 0.154109 [D2] Skipping protocol Mecer 0.08 1.280574 [D3] flush: Timeout (-7) 1.287960 [D3] send: Q1 1.523148 [D3] read: (226.7 226.7 229.7 045 50.0 2.17 28.1 00000001 1.523434 Using protocol: Megatec 0.07 1.523506 [D2] blazer_initups: skipping device.mfr 1.523564 [D2] blazer_initups: skipping device.model 1.523596 [D2] blazer_initups: skipping ups.firmware 1.523739 [D1] upsdrv_initinfo... 2.650528 [D3] flush: Timeout (-7) 2.657912 [D3] send: Q1 2.891219 [D3] read: (226.5 226.5 229.7 045 50.0 2.17 28.2 00000001 3.981495 [D3] flush: Timeout (-7) 3.988995 [D3] send: F 4.099234 [D3] read: #230.0 004 036.0 50.0 4.099812 No values for battery high/low voltages 4.099893 Using 'guesstimation' (low: 31.200000, high: 39.000000)! 4.099955 Autodetected 18 as number of battery packs [36/2.17] 4.099985 Battery runtime will not be calculated (runtimecal not set) 4.100099 [D1] upsdrv_updateinfo... 4.100133 [D1] Quick update... 5.247277 [D3] flush: Timeout (-7) 5.253738 [D3] send: Q1 5.490769 [D3] read: (226.1 226.1 230.1 045 50.0 2.17 28.1 00000001 5.491951 [D2] dstate_init: sock /var/db/nut/nutdrv_qx-ABB open on fd 8 5.492211 [D1] Group and/or user account for this driver was customized ('root:nut') compared to built-in defaults. Fixing socket '/var/db/nut/nutdrv_qx-ABB' ownership/access. 5.492298 [D1] WARNING: opening socket file for stat/chown failed (45), which is rather typical for Unix socket handling: Operation not supported 5.492486 [D1] Group access for this driver successfully fixed (using file name based methods) 5.492565 Running as foreground process, not saving a PID file 5.492659 [D1] Driver initialization completed, beginning regular infinite loop 5.492689 upsnotify: failed to notify about state 2: no notification tech defined, will not spam more about it 5.492726 [D1] upsdrv_updateinfo... 5.492760 [D1] Quick update... 6.566275 [D3] flush: Timeout (-7) 6.572766 [D3] send: Q1 6.802791 [D3] read: (226.1 226.1 230.6 046 50.0 2.17 28.1 00000001 6.803012 sock_connect: enabling asynchronous mode (auto) 6.803220 [D3] new connection on fd 9 6.803311 [D2] send_to_one: sending SETINFO battery.charge "0" 6.803370 [D2] send_to_one: sending SETINFO battery.voltage "2.17" 6.803416 [D2] send_to_one: sending SETINFO battery.voltage.high "39.00" 6.803468 [D2] send_to_one: sending SETINFO battery.voltage.low "31.20" 6.803508 [D2] send_to_one: sending SETINFO battery.voltage.nominal "36.0" 6.803551 [D2] send_to_one: sending SETINFO device.type "ups" 6.803591 [D2] send_to_one: sending SETINFO driver.debug "3" 6.803635 [D2] send_to_one: sending SETFLAGS driver.debug RW NUMBER 6.803674 [D2] send_to_one: sending SETINFO driver.flag.allow_killpower "0" 6.803717 [D2] send_to_one: sending SETFLAGS driver.flag.allow_killpower RW NUMBER 6.803758 [D2] send_to_one: sending SETINFO driver.flag.battery_voltage_reports_one_pack "enabled" 6.803799 [D2] send_to_one: sending SETINFO driver.flag.novendor "enabled" 6.803844 [D2] send_to_one: sending SETINFO driver.name "nutdrv_qx" 6.803883 [D2] send_to_one: sending SETINFO driver.parameter.pollfreq "30" 6.803923 [D2] send_to_one: sending SETINFO driver.parameter.pollinterval "2" 6.803967 [D2] send_to_one: sending SETINFO driver.parameter.port "auto" 6.804010 [D2] send_to_one: sending SETINFO driver.parameter.productid "0005" 6.804053 [D2] send_to_one: sending SETINFO driver.parameter.protocol "megatec" 6.804105 [D2] send_to_one: sending SETINFO driver.parameter.subdriver "phoenix" 6.804155 [D2] send_to_one: sending SETINFO driver.parameter.synchronous "auto" 6.804198 [D2] send_to_one: sending SETINFO driver.parameter.vendorid "06da" 6.804238 [D2] send_to_one: sending SETINFO driver.state "quiet" 6.804278 [D2] send_to_one: sending SETINFO driver.version "2.8.1.1" 6.804319 [D2] send_to_one: sending SETINFO driver.version.data "Megatec 0.07" 6.804360 [D2] send_to_one: sending SETINFO driver.version.internal "0.36" 6.804403 [D2] send_to_one: sending SETINFO driver.version.usb "libusb-1.0.0 (API: 0x1000102)" 6.804447 [D2] send_to_one: sending SETINFO input.current.nominal "4.0" 6.804488 [D2] send_to_one: sending SETINFO input.frequency "50.0" 6.804526 [D2] send_to_one: sending SETINFO input.frequency.nominal "50" 6.804569 [D2] send_to_one: sending SETINFO input.voltage "226.7" 6.804609 [D2] send_to_one: sending SETINFO input.voltage.fault "226.5" 6.804648 [D2] send_to_one: sending SETINFO input.voltage.nominal "230" 6.804689 [D2] send_to_one: sending SETINFO output.voltage "229.7" 6.804731 [D2] send_to_one: sending SETINFO ups.beeper.status "enabled" 6.804769 [D2] send_to_one: sending SETINFO ups.delay.shutdown "30" 6.804809 [D2] send_to_one: sending ADDRANGE ups.delay.shutdown 12 600 6.804852 [D2] send_to_one: sending SETFLAGS ups.delay.shutdown RW NUMBER 6.804891 [D2] send_to_one: sending SETINFO ups.delay.start "180" 6.804932 [D2] send_to_one: sending ADDRANGE ups.delay.start 0 599940 6.804973 [D2] send_to_one: sending SETFLAGS ups.delay.start RW NUMBER 6.805010 [D2] send_to_one: sending SETINFO ups.load "45" 6.805053 [D2] send_to_one: sending SETINFO ups.productid "0005" 6.805099 [D2] send_to_one: sending SETINFO ups.status "OL" 6.805139 [D2] send_to_one: sending SETINFO ups.temperature "28.2" 6.805181 [D2] send_to_one: sending SETINFO ups.type "online" 6.805221 [D2] send_to_one: sending SETINFO ups.vendorid "06da" 6.805261 [D2] send_to_one: sending ADDCMD beeper.toggle 6.805302 [D2] send_to_one: sending ADDCMD driver.killpower 6.805339 [D2] send_to_one: sending ADDCMD driver.reload 6.805378 [D2] send_to_one: sending ADDCMD driver.reload-or-error 6.805417 [D2] send_to_one: sending ADDCMD driver.reload-or-exit 6.805455 [D2] send_to_one: sending ADDCMD load.off 6.805494 [D2] send_to_one: sending ADDCMD load.on 6.805532 [D2] send_to_one: sending ADDCMD shutdown.return 6.805573 [D2] send_to_one: sending ADDCMD shutdown.stayoff 6.805614 [D2] send_to_one: sending ADDCMD shutdown.stop 6.805655 [D2] send_to_one: sending ADDCMD test.battery.start 6.805692 [D2] send_to_one: sending ADDCMD test.battery.start.deep 6.805730 [D2] send_to_one: sending ADDCMD test.battery.start.quick 6.805771 [D2] send_to_one: sending ADDCMD test.battery.stop 6.805810 [D2] send_to_one: sending DATAOK 6.805851 [D2] send_to_one: sending DUMPDONE 7.493162 [D1] upsdrv_updateinfo... 7.493228 [D1] Quick update... 8.566325 [D3] flush: Timeout (-7) 8.572805 [D3] send: Q1 8.802829 [D3] read: (226.3 226.3 229.7 045 50.0 2.17 28.2 00000001 9.494163 [D1] upsdrv_updateinfo... 9.494231 [D1] Quick update... 10.575796 [D3] flush: Timeout (-7) 10.583210 [D3] send: Q1 10.819367 [D3] read: (226.5 226.5 230.1 045 50.0 2.17 28.2 00000001 11.537177 [D1] upsdrv_updateinfo... 11.537275 [D1] Quick update... 12.607897 [D3] flush: Timeout (-7) 12.615235 [D3] send: Q1 12.851361 [D3] read: (226.1 226.1 231.0 045 50.0 2.17 28.1 00000001 13.564983 [D1] upsdrv_updateinfo... 13.565080 [D1] Quick update... 14.659887 [D3] flush: Timeout (-7) 14.667294 [D3] send: Q1 14.899460 [D3] read: (226.3 226.3 230.4 046 50.0 2.17 28.1 00000001 15.566213 [D1] upsdrv_updateinfo... 15.566313 [D1] Quick update... 16.638475 [D3] flush: Timeout (-7) 16.644960 [D3] send: Q1 16.874991 [D3] read: (226.3 226.3 229.7 045 50.0 2.17 28.1 00000001 17.567157 [D1] upsdrv_updateinfo... 17.567232 [D1] Quick update... 18.638539 [D3] flush: Timeout (-7) 18.644995 [D3] send: Q1 18.883030 [D3] read: (226.3 226.3 229.9 046 50.0 2.17 28.2 00000001 19.568153 [D1] upsdrv_updateinfo... 19.568218 [D1] Quick update... -
From my point of view, it is not possible for the UPS to measure just a single battery cell. There are three 12V 9.6Ah batteries in series in it, with two cables, plus/minus and no additional measuring lines.
From this I conclude that this value is somehow already calculated. Could this be the case?
-
@LanterIT said in NUT Package (2.8.1 and above):
From my point of view, it is not possible for the UPS to measure just a single battery cell. There are three 12V 9.6Ah batteries in series in it, with two cables, plus/minus and no additional measuring lines.
Fair point. Nominal voltage should be 36 volts.
The blazer_usb driver run shows this:
1.259834 [D3] send: Q1 1.494125 [D3] read: (225.7 225.7 230.1 047 50.0 2.18 28.0 00000001 1.494469 [D2] Status read in 1 tries 1.494497 Supported UPS detected with megatec protocol 2.631643 [D3] flush: Timeout 2.639009 [D3] send: F 2.749987 [D3] read: #230.0 004 036.0 50.0 2.750183 [D2] Ratings read in 1 triesAnd the nutdrv_qx megatec driver run shows this:
2.489697 [D3] send: Q1 2.723945 [D3] read: (226.7 226.7 230.4 049 49.9 2.17 28.0 00000001 3.798980 [D3] flush: Timeout (-7) 3.805445 [D3] send: F 3.915503 [D3] read: #230.0 004 036.0 50.0Looking at the strings being sent by the UPS, the different runs match well and are within a normal expected variance for the values:
Q1:
input.voltage: 225.7 / 226.7 input.voltage.fault: 225.7 / 226.7 output.voltage: 230.1 / 230.4 ups.load: 47 / 49 input.frequency: 50.0 / 49.9 battery.voltage: 2.18 / 2.17 ups.temperature: 28.0 ups.beeper.status: onF:
input.voltage.nominal: 230.0 input.current.nominal: 4 battery.voltage.nominal: 36.0 input.frequency.nominal: 50.0The nominal voltage of 36 matches the physical description of the batteries. The actual reported battery.voltage (2.18/2.17) appears completely fictional. But apparently this is a known/expected behavior with these types of UPSs. See here and here for discussion by one of the NUT team leaders.
FWIW, I am still looking at the code to see what actually ended up in the various releases.
-
@LanterIT Can you confirm which version of nut-devel you used in the later debug tests? If I understand correctly, it was 2024.01.03, but I just want to double check.
The tests I am asking about are:
- blazer_usb (post 249)
- nutdrv_qx (post 251 & 256)
Thanks
-
correct, all posts since 241 are with APU2 and fully updated packages
-
@LanterIT said in NUT Package (2.8.1 and above):
all posts since 241 are with APU2 and fully updated packages
Thank you
-
@LanterIT If you have time, would you mind re-running those two tests with a higher debug level (-DDDDDD) please?
