cant upgrade to 2.7.2
-
@stephenw10 said in cant upgrade to 2.7.2:
Mmm, well I would have expected that to be new enough but older systems can have an EFI partition that is too small.
Try running
gpart list
and check the size. It should be at least 200MB. For example:1. Name: da0p1 Mediasize: 272629760 (260M) Sectorsize: 512 Stripesize: 0 Stripeoffset: 20480 Mode: r1w1e2 efimedia: HD(1,GPT,c9024410-fde3-11ee-bfd2-0008a212ecd4,0x28,0x82000) rawuuid: c9024410-fde3-11ee-bfd2-0008a212ecd4 rawtype: c12a7328-f81f-11d2-ba4b-00a0c93ec93b label: efiboot0 length: 272629760 offset: 20480 type: efi index: 1 end: 532519 start: 40
it seems mine is exactly 200
209715200 (200M) -
Hmm, is that system actually booting UEFI?
-
@stephenw10 said in cant upgrade to 2.7.2:
Hmm, is that system actually booting UEFI?
it should be. it showed the same values as you except mine 200M
label and type both efithis is the first update i had this problem i have a 128 gb nvme in there i think it was.
-
Run
sysctl machdep.bootmethod
just to be sure it's booting UEFI. It's possible that partition was never formatted if not. -
-
Hmm, OK what does
geom -t
show? -
@stephenw10 said in cant upgrade to 2.7.2:
geom -t
-
Is it mounted? How does it show in the output of
df -hi
? -
If the filesystem is just smaller than the partition you may be able to fix that with the commands shown here:
https://forum.netgate.com/post/1140955 -
@stephenw10 said in cant upgrade to 2.7.2:
Is it mounted? How does it show in the output of
df -hi
? -
@stephenw10 said in cant upgrade to 2.7.2:
If the filesystem is just smaller than the partition you may be able to fix that with the commands shown here:
https://forum.netgate.com/post/1140955i did follow it and the update went thru. And it installed the update to 2.7.2 without problems it seems. Thank you.
-
Ah, cool.