cant upgrade to 2.7.2
-
@stephenw10 said in cant upgrade to 2.7.2:
Hmm, is that system actually booting UEFI?
it should be. it showed the same values as you except mine 200M
label and type both efithis is the first update i had this problem i have a 128 gb nvme in there i think it was.
-
Run
sysctl machdep.bootmethod
just to be sure it's booting UEFI. It's possible that partition was never formatted if not. -
-
Hmm, OK what does
geom -t
show? -
@stephenw10 said in cant upgrade to 2.7.2:
geom -t
-
Is it mounted? How does it show in the output of
df -hi
? -
If the filesystem is just smaller than the partition you may be able to fix that with the commands shown here:
https://forum.netgate.com/post/1140955 -
@stephenw10 said in cant upgrade to 2.7.2:
Is it mounted? How does it show in the output of
df -hi
? -
@stephenw10 said in cant upgrade to 2.7.2:
If the filesystem is just smaller than the partition you may be able to fix that with the commands shown here:
https://forum.netgate.com/post/1140955i did follow it and the update went thru. And it installed the update to 2.7.2 without problems it seems. Thank you.
-
Ah, cool.