pfSense CE Download
-
@stephenw10 i will try again over the Weekend, and i send you Photo
-
@mak73 So i tried again,
the problem is that i want to use UFS, not ZFS, with ZFS i can installs, but GUI is a littlte bit slow somehow. But i don't want to use ZFS with one nvme SSD.THX
-
You can choose UFS in the Net Installer. Is that causing a problem somehow?
-
@stephenw10 Yes, i tried many times.
-
@mak73 But i want to inform that in VirtualBox i installed with UFS and there was not a problem.
What is also annoying, is , i have connected a Cherry Keyboard, and on some 30 seconds comes connected, disconnected, but it works, and would be nice to choose Keyboard Layout language.
Later, after installation with ZFS, i made a Ports Alias (80,443,25,...) Whole Internet Range, than Guest VLAN, with a Firewall Rule, first Allow DNS, than allow Alias, the Guests gets a ip, but no Internet.
In VirtualBox all of this works great. I still think that the problem is somehow within installation.
Maybe is a Hardware conditional.
Latter i installed a ipfire to test of maybe defective Hardware, but all worked out. -
Hmm, so, to be clear, you can install as UFS in VBox? But fails in some other device?
Connectivity issues after install are not related to the installer.
-
@stephenw10 Yes. Right.
-
OK so how does it fail when you try to install on that other device?
What is that other device?
-
@stephenw10 The Device:
https://www.amazon.de/Firewall-Appliance-HUNSN-Barebone-Storage-H-N100/dp/B0C8J2Q5TB/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1I77SRBLAY78G&dib=eyJ2IjoiMSJ9.EGGFqxZz9P19Fw0NPPD79L3Av5mGwCyEKU1ihvR7lpJ3YJRYzxaQoSlxDrc-szpPhWQttC3bqn66MUUKe-2h11cH5ilUUt_gHehvUpM6Xum0fIpgdPnGrXMEDVZ1jwvcYAShrNSjp42rXjNR-Owqwiu7f9Dt__yL4XDJA7Qv8DlHjGMxJ4d7LML8G-soxWE1-TwnP9urXAV0sYs3GQDoYkrsTUyd2G8QQTL6eh2WcmI.JPuFlUPE1MVqOuq6SjzAtIpFlx6g-CgEQmYZrIN6QHM&dib_tag=se&keywords=HUNSN%2Bmini%2Bpc&qid=1719206239&sprefix=hunsn%2Bmini%2Bpc%2Caps%2C112&sr=8-3&th=1And it fails with:
/mnt error and time sync pkgs -
@mak73 I tried other Software (Linux, Windows and yesterday Opnsense on UFS on this device, and all worked, but i want to use pfSense on UFS, not ZFS.
What i tried: Netgate installer img, iso, created with dd under Linux, than Balena Etcher and Rufus.
With UFS always the same error. During installation i choose PPPoE put my username and pass and it starts, but ends always with that error. With ZFS than goes, but at reboot i don't see pfSense Logo, but FreeBSD. -
@Flowi001 said in pfSense CE Download:
@mak73 I may have missed it, but does pfSense install OK if you use a physical image?
-
@Patch i tried, thehe were some errors , but at boot also FreeBSD logo and not pfSense.. And somehow all was very slow , i will try again, but not during the day, i need internet.
-
@mak73 said in pfSense CE Download:
With UFS always the same error. During installation i choose PPPoE put my username and pass and it starts, but ends always with that error.
Aha, so you are using PPPoE. Do you have a screenshot of that error? I can try to replicate it.
Installing from the legacy image should work though.
-
@stephenw10 Yes, PPPoE, Deutsche Telekom,
! How to send images here?
Error
Something went wrong while parsing server response
-
-
@mak73 i checked disk, no errors, Samsung NVME
-
Ah a checksum error when trying to extract a pkg. Interesting.
Does it also fail if you try to install ZFS on the same device?
-
@stephenw10 No, with ZFS no such errors.
-
Hmm, odd. Does it fail identically each time you try to install as UFS?
-
@stephenw10 Yes, with netgate-installer Beta7 yes.
