Open up a vlan ip to the outside

[rashadmahmood]

@JKnott - yep its a managed switch

[johnpoz]

@JKnott said in Open up a vlan ip to the outside:

, but it's always possible.

What part are you not getting that this is a Windows PC??

His cameras should point to pfsense as their gateway.. That is if he wants them to talk to the internet to say get firmware updates. Or if he wants to talk to them directly via his vpn connection without doing source natting. Or any other local networks.

[rashadmahmood]

@johnpoz

refering to this:

@rashadmahmood said in Open up a vlan ip to the outside:

So I'm thinking of implementing the following

Network 1:

Subnet: 192.168.0.0/24
Gateway: 192.168.0.1 (pfSense)
Windows machine for viewing cameras: Assign a unique IP within the range, e.g., 192.168.0.10/24
Other LAN devices: Assign unique IPs within the range.
VLAN 1:

VLAN 1 Interface for Access Point 1: 192.168.0.2/24
VLAN 1 Interface for Access Point 2: 192.168.0.3/24

Network 2 (CCTV):

Subnet: 10.0.0.0/25
NIC 2 of the Windows machine: Assign an IP within this range, e.g., 10.0.0.1 with no gateway
cameras 1 to 4 set with no gateway

Example Configuration:
pfSense Gateway: 192.168.0.1/24
Windows Machine NIC 1 (Network 1): 192.168.0.10/24
Windows Machine NIC 2 (Network 2): 10.0.0.1/25
Access Point 1: 192.168.0.2
Access Point 2: 192.168.0.3

Also create a vpn to access the 192.168.0.0/24 network

Apologies, its been a while since I messed with network configs.

So I need to add the gateway into the 2nd LAN, it does kind of make sense for updating firmwares etc..

[johnpoz]

@rashadmahmood I would set your cameras with pfsense as their gateway, they are not multihomed, etc.. If you want to talk to them directly from any other local network or via your vpn.. They need to be able to talk back..

The only device that you would not set a gateway on is your NVR box that you will have multihomed..

[rashadmahmood]

@johnpoz

Network 1:

Subnet: 192.168.0.0/24
Gateway: 192.168.0.1 (pfSense)
Windows machine for viewing cameras: Assign a unique IP within the range, e.g., 192.168.0.10/24 - dont set gateway
Other LAN devices: Assign unique IPs within the range.
VLAN 1:

VLAN 1 Interface for Access Point 1: 192.168.0.2/24
VLAN 1 Interface for Access Point 2: 192.168.0.3/24

Network 2 (CCTV):

Subnet: 10.0.0.0/25
NIC 2 of the Windows machine: Assign an IP within this range, e.g., 10.0.0.1 with gateway of lan1 192.168.0.1
cameras 1 to 4 set with gateway of lan1 192.168.0.1

Example Configuration:
pfSense Gateway: 192.168.0.1/24
Windows Machine NIC 1 (Network 1): 192.168.0.10/24
Windows Machine NIC 2 (Network 2): 10.0.0.1/25
Access Point 1: 192.168.0.2
Access Point 2: 192.168.0.3

Also create a vpn to access the 192.168.0.0/24 network

Does this make sense?

[johnpoz]

@rashadmahmood Not sure why you are calling out vlan 1 or what IPs your AP are going to be on - what does that have to do with anything?

What vlan are you going to create on your switch for this camera network? It would not be the default vlan 1 if that is the network your putting your normal 192.168.0 network on.

[rashadmahmood]

@johnpoz

the cameras will go in the 10.0.0.0 range, no vlan

[johnpoz]

@rashadmahmood said in Open up a vlan ip to the outside:

no vlan

There needs to be a vlan on your switch.. You don't need to tag it on pfsense, it would jsut be a native - but if you just put it on vlan 1 on your switch there is no actual isolation..

Your vlan you create on yoru switch, lets call it vlan 10, because your going to be using the 10.0.0 network on this network.. Would be access port (ie not tagged) in vlan 10 to your port on pfsense. Then ports your cameras plug into would be also untagged vlan 10 on the switch.

If your on vlan 1 only on the switch - your dhcp isn't going to work for your different networks, any device on vlan 1 on the switch could get either IP from your camera network or your lan network.. All broadcast and multicast would go to all ports, etc. Your cameras could get dhcp from either network, etc.

So yes you need to create a camera network vlan on your switch.

[rashadmahmood]

@johnpoz

I really appreciate the responses, I figured, I throw all this into chatgpt and its has come up with the following

Network Design

Components

1. pfSense (Firewall/Router)
2. 2 Access Points
3. 1 Windows Machine with Two NICs
   • NIC1: Network to view cameras
   • NIC2: Separate network for the IP cameras (4 cameras)
4. 1 VOIP Server
5. 1 Managed PoE Switch
6. VPN for remote access
7. IP Cameras

Requirements

1. Privacy between access points and LAN computers
2. IP cameras connected to the PoE switch
3. VPN access to view cameras remotely
4. IP cameras able to access the internet for firmware updates

Network Design with VLANs

Subnets and VLANs

• Main LAN: 192.168.0.0/24 (VLAN 10)
  • Gateway: 192.168.0.1 (pfSense)
• Camera Network: 192.168.1.0/24 (VLAN 20)
  • Gateway: 192.168.1.1 (pfSense)
• VOIP Network: 192.168.2.0/24 (VLAN 30)
  • Gateway: 192.168.2.1 (pfSense)
• Access Points: 192.168.3.0/24 (VLAN 40)
  • Gateway: 192.168.3.1 (pfSense)

Network Topology

      +-----------------+
      |     Internet    |
      +--------+--------+
               |
               | (WAN)
               |
      +--------+--------+
      |      pfSense     |
      |  VLAN 10: 192.168.0.1     |
      |  VLAN 20: 192.168.1.1     |
      |  VLAN 30: 192.168.2.1     |
      |  VLAN 40: 192.168.3.1     |
      +--------+--------+
               |
               | (LAN)
               |
        +------+------+
        |   Managed   |
        |     PoE     |
        |    Switch   |
        +------+------+
               |
  +------------+-------------+
  |            |             |
  |            |             |
  |            |             |
  |         VLAN 10          |
  |        Main LAN          |
  |       Devices and        |
  |    Windows Machine NIC1  |
  |     192.168.0.10         |
  |                          |
  |            |             |
  |            |             |
  |            |             |
  +------------+-------------+
  |            |             |
  |        VLAN 20           |
  |      IP Cameras          |
  |   Windows Machine NIC2   |
  |    192.168.1.10          |
  |                          |
  +------------+-------------+
  |            |             |
  |        VLAN 30           |
  |     VOIP Server          |
  |                          |
  |                          |
  +------------+-------------+
  |            |             |
  |        VLAN 40           |
  |    Access Points         |
  |                          |
  +--------------------------+

Configuration Steps

1. pfSense Configuration:

   • Configure interfaces for each VLAN:
     • VLAN 10: Main LAN (192.168.0.1/24)
     • VLAN 20: Camera Network (192.168.1.1/24)
     • VLAN 30: VOIP Network (192.168.2.1/24)
     • VLAN 40: Access Points (192.168.3.1/24)
   • Set up DHCP for each VLAN if needed.
   • Configure firewall rules to allow appropriate traffic between VLANs.
   • Set up VPN to provide remote access to the camera network.

2. Managed PoE Switch Configuration:

   • Create VLANs:
     • VLAN 10: Main LAN
     • VLAN 20: Camera Network
     • VLAN 30: VOIP Network
     • VLAN 40: Access Points
   • Assign ports to the respective VLANs.
   • Ensure ports connected to IP cameras are in VLAN 20.
   • Configure trunk ports for pfSense connection.

3. Access Points Configuration:

   • Configure the access points to use VLAN 40 (192.168.3.0/24).
   • Set up SSIDs and security settings as required.

4. Windows Machine Configuration:

   • NIC1 (Main LAN): Static IP 192.168.0.10, Subnet Mask 255.255.255.0, Gateway 192.168.0.1.
   • NIC2 (Camera Network): Static IP 192.168.1.10, Subnet Mask 255.255.255.0, no Gateway.

5. VOIP Server Configuration:

   • Assign a static IP in the VOIP Network (e.g., 192.168.2.10).
   • Ensure proper VLAN tagging for the VOIP server port.

6. IP Camera Configuration:

   • Assign static IPs in the Camera Network (192.168.1.0/24).
   • Ensure cameras can reach the internet through pfSense for firmware updates.
   • Set up necessary routes and firewall rules on pfSense to allow camera network internet access.

7. VPN Configuration:

   • Configure OpenVPN or another VPN solution on pfSense.
   • Ensure VPN clients have access to the Camera Network (192.168.1.0/24) and any necessary resources.

Summary

This setup provides separation between different network segments using VLANs, ensuring privacy and security. The managed PoE switch is configured to support multiple VLANs, and pfSense is set up to route traffic and manage firewall rules between these VLANs. VPN allows remote access to the camera network while maintaining security.

[johnpoz]

@rashadmahmood that is with only the 1 physical connection with your vlans running over it..

Just create a new uplink from your switch in say vlan 10, not tagged and connect to pfsense on another interface that you put your 10.0.0 network on..