Kernel Panic on OpenBrick-E
-
This may be my hardware failing- however whenever I attempt to load the webinterface it now panics and reboots, this was after importing my interfaces from 1.2.3-RC3 config. Could this be because i added VLANs? Is the em0/vlan driver code in 2.0 stable?
pfsense:~# dmesg
Copyright
1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RC1 #0: Sat Oct 24 21:19:39 UTC 2009
sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap.8.i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: VIA Samuel 2 (531.82-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x673 Stepping = 3
Features=0x803035 <fpu,de,tsc,msr,mtrr,pge,mmx>real memory = 268435456 (256 MB)
avail memory = 240381952 (229 MB)
wlan: mac acl policy registered
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <via601 awrdacpi="">on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, f6f0000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <power button="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f,0x6000-0x607f on acpi0
pci0: <acpi pci="" bus="">on pcib0
pcib1: <pci-pci bridge="">at device 1.0 on pci0
pci1: <pci bus="">on pcib1
vgapci0: <vga-compatible display="">mem 0xe4000000-0xe47fffff,0xe5000000-0xe501ffff,0xe4800000-0xe4ffffff irq 12 at device 0.0 on pci1
isab0: <pci-isa bridge="">at device 7.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <via 82c686b="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd000-0xd00f at device 7.1 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
pci0: <bridge>at device 7.4 (no driver attached)
fxp0: <intel 100="" 82551="" pro="" ethernet="">port 0xdc00-0xdc3f mem 0xe58a0000-0xe58a0fff,0xe5800000-0xe581ffff irq 12 at device 8.0 on pci0
miibus0: <mii bus="">on fxp0
inphy0: <i82555 10="" 100="" media="" interface="">PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:40:f4:47:e7:ff
fxp0: [ITHREAD]
fxp1: <intel 100="" 82551="" pro="" ethernet="">port 0xe000-0xe03f mem 0xe58a1000-0xe58a1fff,0xe5820000-0xe583ffff irq 10 at device 9.0 on pci0
miibus1: <mii bus="">on fxp1
inphy1: <i82555 10="" 100="" media="" interface="">PHY 1 on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:40:f4:47:e8:00
fxp1: [ITHREAD]
em0: <intel(r) 1000="" pro="" network="" connection="" 6.9.14="">port 0xe400-0xe43f mem 0xe5840000-0xe585ffff,0xe5860000-0xe587ffff irq 11 at device 11.0 on pci0
em0: [FILTER]
em0: Ethernet address: 00:40:f4:47:e8:01
atrtc0: <at realtime="" clock="">port 0x70-0x73 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <parallel port="">port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <parallel port="" bus="">on ppc0
ppi0: <parallel i="" o="">on ppbus0
cpu0: <acpi cpu="">on acpi0
acpi_throttle0: <acpi cpu="" throttling="">on cpu0
orm0: <isa option="" roms="">at iomem 0xc0000-0xcbfff,0xcc000-0xda7ff pnpid ORM0000 on isa0
Timecounter "TSC" frequency 531821564 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
ad3: 976MB <toshiba thncf1g02qg="" 3.00="">at ata1-slave PIO4
Trying to mount root from ufs:/dev/ufs/pfsense0
vlan0: changing name to 'em0_vlan49'
vlan1: changing name to 'em0_vlan50'
vlan2: changing name to 'em0_vlan66'
pflog0: promiscuous mode enabled
pfsense:~#Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x250
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc04c8bd7
stack pointer = 0x28:0xe2493728
frame pointer = 0x28:0xe2493970
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (em0 taskq)
trap number = 12
panic: page fault
Uptime: 3m53s
Cannot dump. Device not defined or unavailable.
Automatic reboot in 15 seconds - press a key on the console to abort
Rebooting…</toshiba></isa></acpi></acpi></parallel></parallel></parallel></at></intel(r)></i82555></mii></intel></i82555></mii></intel></bridge></ata></ata></via></isa></pci-isa></vga-compatible></pci></pci-pci></acpi></acpi></power></via601></software></fpu,de,tsc,msr,mtrr,pge,mmx>
-
Take a look at the thread from yesterday about Alix crashing, seems like a similar problem.
No real clue yet on what the cause is though.
Josh
-
Take a look at the thread from yesterday about Alix crashing, seems like a similar problem.
No real clue yet on what the cause is though.
JoshThe problems with the Alix were in user space- dhcpd, apingger, where as I'm getting kernel panics with the em0 driver… ?