Help get my Captive Portal working. on 1.2.3 RC3 NANBSD $50
-
I need help getting this working. CaptivePortal will not redirect at all. and now I am under the gun to get it done by next friday.
Will pay $50 to someone with experience that can get the Captive Portal working. I can give access via TeamViewer, ShowMyPC or other remote screen access.
Thanks,
Mark
-
I just imaged a CF with the most current 1.2.3-RC3 nanobsd snapshot and setup captive portal with redirect and had no problems on my ALIX.
Here are the settings I used, with my IP addresses as an example:
OPT1 enabled, IP 192.168.15.1/24
DHCP Server on OPT1 enabled, range 192.168.15.10-20
OPT1 Firewall rules: Allow all protocols from OPT1 subnet to *
CP Enabled on OPT1, redirection URL is my personal domain
Authentication is local user database.
I added a user for myself, and then hooked into that subnet with my netbook.When I try to go to (for example) imdb.com, and I get the login page. I login, then I am redirected to my personal domain.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy