Adguard on different networks
-
I have two networks:
10.10.10.0/24 (admin)
10.10.20.0/24 (guest)I also have adguard home installed.
Is there a way to run a different block list per network?
Or is there a way to install two instances of AdGuard Home, one for each network?
This is going to be pretty critical for this setup.
If AdGuard cannot do this do I have another option (plugin) that can be installed that will work?
Thank you,
Josh -
Probably. How/where is it installed? Just send different IPs for DNS to clients on each subnet.
-
I believe this is the guide I used a while back:
https://bobcares.com/blog/adguard-pfsense/
-
@cgi2099 said in Adguard on different networks:
https://bobcares.com/blog/adguard-pfsense/
Ah, you're actually running it on pfSense. Hmm, well depends what adguard can do then. Potentially I could imagine setting up different views in Unbound for different source ranges but you'd need to be able to query adblock differently to get different results. That is not a pfSense package so I'm not familiar with it.
-
@stephenw10
Thank you so much : )I will ask the AdGuard forum. From what I can tell and research, it is not possible from their GUI though.
My hope was that I could install two instances and cover one network for each install in pf.
-
Yeah it would need to support that specifically. Otherwise you could probably run two VMs for example.
