Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    one core on six core intel 12th gen cpu

    General pfSense Questions
    2
    5
    183
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      microsim1970
      last edited by

      Hello,
      I fall into this strange problem: on 12th Gen Intel(R) Core(TM) i5-12600 (six core), pfsense show only one core when I query:
      sysctl hw.ncpu
      hw.ncpu: 1

      and on
      sysctl kern.sched.topology_spec
      I got this:
      kern.sched.topology_spec: <groups>
      <group level="1" cache-level="0">
      <cpu count="1" mask="1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0">0</cpu>
      </group>
      </groups>

      Really I don't guess what can be happen or what I can be check to understand this issue.

      Anyone can help?
      Thanks,
      Gianluca

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        What does it show in the boot logs?

        What does top -HaSP show? Is it really only using one core?

        Which pfSense version?

        Steve

        1 Reply Last reply Reply Quote 0
        • M
          microsim1970
          last edited by

          Hi, and thx..
          this is top -HaSP:

          last pid: 71451;  load averages:  0.32,  0.27,  0.20                                                                                                                   up 5+20:54:33  19:55:40
303 threads:   2 running, 284 sleeping, 17 waiting
CPU:  0.0% user,  1.6% nice,  2.4% system,  0.0% interrupt, 96.1% idle
Mem: 169M Active, 651M Inact, 825M Wired, 56K Buf, 14G Free
ARC: 400M Total, 87M MFU, 299M MRU, 280K Anon, 2264K Header, 11M Other
     339M Compressed, 1053M Uncompressed, 3.11:1 Ratio
Swap: 1024M Total, 1024M Free

  PID USERNAME    PRI NICE   SIZE    RES STATE    TIME    WCPU COMMAND
   11 root        187 ki31     0B    16K RUN    125.0H  96.16% [idle]
46940 root         52   20   457M   378M bpf     18:52   1.61% /usr/local/bin/snort -R _11895 -M -D -q --suppress-config-log --daq pcap --daq-mode passive --treat-drop-as-alert -l /var/log/s
    0 root        -60    -     0B  1120K -       74:55   1.09% [kernel{if_io_tqg_0}]
    0 root        -64    -     0B  1120K -       21:38   0.30% [kernel{dummynet}]
    0 root        -60    -     0B  1120K -       15:29   0.18% [kernel{if_config_tqg_0}]
55830 root         20    0    14M  4288K RUN      0:00   0.15% top -HaSP
    7 root        -16    -     0B    16K pftm    10:28   0.12% [pf purge]
   12 root        -64    -     0B   256K WAIT    11:14   0.11% [intr{irq16: ath0}]
    2 root        -60    -     0B    16K WAIT     4:15   0.05% [clock]
18677 root         20    0    13M  2944K select   5:52   0.05% /usr/sbin/syslogd -s -c -c -l /var/dhcpd/var/run/log -P /var/run/syslog.pid -f /etc/syslog.conf
26660 root         20    0    13M  2772K nanslp   1:31   0.02% /usr/local/bin/dpinger -S -r 0 -i WAN_TIMGW -B 172.32.1.1 -p /var/run/dpinger_WAN_TIMGW~172.32.1.1~172.32.1.2.pid -u /var/run/d
 7705 root         20    0    13M  3600K bpf      8:13   0.02% /usr/local/sbin/filterlog -i pflog0 -p /var/run/filterlog.pid
36512 root         20    0    13M  2604K kqread   0:18   0.02% /usr/bin/tail_pfb -n0 -F /var/log/filter.log
37654 root         20    0    13M  2424K select   0:13   0.02% tail_pfb: system.fileargs (tail_pfb)
    0 root        -64    -     0B  1120K -        2:15   0.01% [kernel{ath0 taskq}]
 3464 root         20    0    20M  9456K select   0:19   0.01% /usr/local/sbin/openvpn --config /var/etc/openvpn/server5/config.ovpn{openvpn}
    8 root        -16    -     0B    16K -        0:40   0.01% [rand_harvestq]
36815 root         60    0    72M    49M piperd   2:51   0.01% /usr/local/bin/php_pfb -f /usr/local/pkg/pfblockerng/pfblockerng.inc filterlog
   17 root        -16    -     0B    16K tzpoll   0:06   0.01% [acpi_thermal]
    9 root        -16    -     0B    48K psleep   0:37   0.01% [pagedaemon{dom0}]
26545 root         20    0    13M  2776K nanslp   0:30   0.01% /usr/local/bin/dpinger -S -r 0 -i WAN_VODA -B 93.64.172.82 -p /var/run/dpinger_WAN_VODA~93.64.172.82~93.64.172.81.pid -u /var/r
48004 root         20    0    22M    11M select   0:00   0.01% sshd: admin@pts/0 (sshd)
26545 root         20    0    13M  2776K sbwait   0:14   0.00% /usr/local/bin/dpinger -S -r 0 -i WAN_VODA -B 93.64.172.82 -p /var/run/dpinger_WAN_VODA~93.64.172.82~93.64.172.81.pid -u /var/r
69396 root         20    0    20M  9904K select   0:07   0.00% /usr/local/sbin/openvpn --config /var/etc/openvpn/server1/config.ovpn{openvpn}
34429 root         20    0    20M  9832K kqread   0:07   0.00% /usr/local/sbin/lighttpd_pfb -f /var/unbound/pfb_dnsbl_lighty.conf
  399 root         20    0   107M    30M kqread   0:14   0.00% php-fpm: master process (/usr/local/lib/php-fpm.conf) (php-fpm)
86662 root         20    0    20M  9024K select   0:04   0.00% /usr/local/sbin/openvpn --config /var/etc/openvpn/server3/config.ovpn{openvpn}
94993 root         20    0    20M  9036K select   0:04   0.00% /usr/local/sbin/openvpn --config /var/etc/openvpn/server4/config.ovpn{openvpn}

          And the version:
          2.7.2-RELEASE (amd64)
          built on Wed Dec 6 21:10:00 CET 2023
          FreeBSD 14.0-CURRENT

          On dashboard, in affected system, I got this:
          affected.PNG

          and in other system not affected:
          not-affected.PNG

          I guess that probably the affected system have some bios related issue...

          1 Reply Last reply Reply Quote 0
          • M
            microsim1970
            last edited by

            this is the boot log:

            Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT amd64 1400094 #1 RELENG_2_7_2-n255948-8d2b56da39c: Wed Dec  6 20:45:47 UTC 2023
    root@freebsd:/var/jenkins/workspace/pfSense-CE-snapshots-2_7_2-main/obj/amd64/StdASW5b/var/jenkins/workspace/pfSense-CE-snapshots-2_7_2-main/sources/FreeBSD-src-RELENG_2_7_2/amd64.amd64/sys/pfSense amd64
FreeBSD clang version 16.0.6 (https://github.com/llvm/llvm-project.git llvmorg-16.0.6-0-g7cbf1a259152)
VT(vga): resolution 640x480
CPU: 12th Gen Intel(R) Core(TM) i5-12600 (3302.40-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x90675  Family=0x6  Model=0x97  Stepping=5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
  Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B>
  Structured Extended Features3=0xfc1c4410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0xd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16297463808 (15542 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
TCP_ratelimit: Is now initialized
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff807475a0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80747650, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80747700, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80765180, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80765230, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff807652e0, 0) error 1
random: entropy device external interface
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 14.0.
netgate0: <unknown hardware>
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x75d1f000-0x75d1f01e
smbios0: Version: 3.4, BCD Revision: 3.4
acpi0: <ALASKA A M I >
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 550
Event timer "HPET1" frequency 19200000 Hz quality 440
Event timer "HPET2" frequency 19200000 Hz quality 440
Event timer "HPET3" frequency 19200000 Hz quality 440
Event timer "HPET4" frequency 19200000 Hz quality 440
Event timer "HPET5" frequency 19200000 Hz quality 440
Event timer "HPET6" frequency 19200000 Hz quality 440
Event timer "HPET7" frequency 19200000 Hz quality 440
atrtc1: <AT realtime clock> on acpi0
atrtc1: Warning: Couldn't map I/O.
atrtc1: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ix0: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x7020-0x703f mem 0x86a00000-0x86afffff,0x86c04000-0x86c07fff at device 0.0 on pci1
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 1 RX queues 1 TX queues
ix0: Using MSI-X interrupts with 2 vectors
ix0: allocated for 1 queues
ix0: allocated for 1 rx queues
ix0: Ethernet address: 14:02:ec:77:48:ec
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: eTrack 0x80000897 PHY FW V65535
ix0: netmap queues/slots: TX 1/2048, RX 1/2048
ix1: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x7000-0x701f mem 0x86900000-0x869fffff,0x86c00000-0x86c03fff at device 0.1 on pci1
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 1 RX queues 1 TX queues
ix1: Using MSI-X interrupts with 2 vectors
ix1: allocated for 1 queues
ix1: allocated for 1 rx queues
ix1: Ethernet address: 14:02:ec:77:48:ed
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: eTrack 0x80000897 PHY FW V65535
ix1: netmap queues/slots: TX 1/2048, RX 1/2048
vgapci0: <VGA-compatible display> port 0x8000-0x803f mem 0x6002000000-0x6002ffffff,0x4000000000-0x400fffffff at device 2.0 on pci0
vgapci0: Boot video device
pcib2: <Intel Volume Management Device> mem 0x6000000000-0x6001ffffff,0x82000000-0x83ffffff,0x6003100000-0x60031fffff at device 14.0 on pci0
pci2: <PCI bus> on pcib2
xhci0: <Intel Alder Lake USB 3.2 controller> mem 0x6003200000-0x600320ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Alder Lake AHCI SATA controller> port 0x8090-0x8097,0x8080-0x8083,0x8060-0x807f mem 0x86e20000-0x86e21fff,0x86e23000-0x86e230ff,0x86e22000-0x86e227ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib3: <ACPI PCI-PCI bridge> at device 26.0 on pci0
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib5: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib6
pcib7: <PCI-PCI bridge> at device 2.0 on pci4
pci5: <PCI bus> on pcib7
igb0: <Intel(R) PRO/1000 ET(2) 82576 (Quad Copper)> port 0x4020-0x403f mem 0x85420000-0x8543ffff,0x85000000-0x853fffff,0x85444000-0x85447fff at device 0.0 on pci5
igb0: EEPROM V1.2-1 eTrack 0x00013d6e
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Using 1 RX queues 1 TX queues
igb0: Using MSI-X interrupts with 2 vectors
igb0: Ethernet address: 00:1b:21:ac:c1:54
igb0: netmap queues/slots: TX 1/1024, RX 1/1024
igb1: <Intel(R) PRO/1000 ET(2) 82576 (Quad Copper)> port 0x4000-0x401f mem 0x85400000-0x8541ffff,0x84c00000-0x84ffffff,0x85440000-0x85443fff at device 0.1 on pci5
igb1: EEPROM V1.2-1 eTrack 0x00013d6e
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Using 1 RX queues 1 TX queues
igb1: Using MSI-X interrupts with 2 vectors
igb1: Ethernet address: 00:1b:21:ac:c1:55
igb1: netmap queues/slots: TX 1/1024, RX 1/1024
pcib8: <PCI-PCI bridge> at device 4.0 on pci4
pci6: <PCI bus> on pcib8
igb2: <Intel(R) PRO/1000 ET(2) 82576 (Quad Copper)> port 0x3020-0x303f mem 0x84820000-0x8483ffff,0x84400000-0x847fffff,0x84844000-0x84847fff at device 0.0 on pci6
igb2: EEPROM V1.2-1 eTrack 0x00013d70
igb2: Using 1024 TX descriptors and 1024 RX descriptors
igb2: Using 1 RX queues 1 TX queues
igb2: Using MSI-X interrupts with 2 vectors
igb2: Ethernet address: 00:1b:21:ac:c1:56
igb2: netmap queues/slots: TX 1/1024, RX 1/1024
igb3: <Intel(R) PRO/1000 ET(2) 82576 (Quad Copper)> port 0x3000-0x301f mem 0x84800000-0x8481ffff,0x84000000-0x843fffff,0x84840000-0x84843fff at device 0.1 on pci6
igb3: EEPROM V1.2-1 eTrack 0x00013d70
igb3: Using 1024 TX descriptors and 1024 RX descriptors
igb3: Using 1 RX queues 1 TX queues
igb3: Using MSI-X interrupts with 2 vectors
igb3: Ethernet address: 00:1b:21:ac:c1:57
igb3: netmap queues/slots: TX 1/1024, RX 1/1024
pcib9: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci7: <ACPI PCI bus> on pcib9
ath0: <Atheros AR946x/AR948x> mem 0x86d00000-0x86d7ffff at device 0.0 on pci7
ar9300_flash_map: unimplemented for now
Restoring Cal data from DRAM
Restoring Cal data from EEPROM
Restoring Cal data from Flash
Restoring Cal data from Flash
Restoring Cal data from OTP
ar9300_hw_attach: ar9300_eeprom_attach returned 0
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] LDPC transmit/receive enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR9460 mac 640.2 RF5110 phy 819.4
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Alder Lake HDA Controller> mem 0x6003218000-0x600321bfff,0x6003000000-0x60030fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
em0: <Intel(R) I219-V ADL(17)> mem 0x86e00000-0x86e1ffff at device 31.6 on pci0
em0: EEPROM V2.3-4
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 50:eb:f6:94:31:e1
em0: netmap queues/slots: TX 1/1024, RX 1/1024
acpi_button0: <Sleep Button> on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ns8250: UART FCR is broken
ns8250: UART FCR is broken
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ns8250: UART FCR is broken
uart0: console (115200,n,8,1)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
atrtc0: Can't map interrupt.
hwpstate_intel0: <Intel Speed Shift> on cpu0
Timecounter "TSC-low" frequency 1651204156 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
usbus0: 5.0Gbps Super Speed USB v3.0
hdacc0: <Realtek ALC897 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC897 (Rear Analog)> at nid 20 and 24,26 on hdaa0
pcm1: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC897 (Internal Digital)> at nid 17 on hdaa0
hdacc1: <Intel Alder Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Alder Lake Audio Function Group> at nid 1 on hdacc1
pcm3: <Intel Alder Lake (HDMI/DP 8ch)> at nid 4 on hdaa1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:pfSense/ROOT/default []...
Root mount waiting for: usbus0 CAM
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <vendor 0x058f product 0x6254> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x058f product 0x6254, class 9/0, rev 2.00/1.00, addr 1> on usbus0
Root mount waiting for: usbus0 CAM
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <ASUS TEK. ASM107x> at usbus0
uhub2 on uhub0
uhub2: <ASUS TEK. ASM107x, class 9/0, rev 2.10/0.01, addr 2> on usbus0
uhub2: MTT enabled
Root mount waiting for: usbus0 CAM
uhub2: 4 ports with 4 removable, self powered
ugen0.4: <AsusTek Computer Inc. AURA LED Controller> at usbus0
uhid0 on uhub0
uhid0: <AsusTek Computer Inc. AURA LED Controller, class 0/0, rev 2.00/1.00, addr 3> on usbus0
Root mount waiting for: usbus0 CAM
ugen0.5: <vendor 0x8087 product 0x0026> at usbus0
ugen0.6: <ASUS TEK. ASM107x> at usbus0
uhub3 on uhub0
uhub3: <ASUS TEK. ASM107x, class 9/0, rev 3.00/0.01, addr 5> on usbus0
Root mount waiting for: usbus0 CAM
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich4 bus 0 scbus0 target 0 lun 0
ada0: <TS128GSSD370S O1225G> ACS-2 ATA SATA 3.x device
ada0: Serial Number D536923642
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 1024bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors)
ses0: pass0,ada0 in 'Slot 04', SATA Slot: scbus0 target 0
Dual Console: Serial Primary, Video Secondary
CPU: 12th Gen Intel(R) Core(TM) i5-12600 (3302.41-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x90675  Family=0x6  Model=0x97  Stepping=5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x239ca7eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
  Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B>
  Structured Extended Features3=0xfc1c4410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x88fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO>
  VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              It certainly could be a BIOS setting.

              But try running: sysctl kern.smp

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.