Multi WAN

[Altamir]

Olá caros amigos!!
Tenho em meu ambiente um pfSense e recentemente configurei dois links de internet um VIVO e o outro CLARO, e a rede se comportando perfeitamente desliga um o outro assume sem problemas resolveu meu problema na instabilidade do fornecimento de internet, porem não concigo acessar o modem da CLARO somente o modem VIVO que foi configurado inicialmente
Como devo configurar para que da minha estação que esta na LAN eu acesse os dois modems
Obrigado pela ajuda e habitual atenção

[marcg]

The following should work,

• pfSense VIVO and Claro WAN interfaces are on different subnets (e.g., don't configure the LAN-side addresses of the VIVO and Claro gateways to both be 192.168.1.1)
• firewall rules permit access from your internal network to the VIVO and Claro management addresses

[Altamir]

@marcg

Firstly, I want to thank you for your attention
Thank you very much

Marcg, sorry, I didn't understand your explanation of how from the LAN network I will access the interface of the two modems

So I would have to change the gateways but I already did that, here it is like this

WAN_VIVO 192.168.100.0
WAN_CLARO 192.168.150.0

LAN 192.168.0.1

From the LAN, only the VIVO modem can be accessed

[marcg]

Do your firewall rules allow traffic from the LAN network to the WAN_CLARO network?

[chpalmer]

@Altamir said in Multi WAN:

Is the Claro modem using PPPoe or PPPoa by chance?