Traffic throttled to 100Mbs
-
Ok, so details out of the way first.
Hardware: Netgate 7100
Version: 24.03-Release (issue started during v23)
CPU Usage: ~22%
Memory Usage 4% of 24GB
ISP: 250/250 Fiber
Switch: Unifi 48 port POESo here is the weirdness. Any traffic the goes to trough the firewall throttles down to 100Mbs.
Tests I have done:
I ran Speedtest from the PFSense command line and I get 250Mbs.
I run IPerf between to PCs on the same VLAN and I get full 1Gbs
I run IPerf on the router to a PC and I get 100Mbs
I run IPerf between 2 PCs on different VLANs and I get 100Mbs.From the Unifi Switch to the PFSense is a 10Gb DAC, I have tried different cables.
The Unifi link speed is set to 10Gpbs FDX from Auto
I have turned off all Hardware Offloading in System, Advanced, Networking........ And as I was looking for the QoS settings, I found it. <facepalm>
OK, so I'll finish posting my L here just so people know how to fix QoS.
Firewall -> Traffic Shaper -> Interface Name (Click the FOLDER! not the items in the folder.)
Changed bandwidth from 100Mbs/s to 10GBit/s, now getting full speed on everything.Well, if nothing else, it goes to show that when you write your problem down, you can most likely solve the problem.
Have a good weekend folks,
Rick
-
@MedfordTech said in Traffic throttled to 100Mbs:
Well, if nothing else, it goes to show that when you write your problem down, you can most likely solve the problem.
Going through all the things that should be added to the post so someone else can help you - yup is quite often a trigger that hey did I check that, or what about this, etc..
Glad you got it sorted.
