FQDN resolving with DNS to external IP but internal IP being returned with ping

[sogorman]

I have a 192.168.0.0/24 network with some external facing services. When i attempt to connect to one of those FQDN names the DNS lookup works as expected but traffic gets routed / returned to the internal address and not the address on the FQDN.

sogorman@01:~$ ifconfig
enp101s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.60  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::265e:beff:fe65:a21c  prefixlen 64  scopeid 0x20<link>
        ether 24:5e:be:65:a2:1c  txqueuelen 1000  (Ethernet)
        RX packets 630027474  bytes 131611471924 (131.6 GB)
        RX errors 0  dropped 2946716  overruns 0  frame 0
        TX packets 679507865  bytes 285142565720 (285.1 GB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 2279609  bytes 405157505 (405.1 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2279609  bytes 405157505 (405.1 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

sogorman@01:~$ ping local.redacted.com
PING local.redacted.com (72.44.xxx.xxx) 56(84) bytes of data.
64 bytes from 192.168.0.7: icmp_seq=1 ttl=128 time=0.411 ms (DIFFERENT ADDRESS!)
64 bytes from 192.168.0.7: icmp_seq=2 ttl=128 time=0.320 ms (DIFFERENT ADDRESS!)
64 bytes from 192.168.0.7: icmp_seq=3 ttl=128 time=0.358 ms (DIFFERENT ADDRESS!)
64 bytes from 192.168.0.7: icmp_seq=4 ttl=128 time=0.334 ms (DIFFERENT ADDRESS!)
^C

[johnpoz]

@sogorman Are you doing say a 1:1 nat?

[sogorman]

@johnpoz yes for those external IPs there is a 1:1 inbound nat... which I believe I want for the external traffic to resolve properly, only issue is with Internal traffic trying to resolve the external FQDN


[johnpoz]

@sogorman well you don't really need to do a 1:1, you could do simple port forwards for the ports you want vs all of them ;)

So you want this fqdn to resolve to the internal IP? Just setup a host override so your local.redacted.com resolves to the 192.168.0.7

What your seeing now is WAD, Works As Designed.