Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    DESPERATE--Trying to setup an SG-1100 as a firewall bridge to my lab network

    Scheduled Pinned Locked Moved NAT
    1 Posts 1 Posters 161 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • W
      warlxiano
      last edited by warlxiano

      I am new to this. This is the first actual hardware I have purchased from Netgate. I have used PfSense as a virtual firewall on Proxmox, but I am having problems.

      I have Spectrum home with my own Arris Surfboard modem. I have a TpLink BE11000 as my main router. I have my printer on port 4, my Mesh TPLink Deco mesh router on port 2 which is my home network, i have a Honeypot on port 3, Port 4 goes to my Netgate sg-1100 , my Netgate goes to a Netgear gs1108PE switch and that switch is what my lab runs off of. I am trying to get an IP from the BE11000 to wan on my SG-1100 and I want LAN to route address under the 192.168.0.1 range. That is what I run my lab cluster of 8 servers from. It appears I have that all correct, but I am getting no in or out traffic through the LAN 192.168.0.1?
      Am I making any sense? I want my home network to run through my mesh system and my LAB (with all kinds of cyber security labs all built through Proxmox) to be routed through my firewall under the 192.168.0.1/24 range

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.