0.95 and CARP



  • I've been running 2 pfSense boxes with CARP for about 2 months now without any problems.  After upgrading to 0.95, I have been unable to get any settings to sync from the primary pfsense box to the secondary pfsense box.  Following is what shows up in the logs.  Any suggestions as to what I should try?

    php: : An error code was received while syncing configuration data with https://192.168.69.2:443 - Code 2: Invalid return payload: enable debugging to examine incoming payload
    

    Following is my setup:

    pfSense1
    LAN:  10.20.1.5
    WAN:  216.x.x.140
    OPT1: 192.168.69.1

    pfsense2
    LAN:  10.20.1.6
    WAN:  216.x.x.141
    OPT1: 192.168.69.2

    Carp0: 10.20.1.10
    Carp1: 216.x.x.142



  • same with 0.94.10



  • I did not try 0.94.10, but I did not have any problems with 0.94.12



  • @kikawala:

    I did not try 0.94.10, but I did not have any problems with 0.94.12

    Known problem, colin is working on configuration sync.


Log in to reply