Trouble routing Wireguard tunnel (configured on FW) through WAN2 interface
-
I have 2 WAN connections and a Wireguard tunnel that is configured on the firewall connecting to a VPN service. I want to ensure the Wireguard connection uses the WAN2 (non default gateway) interface for all traffic but I'm having trouble finding good information on how to get this working.
I read that a static route for the peer endpoint IP routing out the WAN2 interface is what's needed. For me this, didn't work.
I also read that it should be a policy route but I can't find any information on what interface the rule would go on. I tried a floating rule but again, no dice.
Information on how to policy route connections that originate on the FW is very sparce so I'm hoping someone who is doing what I'm doing can chime in with some specifics to help me with this.
-
@JimPhreak said in Trouble routing Wireguard tunnel (configured on FW) through WAN2 interface:
For me this, didn't work.
Why do you think that.
-
@Bob-Dig Because I still saw all the traffic still going out my WAN1 interface and my WAN2 interface is idle.
