NAT rules question

killmasta93

Hi Currently was wondering if someone could share some light on the issue im having,

Currently installing Mirotalk selfhosted, When i NAT the ports i can access it out side of the network but internally cant access it,

Currently i was reading https://docs.netgate.com/pfsense/en/latest/troubleshooting/asymmetric-routing.html
but not sure if this applies to this?

As currently the NAT public IP is 181.xx.xx.xx.287

and my public IP which im running 181.xx.xx.xx.238

I cant do the Split DNS because mirotalk has to use the external IP and not the internally ip

I was checking the states and found the packets being dropped

LAN tcp 192.168.1.143:64412 -> 192.168.3.52:80 (181.xxxx.237:80) CLOSED:SYN_SENT 5 / 0 260 B / 0 B 
WAN2 tcp 181.xxx.xxx:40251 (192.168.1.143:64412) -> 192.168.3.52:80 SYN_SENT:CLOSED 5 / 0 260 B / 0 B 
LAN tcp 192.168.1.143:64414 -> 192.168.3.52:80 (181.xxxx.237:80) CLOSED:SYN_SENT 5 / 0 260 B / 0 B 
WAN2 tcp 181.xxx.238:36171 (192.168.1.143:64414) -> 192.168.3.52:80 SYN_SENT:CLOSED 5 / 0 260 B / 0 B 
LAN tcp 192.168.1.143:64415 -> 192.168.3.52:80 (181.xxxx.237:80) CLOSED:SYN_SENT

already tried Enable NAT Reflection for 1:1 NAT and Enable automatic outbound NAT for Reflection.
also On NAT rules, set NAT reflection to Enabled (Pure NAT).